[GIT PULL] ARM (for-airlie-armada branch)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi David,

The following changes since commit e93c9c99a629c61837d5a7fc2120cd2b6c70dbdd:

  Linux 5.1 (2019-05-05 17:42:58 -0700)

are available in the git repository at:

  git://git.armlinux.org.uk/~rmk/linux-arm.git for-airlie-armada

for you to fetch changes up to 837567c1e9d587c0b438263c9cfd32de46640e16:

  drm/armada: no need to check parent of remote (2019-06-28 14:50:07 +0100)

----------------------------------------------------------------
Armada DRM updates:
- Fix interlace support.
- use __drm_atomic_helper_plane_reset in overlay reset.
- since the overlay and video planes use essentially the same format
  registers, precompute their values while validating.
- fix a long-standing deficiency with overlay planes and interlace modes
- calculate plane starting address at atomic_check stage rather than
  when we're programming the registers.
- add gamma support.
- ensure mode adjustments made by other components are properly handled
  in the driver and applied to the CRTC-programmed mode.
- add and use register definitions for the "REG4F" register.
- use drm_atomic_helper_shutdown() when tearing down to ensure that the
  hardware is properly shutdown.
- add CRTC-level mode validation to ensure that we don't allow a mode
  that the CRTC-level hardware can not support.
- improve the clocking selection for Armada 510 support.
- move CRTC debugfs files into the crtc-specific directory, using the
  DRM helper to create these files.
- patch from Lubomir Rintel to replace a simple framebuffer.
- use the OF graph walker rather than open-coding this.
- eliminate a useless check for the availability of the remote's parent
  which isn't required.

----------------------------------------------------------------
Lubomir Rintel (1):
      drm/armada: replace the simple-framebuffer

Russell King (17):
      drm/armada: fix crtc interlace
      drm/armada: use __drm_atomic_helper_plane_reset in overlay reset
      drm/armada: add plane size/location accessors
      drm/armada: fix plane location and size for interlace
      drm/armada: add missing interlaced support for overlay frame
      drm/armada: move plane address and pitch calculation to atomic_check
      drm/armada: add support for setting gamma
      drm/armada: add comments about HWC32 cursor colour format
      drm/armada: add drm_mode_set_crtcinfo() mode fixup
      drm/armada: add and use definitions for RDREG4F
      drm/armada: add drm_atomic_helper_shutdown() call in tear-down
      drm/armada: add CRTC mode validation
      drm/armada: improve Dove clock selection
      drm/armada: use mode_valid to validate the adjusted mode
      drm/armada: redo CRTC debugfs files
      drm/armada: use for_each_endpoint_of_node() to walk crtc endpoints
      drm/armada: no need to check parent of remote

 drivers/gpu/drm/armada/armada_510.c     | 130 +++++++++++++------
 drivers/gpu/drm/armada/armada_crtc.c    | 214 ++++++++++++++++++++++++++++++--
 drivers/gpu/drm/armada/armada_crtc.h    |  21 +++-
 drivers/gpu/drm/armada/armada_debugfs.c |  98 ++++++---------
 drivers/gpu/drm/armada/armada_drm.h     |   1 +
 drivers/gpu/drm/armada/armada_drv.c     |  38 +++---
 drivers/gpu/drm/armada/armada_hw.h      |  29 +++--
 drivers/gpu/drm/armada/armada_overlay.c |  56 ++++-----
 drivers/gpu/drm/armada/armada_plane.c   | 124 ++++++++++++------
 drivers/gpu/drm/armada/armada_plane.h   |  23 ++++
 10 files changed, 522 insertions(+), 212 deletions(-)
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux