Re: [PATCH 2/3] drm/rockchip: Add optional support for CRTC gamma LUT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Mittwoch, 19. Juni 2019, 00:09:57 CEST schrieb Ezequiel Garcia:
> On Tue, 2019-06-18 at 17:47 -0400, Ilia Mirkin wrote:
> > On Tue, Jun 18, 2019 at 5:43 PM Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx> wrote:
> > > Add an optional CRTC gamma LUT support, and enable it on RK3288.
> > > This is currently enabled via a separate address resource,
> > > which needs to be specified in the devicetree.
> > > 
> > > The address resource is required because on some SoCs, such as
> > > RK3288, the LUT address is after the MMU address, and the latter
> > > is supported by a different driver. This prevents the DRM driver
> > > from requesting an entire register space.
> > > 
> > > The current implementation works for RGB 10-bit tables, as that
> > > is what seems to work on RK3288.
> > > 
> > > Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
> > > ---
> > > Changes from RFC:
> > > * Request (an optional) address resource for the LUT.
> > > * Drop support for RK3399, which doesn't seem to work
> > >   out of the box and needs more research.
> > > * Support pass-thru setting when GAMMA_LUT is NULL.
> > > * Add a check for the gamma size, as suggested by Ilia.
> > > * Move gamma setting to atomic_commit_tail, as pointed
> > >   out by Jacopo/Laurent, is the correct way.
> > > ---
> > > diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> > > index 12ed5265a90b..5b6edbe2673f 100644
> > > --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> > > +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> > > +static void vop_crtc_gamma_set(struct vop *vop, struct drm_crtc *crtc,
> > > +                              struct drm_crtc_state *old_state)
> > > +{
> > > +       int idle, ret, i;
> > > +
> > > +       spin_lock(&vop->reg_lock);
> > > +       VOP_REG_SET(vop, common, dsp_lut_en, 0);
> > > +       vop_cfg_done(vop);
> > > +       spin_unlock(&vop->reg_lock);
> > > +
> > > +       ret = readx_poll_timeout(vop_dsp_lut_is_enable, vop,
> > > +                          idle, !idle, 5, 30 * 1000);
> > > +       if (ret)
> > > +               return;
> > > +
> > > +       spin_lock(&vop->reg_lock);
> > > +
> > > +       if (crtc->state->gamma_lut) {
> > > +               if (!old_state->gamma_lut || (crtc->state->gamma_lut->base.id !=
> > > +                                             old_state->gamma_lut->base.id))
> > > +                       vop_crtc_write_gamma_lut(vop, crtc);
> > > +       } else {
> > > +               for (i = 0; i < crtc->gamma_size; i++) {
> > > +                       u32 word;
> > > +
> > > +                       word = (i << 20) | (i << 10) | i;
> > > +                       writel(word, vop->lut_regs + i * 4);
> > > +               }
> > 
> > Note - I'm not in any way familiar with the hardware, so take with a
> > grain of salt --
> > 
> > Could you just leave dsp_lut_en turned off in this case?
> > 
> 
> That was the first thing I tried :-)
> 
> It seems dsp_lut_en is not to enable the CRTC gamma LUT stage,
> but to enable writing the gamma LUT to the internal RAM.

I guess that warants a code comment stating this, so we don't end
up with well-meant cleanup patches in the future :-) .


> 
> And the specs list no register to enable/disable the gamma LUT.
> 
> Thanks!
> Eze
> 
> 




_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux