Hi, Jitao:
On Thu, 2019-06-27 at 10:59 +0800, Jitao Shi wrote:
> This patch add mt8183 mipi_tx driver.
> And also support other chips that use the same binding and driver.
>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/Makefile | 1 +
> drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 2 +
> drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 1 +
> drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 181 ++++++++++++++++++
> 4 files changed, 185 insertions(+)
> create mode 100644 drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
>
> diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
> index 2c8de1f5a5ee..8067a4be8311 100644
> --- a/drivers/gpu/drm/mediatek/Makefile
> +++ b/drivers/gpu/drm/mediatek/Makefile
> @@ -13,6 +13,7 @@ mediatek-drm-y := mtk_disp_color.o \
> mtk_dsi.o \
> mtk_mipi_tx.o \
> mtk_mt8173_mipi_tx.o \
> + mtk_mt8183_mipi_tx.o \
> mtk_dpi.o
>
> obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
> diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> index cdc68b88cefd..ab0fbfba5572 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c
> @@ -182,6 +182,8 @@ static const struct of_device_id mtk_mipi_tx_match[] = {
> .data = &mt2701_mipitx_data },
> { .compatible = "mediatek,mt8173-mipi-tx",
> .data = &mt8173_mipitx_data },
> + { .compatible = "mediatek,mt8183-mipi-tx",
> + .data = &mt8183_mipitx_data },
> { },
> };
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> index 660726924992..3fd24563952e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h
> @@ -45,5 +45,6 @@ unsigned long mtk_mipi_tx_pll_recalc_rate(struct clk_hw *hw,
>
> extern const struct mtk_mipitx_data mt2701_mipitx_data;
> extern const struct mtk_mipitx_data mt8173_mipitx_data;
> +extern const struct mtk_mipitx_data mt8183_mipitx_data;
>
> #endif
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> new file mode 100644
> index 000000000000..7758bc95555c
> --- /dev/null
> +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> @@ -0,0 +1,181 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019 MediaTek Inc.
> + * Author: jitao.shi <jitao.shi@xxxxxxxxxxxx>
> + */
> +
> +#include "mtk_mipi_tx.h"
> +
> +#define MIPITX_LANE_CON 0x000c
> +#define RG_DSI_CPHY_T1DRV_EN BIT(0)
> +#define RG_DSI_ANA_CK_SEL BIT(1)
> +#define RG_DSI_PHY_CK_SEL BIT(2)
> +#define RG_DSI_CPHY_EN BIT(3)
> +#define RG_DSI_PHYCK_INV_EN BIT(4)
> +#define RG_DSI_PWR04_EN BIT(5)
> +#define RG_DSI_BG_LPF_EN BIT(6)
> +#define RG_DSI_BG_CORE_EN BIT(7)
> +#define RG_DSI_PAD_TIEL_SEL BIT(8)
> +
> +#define MIPITX_PLL_PWR 0x0028
> +#define MIPITX_PLL_CON0 0x002c
> +#define MIPITX_PLL_CON1 0x0030
> +#define MIPITX_PLL_CON2 0x0034
> +#define MIPITX_PLL_CON3 0x0038
> +#define MIPITX_PLL_CON4 0x003c
> +#define RG_DSI_PLL_IBIAS (3 << 10)
> +
> +#define MIPITX_D2_SW_CTL_EN 0x0144
> +#define MIPITX_D0_SW_CTL_EN 0x0244
> +#define MIPITX_CK_CKMODE_EN 0x0328
> +#define DSI_CK_CKMODE_EN BIT(0)
> +#define MIPITX_CK_SW_CTL_EN 0x0344
> +#define MIPITX_D1_SW_CTL_EN 0x0444
> +#define MIPITX_D3_SW_CTL_EN 0x0544
> +#define DSI_SW_CTL_EN BIT(0)
> +#define AD_DSI_PLL_SDM_PWR_ON BIT(0)
> +#define AD_DSI_PLL_SDM_ISO_EN BIT(1)
> +
> +#define RG_DSI_PLL_EN BIT(4)
> +#define RG_DSI_PLL_POSDIV (0x7 << 8)
> +
> +static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw)
> +{
> + struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw);
> + int ret = 0;
> +
> + ret = clk_prepare(mipi_tx->ref_clk);
In mtk_mipi_tx_power_on(), it calls
clk_prepare_enable(mipi_tx->pll);
This function break into
clk_prepare(mipi_tx->pll);
and
clk_enable(mipi_tx->pll);
In clk_prepare(), it would finally call into clk_core_prepare() [1], and
you could see
ret = clk_core_prepare(core->parent);
if (core->ops->prepare)
ret = core->ops->prepare(core->hw);
This mean, before this clock is prepare, ccf would prepare its parent
clock, so you need not to prepare parent clock in this clock's prepare
callback function.
