On Thu, Jun 20, 2019 at 7:14 PM Brian Masney <masneyb@xxxxxxxxxxxxx> wrote: > > On Wed, Jun 19, 2019 at 01:21:20PM -0700, Rob Clark wrote: > > On Wed, Jun 19, 2019 at 1:17 PM Rob Herring <robh+dt@xxxxxxxxxx> wrote: > > > > > > On Sun, Jun 16, 2019 at 7:29 AM Brian Masney <masneyb@xxxxxxxxxxxxx> wrote: > > > > > > > > Some A3xx and A4xx Adreno GPUs do not have GMEM inside the GPU core and > > > > must use the On Chip MEMory (OCMEM) in order to be functional. Add the > > > > optional ocmem property to the Adreno Graphics Management Unit bindings. > > > > > > > > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> > > > > --- > > > > Documentation/devicetree/bindings/display/msm/gmu.txt | 4 ++++ > > > > 1 file changed, 4 insertions(+) > > > > > > > > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt > > > > index 90af5b0a56a9..c746b95e95d4 100644 > > > > --- a/Documentation/devicetree/bindings/display/msm/gmu.txt > > > > +++ b/Documentation/devicetree/bindings/display/msm/gmu.txt > > > > @@ -31,6 +31,10 @@ Required properties: > > > > - iommus: phandle to the adreno iommu > > > > - operating-points-v2: phandle to the OPP operating points > > > > > > > > +Optional properties: > > > > +- ocmem: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon > > > > + SoCs. See Documentation/devicetree/bindings/soc/qcom/qcom,ocmem.yaml. > > > > > > We already have a couple of similar properties. Lets standardize on > > > 'sram' as that is what TI already uses. > > > > > > Also, is the whole OCMEM allocated to the GMU? If not you should have > > > child nodes to subdivide the memory. > > > > > > > iirc, downstream a large chunk of OCMEM is statically allocated for > > GPU.. the remainder is dynamically allocated for different use-cases. > > The upstream driver Brian is proposing only handles the static > > allocation case > > It appears that the GPU expects to use a specific region of ocmem, > specifically starting at 0. The freedreno driver allocates 1MB of > ocmem on the Nexus 5 starting at ocmem address 0. As a test, I > changed the starting address to 0.5MB and kmscube shows only half the > cube, and four wide black bars across the screen: > > https://www.flickr.com/photos/masneyb/48100534381/ > > > (and I don't think we have upstream support for the various audio and > > video use-cases that used dynamic OCMEM allocation downstream) > > That's my understanding as well. > > > Although maybe we should still have a child node to separate the > > statically and dynamically allocated parts? I'm not sure what would > > make the most sense.. > > Given that the GPU is expecting a fixed address in ocmem, perhaps it > makes sense to have the child node. How about this based on the > sram/sram.txt bindings? > > ocmem: ocmem@fdd00000 { > compatible = "qcom,msm8974-ocmem"; > > reg = <0xfdd00000 0x2000>, <0xfec00000 0x180000>; > reg-names = "ctrl", "mem"; > > clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, <&mmcc OCMEMCX_OCMEMNOC_CLK>; > clock-names = "core", "iface"; > > gmu-sram@0 { > reg = <0x0 0x100000>; > pool; > }; > > misc-sram@0 { > reg = <0x100000 0x080000>; > export; > }; > }; > > I marked the misc pool as export since I've seen in the downstream ocmem > sources a reference to their closed libsensors that runs in userspace. > > Looking at the sram bindings led me to the genalloc API > (Documentation/core-api/genalloc.rst). I wonder if this is the way that > this should be done? won't claim to be a dt expert, but this seems somewhat sane.. maybe drop the export until a use-case comes along for that.. or even the entire second child node? I guess that comes down to what robher and others prefer, I can't really speculate too much about the non-gpu use-cases for ocmem (or if they'll ever be upstream) BR, -R _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
