Daniel,
On 02/07/2019 11:58, Daniel Thompson wrote:
On Mon, Jul 01, 2019 at 05:14:23PM +0200, Jean-Jacques Hiblot wrote:
From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Add DT binding for led-backlight.
I think the patchset is in the wrong order; the DT bindings
documentation should appear *before* the binding is
implemented (amoung other things this prevent transient checkpatch
warnings as the patchset is applied).
ok
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@xxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
.../video/backlight/led-backlight.txt | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/backlight/led-backlight.txt
diff --git a/Documentation/devicetree/bindings/video/backlight/led-backlight.txt b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
new file mode 100644
index 000000000000..216cd52d624a
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/led-backlight.txt
@@ -0,0 +1,39 @@
+led-backlight bindings
+
+The node of the backlight driver IS the node of the LED.
+
+Required properties:
+ - compatible: "led-backlight"
+ - brightness-levels: Array of distinct LED brightness levels. These
+ are in the range from 0 to 255, passed to the LED class driver.
+ - default-brightness-level: the default brightness level (index into the
+ array defined by the "brightness-levels" property)
I think brightness-levels and default-brightness-level could be
optional properties since a default 1:1 mapping seems reasonable given
how constrained the LED brightness values are.
That is probably a good idea. Expect it in v2
Thanks,
JJ
Daniel.
+
+Optional properties:
+ - power-supply: regulator for supply voltage
+ - enable-gpios: contains a single GPIO specifier for the GPIO which enables
+ and disables the backlight (see GPIO binding[0])
+
+[0]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+
+led_ctrl {
+ red_led@1 {
+ label = "red";
+ reg = <1>;
+ }
+
+ backlight_led@2 {
+ function = LED_FUNCTION_BACKLIGHT;
+ reg = <2>;
+
+ compatible = "led-backlight";
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+
+ power-supply = <&vdd_bl_reg>;
+ enable-gpios = <&gpio 58 0>;
+ };
+};
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
