On 27.06.2019 17:18, Matt Redfearn wrote: > In contrast to all of the DSI panel drivers in drivers/gpu/drm/panel > which attach to the DSI host via mipi_dsi_attach() at probe time, the > ADV7533 bridge device does not. Instead it defers this to the point that > the upstream device connects to its bridge via drm_bridge_attach(). > The generic Synopsys MIPI DSI host driver does not register it's own > drm_bridge until the MIPI DSI has attached. But it does not call > drm_bridge_attach() on the downstream device until the upstream device > has attached. This leads to a chicken and the egg failure and the DRM > pipeline does not complete. > Since all other mipi_dsi_device drivers call mipi_dsi_attach() in > probe(), make the adv7533 mipi_dsi_device do the same. This ensures that > the Synopsys MIPI DSI host registers it's bridge such that it is > available for the upstream device to connect to. > > Signed-off-by: Matt Redfearn <matt.redfearn@xxxxxxxxxx> Queued to drm-misc-next. Regards Andrzej > > --- > > Changes in v2: > Cleanup if adv7533_attach_dsi fails. > > drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 +++++++++--- > 1 file changed, 9 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c > index e7ddd3e3db9..807827bd910 100644 > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c > @@ -874,9 +874,6 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge) > &adv7511_connector_helper_funcs); > drm_connector_attach_encoder(&adv->connector, bridge->encoder); > > - if (adv->type == ADV7533) > - ret = adv7533_attach_dsi(adv); > - > if (adv->i2c_main->irq) > regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0), > ADV7511_INT0_HPD); > @@ -1222,8 +1219,17 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id) > drm_bridge_add(&adv7511->bridge); > > adv7511_audio_init(dev, adv7511); > + > + if (adv7511->type == ADV7533) { > + ret = adv7533_attach_dsi(adv7511); > + if (ret) > + goto err_remove_bridge; > + } > + > return 0; > > +err_remove_bridge: > + drm_bridge_remove(&adv7511->bridge); > err_unregister_cec: > i2c_unregister_device(adv7511->i2c_cec); > if (adv7511->cec_clk) _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel