Dne sreda, 12. junij 2019 ob 10:51:47 CEST je Neil Armstrong napisal(a): > When using an I2S source using a different clock source (usually the I2S > audio HW uses dedicated PLLs, different from the HDMI PHY PLL), fixed > CTS values will cause some frequent audio drop-out and glitches as > reported on Amlogic, Allwinner and Rockchip SoCs setups. > > Setting the CTS in automatic mode will let the HDMI controller generate > automatically the CTS value to match the input audio clock. > > The DesignWare DW-HDMI User Guide explains: > For Automatic CTS generation > Write "0" on the bit field "CTS_manual", Register 0x3205: AUD_CTS3 > > The DesignWare DW-HDMI Databook explains : > If "CTS_manual" bit equals 0b this registers contains "audCTS[19:0]" > generated by the Cycle time counter according to specified timing. > > Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxx> > Cc: Maxime Ripard <maxime.ripard@xxxxxxxxxxx> > Cc: Jonas Karlman <jonas@xxxxxxxxx> > Cc: Heiko Stuebner <heiko@xxxxxxxxx> > Cc: Jerome Brunet <jbrunet@xxxxxxxxxxxx> > Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> Tested-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx> Reviewed-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx> Best regards, Jernej _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
