Rather than searching an array for the audio format (which we control) implement indexing by route type. This avoids iterating over the array in several locations. Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i2c/tda998x_drv.c | 57 ++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index 9590c4f92969..91b8ad1da923 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -35,9 +35,10 @@ #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) -struct tda998x_audio_port { - u8 format; /* AFMT_xxx */ - u8 config; /* AP value */ +enum { + AUDIO_ROUTE_I2S, + AUDIO_ROUTE_SPDIF, + AUDIO_ROUTE_NUM }; struct tda998x_audio_settings { @@ -79,7 +80,7 @@ struct tda998x_priv { struct drm_bridge bridge; struct drm_connector connector; - struct tda998x_audio_port audio_port[2]; + u8 audio_port_enable[AUDIO_ROUTE_NUM]; struct tda9950_glue cec_glue; struct gpio_desc *calib; struct cec_notifier *cec_notify; @@ -1045,7 +1046,7 @@ static int tda998x_audio_hw_params(struct device *dev, void *data, struct tda998x_priv *priv = dev_get_drvdata(dev); unsigned int bclk_ratio; bool spdif = daifmt->fmt == HDMI_SPDIF; - int i, ret; + int ret; struct tda998x_audio_settings audio = { .params = { .sample_width = params->sample_width, @@ -1077,10 +1078,7 @@ static int tda998x_audio_hw_params(struct device *dev, void *data, audio.params.format = spdif ? AFMT_SPDIF : AFMT_I2S; - for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++) - if (priv->audio_port[i].format == audio.params.format) - audio.ena_ap = priv->audio_port[i].config; - + audio.ena_ap = priv->audio_port_enable[AUDIO_ROUTE_I2S + spdif]; if (audio.ena_ap == 0) { dev_err(dev, "%s: No audio configuration found\n", __func__); return -EINVAL; @@ -1165,16 +1163,11 @@ static int tda998x_audio_codec_init(struct tda998x_priv *priv, .ops = &audio_codec_ops, .max_i2s_channels = 2, }; - int i; - for (i = 0; i < ARRAY_SIZE(priv->audio_port); i++) { - if (priv->audio_port[i].format == AFMT_I2S && - priv->audio_port[i].config != 0) - codec_data.i2s = 1; - if (priv->audio_port[i].format == AFMT_SPDIF && - priv->audio_port[i].config != 0) - codec_data.spdif = 1; - } + if (priv->audio_port_enable[AUDIO_ROUTE_I2S]) + codec_data.i2s = 1; + if (priv->audio_port_enable[AUDIO_ROUTE_SPDIF]) + codec_data.spdif = 1; priv->audio_pdev = platform_device_register_data( dev, HDMI_CODEC_DRV_NAME, PLATFORM_DEVID_AUTO, @@ -1657,7 +1650,7 @@ static int tda998x_get_audio_ports(struct tda998x_priv *priv, return 0; size /= sizeof(u32); - if (size > 2 * ARRAY_SIZE(priv->audio_port) || size % 2 != 0) { + if (size > 2 * ARRAY_SIZE(priv->audio_port_enable) || size % 2 != 0) { dev_err(&priv->hdmi->dev, "Bad number of elements in audio-ports dt-property\n"); return -EINVAL; @@ -1666,23 +1659,30 @@ static int tda998x_get_audio_ports(struct tda998x_priv *priv, size /= 2; for (i = 0; i < size; i++) { + unsigned int route; u8 afmt = be32_to_cpup(&port_data[2*i]); u8 ena_ap = be32_to_cpup(&port_data[2*i+1]); - if (afmt != AFMT_SPDIF && afmt != AFMT_I2S) { + switch (afmt) { + case AFMT_I2S: + route = AUDIO_ROUTE_I2S; + break; + case AFMT_SPDIF: + route = AUDIO_ROUTE_SPDIF; + break; + default: dev_err(&priv->hdmi->dev, "Bad audio format %u\n", afmt); return -EINVAL; } - priv->audio_port[i].format = afmt; - priv->audio_port[i].config = ena_ap; - } + if (priv->audio_port_enable[route]) { + dev_err(&priv->hdmi->dev, + "There can only be on I2S port and one SPDIF port\n"); + return -EINVAL; + } - if (priv->audio_port[0].format == priv->audio_port[1].format) { - dev_err(&priv->hdmi->dev, - "There can only be on I2S port and one SPDIF port\n"); - return -EINVAL; + priv->audio_port_enable[route] = ena_ap; } return 0; } @@ -1914,7 +1914,8 @@ static int tda998x_create(struct device *dev) if (ret) goto fail; - if (priv->audio_port[0].format != AFMT_UNUSED) + if (priv->audio_port_enable[AUDIO_ROUTE_I2S] || + priv->audio_port_enable[AUDIO_ROUTE_SPDIF]) tda998x_audio_codec_init(priv, &client->dev); } else if (dev->platform_data) { ret = tda998x_set_config(priv, dev->platform_data); -- 2.7.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel