From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> We want to remove the hacky platform data callback for power control. Add a regulator to the driver data and enable/disable it next to the current panel_power_ctrl() calls. We will use it in subsequent patch on da850-evm. Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> --- drivers/video/fbdev/da8xx-fb.c | 54 ++++++++++++++++++++++++++++++---- 1 file changed, 49 insertions(+), 5 deletions(-) diff --git a/drivers/video/fbdev/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c index 9ea817ac1d81..4fa99ff79f3b 100644 --- a/drivers/video/fbdev/da8xx-fb.c +++ b/drivers/video/fbdev/da8xx-fb.c @@ -19,6 +19,7 @@ #include <linux/clk.h> #include <linux/cpufreq.h> #include <linux/console.h> +#include <linux/regulator/consumer.h> #include <linux/spinlock.h> #include <linux/slab.h> #include <linux/delay.h> @@ -165,6 +166,7 @@ struct da8xx_fb_par { #endif unsigned int lcdc_clk_rate; void (*panel_power_ctrl)(int); + struct regulator *lcd_supply; u32 pseudo_palette[16]; struct fb_videomode mode; struct lcd_ctrl_config cfg; @@ -1066,6 +1068,7 @@ static void lcd_da8xx_cpufreq_deregister(struct da8xx_fb_par *par) static int fb_remove(struct platform_device *dev) { struct fb_info *info = dev_get_drvdata(&dev->dev); + int ret; if (info) { struct da8xx_fb_par *par = info->par; @@ -1073,8 +1076,13 @@ static int fb_remove(struct platform_device *dev) #ifdef CONFIG_CPU_FREQ lcd_da8xx_cpufreq_deregister(par); #endif - if (par->panel_power_ctrl) + if (par->panel_power_ctrl) { par->panel_power_ctrl(0); + } else if (par->lcd_supply) { + ret = regulator_disable(par->lcd_supply); + if (ret) + return ret; + } lcd_disable_raster(DA8XX_FRAME_WAIT); lcdc_write(0, LCD_RASTER_CTRL_REG); @@ -1179,15 +1187,25 @@ static int cfb_blank(int blank, struct fb_info *info) case FB_BLANK_UNBLANK: lcd_enable_raster(); - if (par->panel_power_ctrl) + if (par->panel_power_ctrl) { par->panel_power_ctrl(1); + } else if (par->lcd_supply) { + ret = regulator_enable(par->lcd_supply); + if (ret) + return ret; + } break; case FB_BLANK_NORMAL: case FB_BLANK_VSYNC_SUSPEND: case FB_BLANK_HSYNC_SUSPEND: case FB_BLANK_POWERDOWN: - if (par->panel_power_ctrl) + if (par->panel_power_ctrl) { par->panel_power_ctrl(0); + } else if (par->lcd_supply) { + ret = regulator_disable(par->lcd_supply); + if (ret) + return ret; + } lcd_disable_raster(DA8XX_FRAME_WAIT); break; @@ -1401,6 +1419,20 @@ static int fb_probe(struct platform_device *device) par->panel_power_ctrl(1); } + par->lcd_supply = devm_regulator_get_optional(&device->dev, "lcd"); + if (IS_ERR(par->lcd_supply)) { + if (PTR_ERR(par->lcd_supply) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_pm_runtime_disable; + } + + par->lcd_supply = NULL; + } else { + ret = regulator_enable(par->lcd_supply); + if (ret) + goto err_pm_runtime_disable; + } + fb_videomode_to_var(&da8xx_fb_var, lcdc_info); par->cfg = *lcd_cfg; @@ -1604,10 +1636,16 @@ static int fb_suspend(struct device *dev) { struct fb_info *info = dev_get_drvdata(dev); struct da8xx_fb_par *par = info->par; + int ret; console_lock(); - if (par->panel_power_ctrl) + if (par->panel_power_ctrl) { par->panel_power_ctrl(0); + } else if (par->lcd_supply) { + ret = regulator_disable(par->lcd_supply); + if (ret) + return ret; + } fb_set_suspend(info, 1); lcd_disable_raster(DA8XX_FRAME_WAIT); @@ -1621,6 +1659,7 @@ static int fb_resume(struct device *dev) { struct fb_info *info = dev_get_drvdata(dev); struct da8xx_fb_par *par = info->par; + int ret; console_lock(); pm_runtime_get_sync(dev); @@ -1628,8 +1667,13 @@ static int fb_resume(struct device *dev) if (par->blank == FB_BLANK_UNBLANK) { lcd_enable_raster(); - if (par->panel_power_ctrl) + if (par->panel_power_ctrl) { par->panel_power_ctrl(1); + } else if (par->lcd_supply) { + ret = regulator_enable(par->lcd_supply); + if (ret) + return ret; + } } fb_set_suspend(info, 0); -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel