To prepare the driver to receive drm_connector only in the get_modes() callback, move bus_flags handling to ili9322_get_modes(). Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx> Cc: Thierry Reding <thierry.reding@xxxxxxxxx> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx> --- drivers/gpu/drm/panel/panel-ilitek-ili9322.c | 34 +++++++++----------- 1 file changed, 16 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c index 53dd1e128795..3c58f63adbf7 100644 --- a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c @@ -349,7 +349,6 @@ static const struct regmap_config ili9322_regmap_config = { static int ili9322_init(struct drm_panel *panel, struct ili9322 *ili) { - struct drm_connector *connector = panel->connector; u8 reg; int ret; int i; @@ -407,23 +406,11 @@ static int ili9322_init(struct drm_panel *panel, struct ili9322 *ili) * Polarity and inverted color order for RGB input. * None of this applies in the BT.656 mode. */ - if (ili->conf->dclk_active_high) { + reg = 0; + if (ili->conf->dclk_active_high) reg = ILI9322_POL_DCLK; - connector->display_info.bus_flags |= - DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE; - } else { - reg = 0; - connector->display_info.bus_flags |= - DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE; - } - if (ili->conf->de_active_high) { + if (ili->conf->de_active_high) reg |= ILI9322_POL_DE; - connector->display_info.bus_flags |= - DRM_BUS_FLAG_DE_HIGH; - } else { - connector->display_info.bus_flags |= - DRM_BUS_FLAG_DE_LOW; - } if (ili->conf->hsync_active_high) reg |= ILI9322_POL_HSYNC; if (ili->conf->vsync_active_high) @@ -659,9 +646,20 @@ static int ili9322_get_modes(struct drm_panel *panel) struct drm_connector *connector = panel->connector; struct ili9322 *ili = panel_to_ili9322(panel); struct drm_display_mode *mode; + struct drm_display_info *info; + + info = &connector->display_info; + info->width_mm = ili->conf->width_mm; + info->height_mm = ili->conf->height_mm; + if (ili->conf->dclk_active_high) + info->bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE; + else + info->bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE; - connector->display_info.width_mm = ili->conf->width_mm; - connector->display_info.height_mm = ili->conf->height_mm; + if (ili->conf->de_active_high) + info->bus_flags |= DRM_BUS_FLAG_DE_HIGH; + else + info->bus_flags |= DRM_BUS_FLAG_DE_LOW; switch (ili->input) { case ILI9322_INPUT_SRGB_DUMMY_320X240: -- 2.20.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel