[PATCH v2 2/4] drm/lima: Reduce the amount of logs on deferred probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There is no point to print deferred probe (and its failures to get
resources) as an error.  For example getting a regulator causes three
unneeded error messages:

    lima 13000000.gpu: failed to get regulator: -517
    lima 13000000.gpu: regulator init fail -517
    lima 13000000.gpu: Fatal error during GPU init

Also do not print clock rates before the initialization finishes
because they will be duplicated after deferral.  Each probe step already
prints error so remove the final error message "Fatal error during GPU
init".

In case of multiple probe tries this would pollute the dmesg.

Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

---

Changes since v1:
1. None
---
 drivers/gpu/drm/lima/lima_device.c | 17 ++++++-----------
 drivers/gpu/drm/lima/lima_drv.c    |  4 +---
 2 files changed, 7 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/lima/lima_device.c b/drivers/gpu/drm/lima/lima_device.c
index 570d0e93f9a9..bb2eaa4f370e 100644
--- a/drivers/gpu/drm/lima/lima_device.c
+++ b/drivers/gpu/drm/lima/lima_device.c
@@ -80,7 +80,6 @@ const char *lima_ip_name(struct lima_ip *ip)
 static int lima_clk_init(struct lima_device *dev)
 {
 	int err;
-	unsigned long bus_rate, gpu_rate;
 
 	dev->clk_bus = devm_clk_get(dev->dev, "bus");
 	if (IS_ERR(dev->clk_bus)) {
@@ -94,12 +93,6 @@ static int lima_clk_init(struct lima_device *dev)
 		return PTR_ERR(dev->clk_gpu);
 	}
 
-	bus_rate = clk_get_rate(dev->clk_bus);
-	dev_info(dev->dev, "bus rate = %lu\n", bus_rate);
-
-	gpu_rate = clk_get_rate(dev->clk_gpu);
-	dev_info(dev->dev, "mod rate = %lu", gpu_rate);
-
 	err = clk_prepare_enable(dev->clk_bus);
 	if (err)
 		return err;
@@ -145,7 +138,8 @@ static int lima_regulator_init(struct lima_device *dev)
 		dev->regulator = NULL;
 		if (ret == -ENODEV)
 			return 0;
-		dev_err(dev->dev, "failed to get regulator: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev->dev, "failed to get regulator: %d\n", ret);
 		return ret;
 	}
 
@@ -297,10 +291,8 @@ int lima_device_init(struct lima_device *ldev)
 	}
 
 	err = lima_regulator_init(ldev);
-	if (err) {
-		dev_err(ldev->dev, "regulator init fail %d\n", err);
+	if (err)
 		goto err_out0;
-	}
 
 	ldev->empty_vm = lima_vm_create(ldev);
 	if (!ldev->empty_vm) {
@@ -343,6 +335,9 @@ int lima_device_init(struct lima_device *ldev)
 	if (err)
 		goto err_out5;
 
+	dev_info(ldev->dev, "bus rate = %lu\n", clk_get_rate(ldev->clk_bus));
+	dev_info(ldev->dev, "mod rate = %lu", clk_get_rate(ldev->clk_gpu));
+
 	return 0;
 
 err_out5:
diff --git a/drivers/gpu/drm/lima/lima_drv.c b/drivers/gpu/drm/lima/lima_drv.c
index b29c26cd13b2..cebc44592e47 100644
--- a/drivers/gpu/drm/lima/lima_drv.c
+++ b/drivers/gpu/drm/lima/lima_drv.c
@@ -307,10 +307,8 @@ static int lima_pdev_probe(struct platform_device *pdev)
 	ldev->ddev = ddev;
 
 	err = lima_device_init(ldev);
-	if (err) {
-		dev_err(&pdev->dev, "Fatal error during GPU init\n");
+	if (err)
 		goto err_out1;
-	}
 
 	/*
 	 * Register the DRM device with the core and the connectors with
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux