Store the audio port enable register in the audio settings structure, which can never be zero for a valid audio configuration. Use this to signal whether we have audio configured, rather than AFMT_UNUSED. Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i2c/tda998x_drv.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index 9b3e47f408ca..9590c4f92969 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -42,6 +42,7 @@ struct tda998x_audio_port { struct tda998x_audio_settings { struct tda998x_audio_params params; + u8 ena_ap; u8 i2s_format; u8 cts_n; }; @@ -961,10 +962,14 @@ static int tda998x_configure_audio(struct tda998x_priv *priv, u8 buf[6], clksel_aip, clksel_fs, adiv; u32 n; + /* If audio is not configured, there is nothing to do. */ + if (settings->ena_ap == 0) + return 0; + adiv = tda998x_get_adiv(priv, settings->params.sample_rate); /* Enable audio ports */ - reg_write(priv, REG_ENA_AP, settings->params.config); + reg_write(priv, REG_ENA_AP, settings->ena_ap); /* Set audio input source */ switch (settings->params.format) { @@ -1074,9 +1079,9 @@ static int tda998x_audio_hw_params(struct device *dev, void *data, for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++) if (priv->audio_port[i].format == audio.params.format) - audio.params.config = priv->audio_port[i].config; + audio.ena_ap = priv->audio_port[i].config; - if (audio.params.config == 0) { + if (audio.ena_ap == 0) { dev_err(dev, "%s: No audio configuration found\n", __func__); return -EINVAL; } @@ -1116,8 +1121,7 @@ static void tda998x_audio_shutdown(struct device *dev, void *data) mutex_lock(&priv->audio_mutex); reg_write(priv, REG_ENA_AP, 0); - - priv->audio.params.format = AFMT_UNUSED; + priv->audio.ena_ap = 0; mutex_unlock(&priv->audio_mutex); } @@ -1623,8 +1627,7 @@ static void tda998x_bridge_mode_set(struct drm_bridge *bridge, tda998x_write_avi(priv, adjusted_mode); - if (priv->audio.params.format != AFMT_UNUSED && - priv->sink_has_audio) + if (priv->sink_has_audio) tda998x_configure_audio(priv, &priv->audio); } @@ -1705,6 +1708,7 @@ static int tda998x_set_config(struct tda998x_priv *priv, bool spdif = p->audio_params.format == AFMT_SPDIF; priv->audio.params = p->audio_params; + priv->audio.ena_ap = p->audio_params.config; priv->audio.i2s_format = I2S_FORMAT_PHILIPS; ratio = spdif ? 64 : p->audio_params.sample_width * 2; -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel