[PATCH v6 15/15] drm/bridge: tc358767: Add support for address-only I2C transfers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Transfer size of zero means a request to do an address-only
transfer. Since the HW support this, we probably shouldn't be just
ignoring such requests. While at it allow DP_AUX_I2C_MOT flag to pass
through, since it is supported by the HW as well.

Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Cc: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Cc: Andrey Gusakov <andrey.gusakov@xxxxxxxxxxxxxxxxxx>
Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Cc: Cory Tusar <cory.tusar@xxxxxxxx>
Cc: Chris Healy <cphealy@xxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
 drivers/gpu/drm/bridge/tc358767.c | 42 +++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 3f8a15390813..7b8e19d6cf29 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -145,6 +145,8 @@
 
 /* AUX channel */
 #define DP0_AUXCFG0		0x0660
+#define DP0_AUXCFG0_BSIZE	GENMASK(11, 8)
+#define DP0_AUXCFG0_ADDR_ONLY	BIT(4)
 #define DP0_AUXCFG1		0x0664
 #define AUX_RX_FILTER_EN		BIT(16)
 
@@ -326,6 +328,18 @@ static int tc_aux_read_data(struct tc_data *tc, void *data, size_t size)
 	return size;
 }
 
+static u32 tc_auxcfg0(struct drm_dp_aux_msg *msg, size_t size)
+{
+	u32 auxcfg0 = msg->request;
+
+	if (size)
+		auxcfg0 |= FIELD_PREP(DP0_AUXCFG0_BSIZE, size - 1);
+	else
+		auxcfg0 |= DP0_AUXCFG0_ADDR_ONLY;
+
+	return auxcfg0;
+}
+
 static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 			       struct drm_dp_aux_msg *msg)
 {
@@ -335,9 +349,6 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	u32 auxstatus;
 	int ret;
 
-	if (size == 0)
-		return 0;
-
 	ret = tc_aux_wait_busy(tc);
 	if (ret)
 		return ret;
@@ -348,9 +359,11 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 		break;
 	case DP_AUX_NATIVE_WRITE:
 	case DP_AUX_I2C_WRITE:
-		ret = tc_aux_write_data(tc, msg->buffer, size);
-		if (ret < 0)
-			return ret;
+		if (size) {
+			ret = tc_aux_write_data(tc, msg->buffer, size);
+			if (ret < 0)
+				return ret;
+		}
 		break;
 	default:
 		return -EINVAL;
@@ -361,8 +374,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 	if (ret)
 		return ret;
 	/* Start transfer */
-	ret = regmap_write(tc->regmap, DP0_AUXCFG0,
-			   ((size - 1) << 8) | request);
+	ret = regmap_write(tc->regmap, DP0_AUXCFG0, tc_auxcfg0(msg, size));
 	if (ret)
 		return ret;
 
@@ -376,14 +388,22 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 
 	if (auxstatus & AUX_TIMEOUT)
 		return -ETIMEDOUT;
-
-	size = FIELD_GET(AUX_BYTES, auxstatus);
+	/*
+	 * For some reason address-only DP_AUX_I2C_WRITE (MOT), still
+	 * reports 1 byte transferred in its status. To deal we that
+	 * we ignore aux_bytes field if we know that this was an
+	 * address-only transfer
+	 */
+	if (size)
+		size = FIELD_GET(AUX_BYTES, auxstatus);
 	msg->reply = FIELD_GET(AUX_STATUS, auxstatus);
 
 	switch (request) {
 	case DP_AUX_NATIVE_READ:
 	case DP_AUX_I2C_READ:
-		return tc_aux_read_data(tc, msg->buffer, size);
+		if (size)
+			return tc_aux_read_data(tc, msg->buffer, size);
+		break;
 	}
 
 	return size;
-- 
2.21.0

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux