The following errors show up when booting the Nexus 5:
msm_dsi_phy fd922a00.dsi-phy: [drm:dsi_phy_driver_probe] *ERROR*
dsi_phy_regulator_init: failed to init regulator, ret=-517
msm_dsi_phy fd922a00.dsi-phy: [drm:dsi_phy_driver_probe] *ERROR*
dsi_phy_driver_probe: failed to init regulator
dsi_phy_regulator_init() already logs the error, so no need to log
the same error a second time in dsi_phy_driver_probe(). This patch
also changes dsi_phy_regulator_init() to not log the error if the
error code is -EPROBE_DEFER to reduce noise in dmesg.
Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 4097eca1b3ef..d0e1cc6728dc 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -396,8 +396,11 @@ static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
ret = devm_regulator_bulk_get(dev, num, s);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "%s: failed to init regulator, ret=%d\n",
- __func__, ret);
+ if (ret != -EPROBE_DEFER)
+ DRM_DEV_ERROR(dev,
+ "%s: failed to init regulator, ret=%d\n",
+ __func__, ret);
+
return ret;
}
@@ -584,10 +587,8 @@ static int dsi_phy_driver_probe(struct platform_device *pdev)
}
ret = dsi_phy_regulator_init(phy);
- if (ret) {
- DRM_DEV_ERROR(dev, "%s: failed to init regulator\n", __func__);
+ if (ret)
goto fail;
- }
phy->ahb_clk = msm_clk_get(pdev, "iface");
if (IS_ERR(phy->ahb_clk)) {
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