[1]
https://elixir.bootlin.com/linux/v5.2-rc6/source/drivers/clk/clk.c#L836
> + if (ret < 0)
> + dev_err(mipi_tx->dev,
> + "can't prepare mipi_tx ref_clk %d\n", ret);
> +
> + return ret;
> +}
> +
> +static int mtk_mipi_tx_pll_enable(struct clk_hw *hw)
> +{
> + struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw);
> + unsigned int txdiv, txdiv0;
> + u64 pcw;
> + int ret;
> +
> + dev_dbg(mipi_tx->dev, "enable: %u bps\n", mipi_tx->data_rate);
> +
> + if (mipi_tx->data_rate >= 2000000000) {
> + txdiv = 1;
> + txdiv0 = 0;
> + } else if (mipi_tx->data_rate >= 1000000000) {
> + txdiv = 2;
> + txdiv0 = 1;
> + } else if (mipi_tx->data_rate >= 500000000) {
> + txdiv = 4;
> + txdiv0 = 2;
> + } else if (mipi_tx->data_rate > 250000000) {
> + txdiv = 8;
> + txdiv0 = 3;
> + } else if (mipi_tx->data_rate >= 125000000) {
> + txdiv = 16;
> + txdiv0 = 4;
> + } else {
> + return -EINVAL;
> + }
> +
> + ret = clk_enable(mipi_tx->ref_clk);
Ditto.
Regards,
CK
> + if (ret < 0) {
> + dev_err(mipi_tx->dev,
> + "can't enable mipi_tx ref_clk %d\n", ret);
> + return ret;
> + }
> +
> + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_CON4, RG_DSI_PLL_IBIAS);
> +
> + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_PWR_ON);
> + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_CON1, RG_DSI_PLL_EN);
> + udelay(1);
> + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_ISO_EN);
> + pcw = div_u64(((u64)mipi_tx->data_rate * txdiv) << 24, 26000000);
> + writel(pcw, mipi_tx->regs + MIPITX_PLL_CON0);
> + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_PLL_CON1, RG_DSI_PLL_POSDIV,
> + txdiv0 << 8);
> + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_PLL_CON1, RG_DSI_PLL_EN);
> +
> + return 0;
> +}
> +
> +static void mtk_mipi_tx_pll_unprepare(struct clk_hw *hw)
> +{
> + struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw);
> +
> + clk_unprepare(mipi_tx->ref_clk);
> +}
> +
> +static void mtk_mipi_tx_pll_disable(struct clk_hw *hw)
> +{
> + struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw);
> +
> + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_CON1, RG_DSI_PLL_EN);
> +
> + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_ISO_EN);
> + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_PWR_ON);
> + clk_disable(mipi_tx->ref_clk);
> +}
> +
> +static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *prate)
> +{
> + return clamp_val(rate, 50000000, 1600000000);
> +}
> +
> +static const struct clk_ops mtk_mipi_tx_pll_ops = {
> + .prepare = mtk_mipi_tx_pll_prepare,
> + .enable = mtk_mipi_tx_pll_enable,
> + .unprepare = mtk_mipi_tx_pll_unprepare,
> + .disable = mtk_mipi_tx_pll_disable,
> + .round_rate = mtk_mipi_tx_pll_round_rate,
> + .set_rate = mtk_mipi_tx_pll_set_rate,
> + .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
> +};
> +
> +static void mtk_mipi_tx_power_on_signal(struct phy *phy)
> +{
> + struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> +
> + /* BG_LPF_EN / BG_CORE_EN */
> + writel(RG_DSI_PAD_TIEL_SEL | RG_DSI_BG_CORE_EN,
> + mipi_tx->regs + MIPITX_LANE_CON);
> + usleep_range(30, 100);
> + writel(RG_DSI_BG_CORE_EN | RG_DSI_BG_LPF_EN,
> + mipi_tx->regs + MIPITX_LANE_CON);
> +
> + /* Switch OFF each Lane */
> + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D0_SW_CTL_EN, DSI_SW_CTL_EN);
> + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D1_SW_CTL_EN, DSI_SW_CTL_EN);
> + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D2_SW_CTL_EN, DSI_SW_CTL_EN);
> + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN);
> + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
> +
> + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
> +}
> +
> +static void mtk_mipi_tx_power_off_signal(struct phy *phy)
> +{
> + struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> +
> + /* Switch ON each Lane */
> + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D0_SW_CTL_EN, DSI_SW_CTL_EN);
> + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D1_SW_CTL_EN, DSI_SW_CTL_EN);
> + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D2_SW_CTL_EN, DSI_SW_CTL_EN);
> + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN);
> + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN);
> +
> + writel(RG_DSI_PAD_TIEL_SEL | RG_DSI_BG_CORE_EN,
> + mipi_tx->regs + MIPITX_LANE_CON);
> + writel(RG_DSI_PAD_TIEL_SEL, mipi_tx->regs + MIPITX_LANE_CON);
> +}
> +
> +const struct mtk_mipitx_data mt8183_mipitx_data = {
> + .mipi_tx_clk_ops = &mtk_mipi_tx_pll_ops,
> + .mipi_tx_enable_signal = mtk_mipi_tx_power_on_signal,
> + .mipi_tx_disable_signal = mtk_mipi_tx_power_off_signal,
> +};
> +
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
