Re: [PATCH v4 18/28] docs: convert docs to ReST and rename to *.rst

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 12, 2019 at 02:52:54PM -0300, Mauro Carvalho Chehab wrote:
> Convert the PM documents to ReST, in order to allow them to
> build with Sphinx.
> 
> The conversion is actually:
>   - add blank lines and identation in order to identify paragraphs;
>   - fix tables markups;
>   - add some lists markups;
>   - mark literal blocks;
>   - adjust title markups.
> 
> At its new index.rst, let's add a :orphan: while this is not linked to
> the main index.rst file, in order to avoid build warnings.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
> Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Acked-by: Mark Brown <broonie@xxxxxxxxxx>
> ---
>  .../ABI/testing/sysfs-class-powercap          |   2 +-
>  .../admin-guide/kernel-parameters.txt         |   6 +-
>  Documentation/cpu-freq/core.txt               |   2 +-
>  Documentation/driver-api/pm/devices.rst       |   6 +-
>  .../driver-api/usb/power-management.rst       |   2 +-
>  .../power/{apm-acpi.txt => apm-acpi.rst}      |  10 +-
>  ...m-debugging.txt => basic-pm-debugging.rst} |  79 +--
>  ...harger-manager.txt => charger-manager.rst} | 101 ++--
>  ...rivers-testing.txt => drivers-testing.rst} |  15 +-
>  .../{energy-model.txt => energy-model.rst}    | 101 ++--
>  ...ing-of-tasks.txt => freezing-of-tasks.rst} |  91 ++--
>  Documentation/power/index.rst                 |  46 ++
>  .../power/{interface.txt => interface.rst}    |  24 +-
>  Documentation/power/{opp.txt => opp.rst}      | 175 +++---
>  Documentation/power/{pci.txt => pci.rst}      |  87 ++-
>  ...qos_interface.txt => pm_qos_interface.rst} | 127 +++--
>  Documentation/power/power_supply_class.rst    | 282 ++++++++++
>  Documentation/power/power_supply_class.txt    | 231 --------
>  Documentation/power/powercap/powercap.rst     | 257 +++++++++
>  Documentation/power/powercap/powercap.txt     | 236 ---------
>  .../regulator/{consumer.txt => consumer.rst}  | 141 ++---
>  .../regulator/{design.txt => design.rst}      |   9 +-
>  .../regulator/{machine.txt => machine.rst}    |  47 +-
>  .../regulator/{overview.txt => overview.rst}  |  57 +-
>  Documentation/power/regulator/regulator.rst   |  32 ++
>  Documentation/power/regulator/regulator.txt   |  30 --
>  .../power/{runtime_pm.txt => runtime_pm.rst}  | 234 ++++----
>  Documentation/power/{s2ram.txt => s2ram.rst}  |  20 +-
>  ...hotplug.txt => suspend-and-cpuhotplug.rst} |  42 +-
>  ...errupts.txt => suspend-and-interrupts.rst} |   2 +
>  ...ap-files.txt => swsusp-and-swap-files.rst} |  17 +-
>  ...{swsusp-dmcrypt.txt => swsusp-dmcrypt.rst} | 120 ++---
>  Documentation/power/swsusp.rst                | 501 ++++++++++++++++++
>  Documentation/power/swsusp.txt                | 446 ----------------
>  .../power/{tricks.txt => tricks.rst}          |   6 +-
>  ...serland-swsusp.txt => userland-swsusp.rst} |  55 +-
>  Documentation/power/{video.txt => video.rst}  | 156 +++---
>  Documentation/process/submitting-drivers.rst  |   2 +-
>  Documentation/scheduler/sched-energy.txt      |   6 +-
>  Documentation/trace/coresight-cpu-debug.txt   |   2 +-

For the coresight-debug part:

Reviewed-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>

>  .../zh_CN/process/submitting-drivers.rst      |   2 +-
>  MAINTAINERS                                   |   4 +-
>  arch/x86/Kconfig                              |   2 +-
>  drivers/gpu/drm/i915/i915_drv.h               |   2 +-
>  drivers/opp/Kconfig                           |   2 +-
>  drivers/power/supply/power_supply_core.c      |   2 +-
>  include/linux/interrupt.h                     |   2 +-
>  include/linux/pci.h                           |   2 +-
>  include/linux/pm.h                            |   2 +-
>  kernel/power/Kconfig                          |   6 +-
>  net/wireless/Kconfig                          |   2 +-
>  51 files changed, 2126 insertions(+), 1707 deletions(-)
>  rename Documentation/power/{apm-acpi.txt => apm-acpi.rst} (87%)
>  rename Documentation/power/{basic-pm-debugging.txt => basic-pm-debugging.rst} (87%)
>  rename Documentation/power/{charger-manager.txt => charger-manager.rst} (78%)
>  rename Documentation/power/{drivers-testing.txt => drivers-testing.rst} (86%)
>  rename Documentation/power/{energy-model.txt => energy-model.rst} (74%)
>  rename Documentation/power/{freezing-of-tasks.txt => freezing-of-tasks.rst} (75%)
>  create mode 100644 Documentation/power/index.rst
>  rename Documentation/power/{interface.txt => interface.rst} (84%)
>  rename Documentation/power/{opp.txt => opp.rst} (78%)
>  rename Documentation/power/{pci.txt => pci.rst} (97%)
>  rename Documentation/power/{pm_qos_interface.txt => pm_qos_interface.rst} (62%)
>  create mode 100644 Documentation/power/power_supply_class.rst
>  delete mode 100644 Documentation/power/power_supply_class.txt
>  create mode 100644 Documentation/power/powercap/powercap.rst
>  delete mode 100644 Documentation/power/powercap/powercap.txt
>  rename Documentation/power/regulator/{consumer.txt => consumer.rst} (61%)
>  rename Documentation/power/regulator/{design.txt => design.rst} (86%)
>  rename Documentation/power/regulator/{machine.txt => machine.rst} (75%)
>  rename Documentation/power/regulator/{overview.txt => overview.rst} (79%)
>  create mode 100644 Documentation/power/regulator/regulator.rst
>  delete mode 100644 Documentation/power/regulator/regulator.txt
>  rename Documentation/power/{runtime_pm.txt => runtime_pm.rst} (89%)
>  rename Documentation/power/{s2ram.txt => s2ram.rst} (92%)
>  rename Documentation/power/{suspend-and-cpuhotplug.txt => suspend-and-cpuhotplug.rst} (90%)
>  rename Documentation/power/{suspend-and-interrupts.txt => suspend-and-interrupts.rst} (98%)
>  rename Documentation/power/{swsusp-and-swap-files.txt => swsusp-and-swap-files.rst} (83%)
>  rename Documentation/power/{swsusp-dmcrypt.txt => swsusp-dmcrypt.rst} (67%)
>  create mode 100644 Documentation/power/swsusp.rst
>  delete mode 100644 Documentation/power/swsusp.txt
>  rename Documentation/power/{tricks.txt => tricks.rst} (93%)
>  rename Documentation/power/{userland-swsusp.txt => userland-swsusp.rst} (85%)
>  rename Documentation/power/{video.txt => video.rst} (56%)
> 
> diff --git a/Documentation/ABI/testing/sysfs-class-powercap b/Documentation/ABI/testing/sysfs-class-powercap
> index db3b3ff70d84..742dfd966592 100644
> --- a/Documentation/ABI/testing/sysfs-class-powercap
> +++ b/Documentation/ABI/testing/sysfs-class-powercap
> @@ -5,7 +5,7 @@ Contact:	linux-pm@xxxxxxxxxxxxxxx
>  Description:
>  		The powercap/ class sub directory belongs to the power cap
>  		subsystem. Refer to
> -		Documentation/power/powercap/powercap.txt for details.
> +		Documentation/power/powercap/powercap.rst for details.
>  
>  What:		/sys/class/powercap/<control type>
>  Date:		September 2013
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index c31373f39240..0092a453f7dc 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -13,7 +13,7 @@
>  			For ARM64, ONLY "acpi=off", "acpi=on" or "acpi=force"
>  			are available
>  
> -			See also Documentation/power/runtime_pm.txt, pci=noacpi
> +			See also Documentation/power/runtime_pm.rst, pci=noacpi
>  
>  	acpi_apic_instance=	[ACPI, IOAPIC]
>  			Format: <int>
> @@ -223,7 +223,7 @@
>  	acpi_sleep=	[HW,ACPI] Sleep options
>  			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
>  				  old_ordering, nonvs, sci_force_enable, nobl }
> -			See Documentation/power/video.txt for information on
> +			See Documentation/power/video.rst for information on
>  			s3_bios and s3_mode.
>  			s3_beep is for debugging; it makes the PC's speaker beep
>  			as soon as the kernel's real-mode entry point is called.
> @@ -4128,7 +4128,7 @@
>  			Specify the offset from the beginning of the partition
>  			given by "resume=" at which the swap header is located,
>  			in <PAGE_SIZE> units (needed only for swap files).
> -			See  Documentation/power/swsusp-and-swap-files.txt
> +			See  Documentation/power/swsusp-and-swap-files.rst
>  
>  	resumedelay=	[HIBERNATION] Delay (in seconds) to pause before attempting to
>  			read the resume files
> diff --git a/Documentation/cpu-freq/core.txt b/Documentation/cpu-freq/core.txt
> index 073f128af5a7..55193e680250 100644
> --- a/Documentation/cpu-freq/core.txt
> +++ b/Documentation/cpu-freq/core.txt
> @@ -95,7 +95,7 @@ flags	- flags of the cpufreq driver
>  
>  3. CPUFreq Table Generation with Operating Performance Point (OPP)
>  ==================================================================
> -For details about OPP, see Documentation/power/opp.txt
> +For details about OPP, see Documentation/power/opp.rst
>  
>  dev_pm_opp_init_cpufreq_table -
>  	This function provides a ready to use conversion routine to translate
> diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst
> index 30835683616a..f66c7b9126ea 100644
> --- a/Documentation/driver-api/pm/devices.rst
> +++ b/Documentation/driver-api/pm/devices.rst
> @@ -225,7 +225,7 @@ system-wide transition to a sleep state even though its :c:member:`runtime_auto`
>  flag is clear.
>  
>  For more information about the runtime power management framework, refer to
> -:file:`Documentation/power/runtime_pm.txt`.
> +:file:`Documentation/power/runtime_pm.rst`.
>  
>  
>  Calling Drivers to Enter and Leave System Sleep States
> @@ -728,7 +728,7 @@ it into account in any way.
>  
>  Devices may be defined as IRQ-safe which indicates to the PM core that their
>  runtime PM callbacks may be invoked with disabled interrupts (see
> -:file:`Documentation/power/runtime_pm.txt` for more information).  If an
> +:file:`Documentation/power/runtime_pm.rst` for more information).  If an
>  IRQ-safe device belongs to a PM domain, the runtime PM of the domain will be
>  disallowed, unless the domain itself is defined as IRQ-safe. However, it
>  makes sense to define a PM domain as IRQ-safe only if all the devices in it
> @@ -795,7 +795,7 @@ so on) and the final state of the device must reflect the "active" runtime PM
>  status in that case.
>  
>  During system-wide resume from a sleep state it's easiest to put devices into
> -the full-power state, as explained in :file:`Documentation/power/runtime_pm.txt`.
> +the full-power state, as explained in :file:`Documentation/power/runtime_pm.rst`.
>  [Refer to that document for more information regarding this particular issue as
>  well as for information on the device runtime power management framework in
>  general.]
> diff --git a/Documentation/driver-api/usb/power-management.rst b/Documentation/driver-api/usb/power-management.rst
> index 4a74cf6f2797..2525c3622cae 100644
> --- a/Documentation/driver-api/usb/power-management.rst
> +++ b/Documentation/driver-api/usb/power-management.rst
> @@ -46,7 +46,7 @@ device is turned off while the system as a whole remains running, we
>  call it a "dynamic suspend" (also known as a "runtime suspend" or
>  "selective suspend").  This document concentrates mostly on how
>  dynamic PM is implemented in the USB subsystem, although system PM is
> -covered to some extent (see ``Documentation/power/*.txt`` for more
> +covered to some extent (see ``Documentation/power/*.rst`` for more
>  information about system PM).
>  
>  System PM support is present only if the kernel was built with
> diff --git a/Documentation/power/apm-acpi.txt b/Documentation/power/apm-acpi.rst
> similarity index 87%
> rename from Documentation/power/apm-acpi.txt
> rename to Documentation/power/apm-acpi.rst
> index 6cc423d3662e..5b90d947126d 100644
> --- a/Documentation/power/apm-acpi.txt
> +++ b/Documentation/power/apm-acpi.rst
> @@ -1,5 +1,7 @@
> +============
>  APM or ACPI?
> -------------
> +============
> +
>  If you have a relatively recent x86 mobile, desktop, or server system,
>  odds are it supports either Advanced Power Management (APM) or
>  Advanced Configuration and Power Interface (ACPI).  ACPI is the newer
> @@ -28,5 +30,7 @@ and be sure that they are started sometime in the system boot process.
>  Go ahead and start both.  If ACPI or APM is not available on your
>  system the associated daemon will exit gracefully.
>  
> -  apmd:   http://ftp.debian.org/pool/main/a/apmd/
> -  acpid:  http://acpid.sf.net/
> +  =====  =======================================
> +  apmd   http://ftp.debian.org/pool/main/a/apmd/
> +  acpid  http://acpid.sf.net/
> +  =====  =======================================
> diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.rst
> similarity index 87%
> rename from Documentation/power/basic-pm-debugging.txt
> rename to Documentation/power/basic-pm-debugging.rst
> index 708f87f78a75..69862e759c30 100644
> --- a/Documentation/power/basic-pm-debugging.txt
> +++ b/Documentation/power/basic-pm-debugging.rst
> @@ -1,12 +1,16 @@
> +=================================
>  Debugging hibernation and suspend
> +=================================
> +
>  	(C) 2007 Rafael J. Wysocki <rjw@xxxxxxx>, GPL
>  
>  1. Testing hibernation (aka suspend to disk or STD)
> +===================================================
>  
> -To check if hibernation works, you can try to hibernate in the "reboot" mode:
> +To check if hibernation works, you can try to hibernate in the "reboot" mode::
>  
> -# echo reboot > /sys/power/disk
> -# echo disk > /sys/power/state
> +	# echo reboot > /sys/power/disk
> +	# echo disk > /sys/power/state
>  
>  and the system should create a hibernation image, reboot, resume and get back to
>  the command prompt where you have started the transition.  If that happens,
> @@ -15,20 +19,21 @@ test at least a couple of times in a row for confidence.  [This is necessary,
>  because some problems only show up on a second attempt at suspending and
>  resuming the system.]  Moreover, hibernating in the "reboot" and "shutdown"
>  modes causes the PM core to skip some platform-related callbacks which on ACPI
> -systems might be necessary to make hibernation work.  Thus, if your machine fails
> -to hibernate or resume in the "reboot" mode, you should try the "platform" mode:
> +systems might be necessary to make hibernation work.  Thus, if your machine
> +fails to hibernate or resume in the "reboot" mode, you should try the
> +"platform" mode::
>  
> -# echo platform > /sys/power/disk
> -# echo disk > /sys/power/state
> +	# echo platform > /sys/power/disk
> +	# echo disk > /sys/power/state
>  
>  which is the default and recommended mode of hibernation.
>  
>  Unfortunately, the "platform" mode of hibernation does not work on some systems
>  with broken BIOSes.  In such cases the "shutdown" mode of hibernation might
> -work:
> +work::
>  
> -# echo shutdown > /sys/power/disk
> -# echo disk > /sys/power/state
> +	# echo shutdown > /sys/power/disk
> +	# echo disk > /sys/power/state
>  
>  (it is similar to the "reboot" mode, but it requires you to press the power
>  button to make the system resume).
> @@ -37,6 +42,7 @@ If neither "platform" nor "shutdown" hibernation mode works, you will need to
>  identify what goes wrong.
>  
>  a) Test modes of hibernation
> +----------------------------
>  
>  To find out why hibernation fails on your system, you can use a special testing
>  facility available if the kernel is compiled with CONFIG_PM_DEBUG set.  Then,
> @@ -44,36 +50,38 @@ there is the file /sys/power/pm_test that can be used to make the hibernation
>  core run in a test mode.  There are 5 test modes available:
>  
>  freezer
> -- test the freezing of processes
> +	- test the freezing of processes
>  
>  devices
> -- test the freezing of processes and suspending of devices
> +	- test the freezing of processes and suspending of devices
>  
>  platform
> -- test the freezing of processes, suspending of devices and platform
> -  global control methods(*)
> +	- test the freezing of processes, suspending of devices and platform
> +	  global control methods [1]_
>  
>  processors
> -- test the freezing of processes, suspending of devices, platform
> -  global control methods(*) and the disabling of nonboot CPUs
> +	- test the freezing of processes, suspending of devices, platform
> +	  global control methods [1]_ and the disabling of nonboot CPUs
>  
>  core
> -- test the freezing of processes, suspending of devices, platform global
> -  control methods(*), the disabling of nonboot CPUs and suspending of
> -  platform/system devices
> +	- test the freezing of processes, suspending of devices, platform global
> +	  control methods\ [1]_, the disabling of nonboot CPUs and suspending
> +	  of platform/system devices
>  
> -(*) the platform global control methods are only available on ACPI systems
> +.. [1]
> +
> +    the platform global control methods are only available on ACPI systems
>      and are only tested if the hibernation mode is set to "platform"
>  
>  To use one of them it is necessary to write the corresponding string to
>  /sys/power/pm_test (eg. "devices" to test the freezing of processes and
>  suspending devices) and issue the standard hibernation commands.  For example,
>  to use the "devices" test mode along with the "platform" mode of hibernation,
> -you should do the following:
> +you should do the following::
>  
> -# echo devices > /sys/power/pm_test
> -# echo platform > /sys/power/disk
> -# echo disk > /sys/power/state
> +	# echo devices > /sys/power/pm_test
> +	# echo platform > /sys/power/disk
> +	# echo disk > /sys/power/state
>  
>  Then, the kernel will try to freeze processes, suspend devices, wait a few
>  seconds (5 by default, but configurable by the suspend.pm_test_delay module
> @@ -108,11 +116,12 @@ If the "devices" test fails, most likely there is a driver that cannot suspend
>  or resume its device (in the latter case the system may hang or become unstable
>  after the test, so please take that into consideration).  To find this driver,
>  you can carry out a binary search according to the rules:
> +
>  - if the test fails, unload a half of the drivers currently loaded and repeat
> -(that would probably involve rebooting the system, so always note what drivers
> -have been loaded before the test),
> +  (that would probably involve rebooting the system, so always note what drivers
> +  have been loaded before the test),
>  - if the test succeeds, load a half of the drivers you have unloaded most
> -recently and repeat.
> +  recently and repeat.
>  
>  Once you have found the failing driver (there can be more than just one of
>  them), you have to unload it every time before hibernation.  In that case please
> @@ -146,6 +155,7 @@ indicates a serious problem that very well may be related to the hardware, but
>  please report it anyway.
>  
>  b) Testing minimal configuration
> +--------------------------------
>  
>  If all of the hibernation test modes work, you can boot the system with the
>  "init=/bin/bash" command line parameter and attempt to hibernate in the
> @@ -165,14 +175,15 @@ Again, if you find the offending module(s), it(they) must be unloaded every time
>  before hibernation, and please report the problem with it(them).
>  
>  c) Using the "test_resume" hibernation option
> +---------------------------------------------
>  
>  /sys/power/disk generally tells the kernel what to do after creating a
>  hibernation image.  One of the available options is "test_resume" which
>  causes the just created image to be used for immediate restoration.  Namely,
> -after doing:
> +after doing::
>  
> -# echo test_resume > /sys/power/disk
> -# echo disk > /sys/power/state
> +	# echo test_resume > /sys/power/disk
> +	# echo disk > /sys/power/state
>  
>  a hibernation image will be created and a resume from it will be triggered
>  immediately without involving the platform firmware in any way.
> @@ -190,6 +201,7 @@ to resume may be related to the differences between the restore and image
>  kernels.
>  
>  d) Advanced debugging
> +---------------------
>  
>  In case that hibernation does not work on your system even in the minimal
>  configuration and compiling more drivers as modules is not practical or some
> @@ -200,9 +212,10 @@ kernel messages using the serial console.  This may provide you with some
>  information about the reasons of the suspend (resume) failure.  Alternatively,
>  it may be possible to use a FireWire port for debugging with firescope
>  (http://v3.sk/~lkundrak/firescope/).  On x86 it is also possible to
> -use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt .
> +use the PM_TRACE mechanism documented in Documentation/power/s2ram.rst .
>  
>  2. Testing suspend to RAM (STR)
> +===============================
>  
>  To verify that the STR works, it is generally more convenient to use the s2ram
>  tool available from http://suspend.sf.net and documented at
> @@ -230,7 +243,8 @@ you will have to unload them every time before an STR transition (ie. before
>  you run s2ram), and please report the problems with them.
>  
>  There is a debugfs entry which shows the suspend to RAM statistics. Here is an
> -example of its output.
> +example of its output::
> +
>  	# mount -t debugfs none /sys/kernel/debug
>  	# cat /sys/kernel/debug/suspend_stats
>  	success: 20
> @@ -248,6 +262,7 @@ example of its output.
>  				-16
>  	  last_failed_step:	suspend
>  				suspend
> +
>  Field success means the success number of suspend to RAM, and field fail means
>  the failure number. Others are the failure number of different steps of suspend
>  to RAM. suspend_stats just lists the last 2 failed devices, error number and
> diff --git a/Documentation/power/charger-manager.txt b/Documentation/power/charger-manager.rst
> similarity index 78%
> rename from Documentation/power/charger-manager.txt
> rename to Documentation/power/charger-manager.rst
> index 9ff1105e58d6..84fab9376792 100644
> --- a/Documentation/power/charger-manager.txt
> +++ b/Documentation/power/charger-manager.rst
> @@ -1,4 +1,7 @@
> +===============
>  Charger Manager
> +===============
> +
>  	(C) 2011 MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>, GPL
>  
>  Charger Manager provides in-kernel battery charger management that
> @@ -55,41 +58,39 @@ Charger Manager supports the following:
>  	notification to users with UEVENT.
>  
>  2. Global Charger-Manager Data related with suspend_again
> -========================================================
> +=========================================================
>  In order to setup Charger Manager with suspend-again feature
>  (in-suspend monitoring), the user should provide charger_global_desc
> -with setup_charger_manager(struct charger_global_desc *).
> +with setup_charger_manager(`struct charger_global_desc *`).
>  This charger_global_desc data for in-suspend monitoring is global
>  as the name suggests. Thus, the user needs to provide only once even
>  if there are multiple batteries. If there are multiple batteries, the
>  multiple instances of Charger Manager share the same charger_global_desc
>  and it will manage in-suspend monitoring for all instances of Charger Manager.
>  
> -The user needs to provide all the three entries properly in order to activate
> -in-suspend monitoring:
> +The user needs to provide all the three entries to `struct charger_global_desc`
> +properly in order to activate in-suspend monitoring:
>  
> -struct charger_global_desc {
> -
> -char *rtc_name;
> -	: The name of rtc (e.g., "rtc0") used to wakeup the system from
> +`char *rtc_name;`
> +	The name of rtc (e.g., "rtc0") used to wakeup the system from
>  	suspend for Charger Manager. The alarm interrupt (AIE) of the rtc
>  	should be able to wake up the system from suspend. Charger Manager
>  	saves and restores the alarm value and use the previously-defined
>  	alarm if it is going to go off earlier than Charger Manager so that
>  	Charger Manager does not interfere with previously-defined alarms.
>  
> -bool (*rtc_only_wakeup)(void);
> -	: This callback should let CM know whether
> +`bool (*rtc_only_wakeup)(void);`
> +	This callback should let CM know whether
>  	the wakeup-from-suspend is caused only by the alarm of "rtc" in the
>  	same struct. If there is any other wakeup source triggered the
>  	wakeup, it should return false. If the "rtc" is the only wakeup
>  	reason, it should return true.
>  
> -bool assume_timer_stops_in_suspend;
> -	: if true, Charger Manager assumes that
> +`bool assume_timer_stops_in_suspend;`
> +	if true, Charger Manager assumes that
>  	the timer (CM uses jiffies as timer) stops during suspend. Then, CM
>  	assumes that the suspend-duration is same as the alarm length.
> -};
> +
>  
>  3. How to setup suspend_again
>  =============================
> @@ -109,26 +110,28 @@ if the system was woken up by Charger Manager and the polling
>  =============================================
>  For each battery charged independently from other batteries (if a series of
>  batteries are charged by a single charger, they are counted as one independent
> -battery), an instance of Charger Manager is attached to it.
> +battery), an instance of Charger Manager is attached to it. The following
>  
> -struct charger_desc {
> +struct charger_desc elements:
>  
> -char *psy_name;
> -	: The power-supply-class name of the battery. Default is
> +`char *psy_name;`
> +	The power-supply-class name of the battery. Default is
>  	"battery" if psy_name is NULL. Users can access the psy entries
>  	at "/sys/class/power_supply/[psy_name]/".
>  
> -enum polling_modes polling_mode;
> -	: CM_POLL_DISABLE: do not poll this battery.
> -	  CM_POLL_ALWAYS: always poll this battery.
> -	  CM_POLL_EXTERNAL_POWER_ONLY: poll this battery if and only if
> -				       an external power source is attached.
> -	  CM_POLL_CHARGING_ONLY: poll this battery if and only if the
> -				 battery is being charged.
> +`enum polling_modes polling_mode;`
> +	  CM_POLL_DISABLE:
> +		do not poll this battery.
> +	  CM_POLL_ALWAYS:
> +		always poll this battery.
> +	  CM_POLL_EXTERNAL_POWER_ONLY:
> +		poll this battery if and only if an external power
> +		source is attached.
> +	  CM_POLL_CHARGING_ONLY:
> +		poll this battery if and only if the battery is being charged.
>  
> -unsigned int fullbatt_vchkdrop_ms;
> -unsigned int fullbatt_vchkdrop_uV;
> -	: If both have non-zero values, Charger Manager will check the
> +`unsigned int fullbatt_vchkdrop_ms; / unsigned int fullbatt_vchkdrop_uV;`
> +	If both have non-zero values, Charger Manager will check the
>  	battery voltage drop fullbatt_vchkdrop_ms after the battery is fully
>  	charged. If the voltage drop is over fullbatt_vchkdrop_uV, Charger
>  	Manager will try to recharge the battery by disabling and enabling
> @@ -136,50 +139,52 @@ unsigned int fullbatt_vchkdrop_uV;
>  	condition) is needed to be implemented with hardware interrupts from
>  	fuel gauges or charger devices/chips.
>  
> -unsigned int fullbatt_uV;
> -	: If specified with a non-zero value, Charger Manager assumes
> +`unsigned int fullbatt_uV;`
> +	If specified with a non-zero value, Charger Manager assumes
>  	that the battery is full (capacity = 100) if the battery is not being
>  	charged and the battery voltage is equal to or greater than
>  	fullbatt_uV.
>  
> -unsigned int polling_interval_ms;
> -	: Required polling interval in ms. Charger Manager will poll
> +`unsigned int polling_interval_ms;`
> +	Required polling interval in ms. Charger Manager will poll
>  	this battery every polling_interval_ms or more frequently.
>  
> -enum data_source battery_present;
> -	: CM_BATTERY_PRESENT: assume that the battery exists.
> -	CM_NO_BATTERY: assume that the battery does not exists.
> -	CM_FUEL_GAUGE: get battery presence information from fuel gauge.
> -	CM_CHARGER_STAT: get battery presence from chargers.
> +`enum data_source battery_present;`
> +	CM_BATTERY_PRESENT:
> +		assume that the battery exists.
> +	CM_NO_BATTERY:
> +		assume that the battery does not exists.
> +	CM_FUEL_GAUGE:
> +		get battery presence information from fuel gauge.
> +	CM_CHARGER_STAT:
> +		get battery presence from chargers.
>  
> -char **psy_charger_stat;
> -	: An array ending with NULL that has power-supply-class names of
> +`char **psy_charger_stat;`
> +	An array ending with NULL that has power-supply-class names of
>  	chargers. Each power-supply-class should provide "PRESENT" (if
>  	battery_present is "CM_CHARGER_STAT"), "ONLINE" (shows whether an
>  	external power source is attached or not), and "STATUS" (shows whether
>  	the battery is {"FULL" or not FULL} or {"FULL", "Charging",
>  	"Discharging", "NotCharging"}).
>  
> -int num_charger_regulators;
> -struct regulator_bulk_data *charger_regulators;
> -	: Regulators representing the chargers in the form for
> +`int num_charger_regulators; / struct regulator_bulk_data *charger_regulators;`
> +	Regulators representing the chargers in the form for
>  	regulator framework's bulk functions.
>  
> -char *psy_fuel_gauge;
> -	: Power-supply-class name of the fuel gauge.
> +`char *psy_fuel_gauge;`
> +	Power-supply-class name of the fuel gauge.
>  
> -int (*temperature_out_of_range)(int *mC);
> -bool measure_battery_temp;
> -	: This callback returns 0 if the temperature is safe for charging,
> +`int (*temperature_out_of_range)(int *mC); / bool measure_battery_temp;`
> +	This callback returns 0 if the temperature is safe for charging,
>  	a positive number if it is too hot to charge, and a negative number
>  	if it is too cold to charge. With the variable mC, the callback returns
>  	the temperature in 1/1000 of centigrade.
>  	The source of temperature can be battery or ambient one according to
>  	the value of measure_battery_temp.
> -};
> +
>  
>  5. Notify Charger-Manager of charger events: cm_notify_event()
> -=========================================================
> +==============================================================
>  If there is an charger event is required to notify
>  Charger Manager, a charger device driver that triggers the event can call
>  cm_notify_event(psy, type, msg) to notify the corresponding Charger Manager.
> diff --git a/Documentation/power/drivers-testing.txt b/Documentation/power/drivers-testing.rst
> similarity index 86%
> rename from Documentation/power/drivers-testing.txt
> rename to Documentation/power/drivers-testing.rst
> index 638afdf4d6b8..e53f1999fc39 100644
> --- a/Documentation/power/drivers-testing.txt
> +++ b/Documentation/power/drivers-testing.rst
> @@ -1,7 +1,11 @@
> +====================================================
>  Testing suspend and resume support in device drivers
> +====================================================
> +
>  	(C) 2007 Rafael J. Wysocki <rjw@xxxxxxx>, GPL
>  
>  1. Preparing the test system
> +============================
>  
>  Unfortunately, to effectively test the support for the system-wide suspend and
>  resume transitions in a driver, it is necessary to suspend and resume a fully
> @@ -14,19 +18,20 @@ the machine's BIOS.
>  Of course, for this purpose the test system has to be known to suspend and
>  resume without the driver being tested.  Thus, if possible, you should first
>  resolve all suspend/resume-related problems in the test system before you start
> -testing the new driver.  Please see Documentation/power/basic-pm-debugging.txt
> +testing the new driver.  Please see Documentation/power/basic-pm-debugging.rst
>  for more information about the debugging of suspend/resume functionality.
>  
>  2. Testing the driver
> +=====================
>  
>  Once you have resolved the suspend/resume-related problems with your test system
>  without the new driver, you are ready to test it:
>  
>  a) Build the driver as a module, load it and try the test modes of hibernation
> -   (see: Documentation/power/basic-pm-debugging.txt, 1).
> +   (see: Documentation/power/basic-pm-debugging.rst, 1).
>  
>  b) Load the driver and attempt to hibernate in the "reboot", "shutdown" and
> -   "platform" modes (see: Documentation/power/basic-pm-debugging.txt, 1).
> +   "platform" modes (see: Documentation/power/basic-pm-debugging.rst, 1).
>  
>  c) Compile the driver directly into the kernel and try the test modes of
>     hibernation.
> @@ -34,12 +39,12 @@ c) Compile the driver directly into the kernel and try the test modes of
>  d) Attempt to hibernate with the driver compiled directly into the kernel
>     in the "reboot", "shutdown" and "platform" modes.
>  
> -e) Try the test modes of suspend (see: Documentation/power/basic-pm-debugging.txt,
> +e) Try the test modes of suspend (see: Documentation/power/basic-pm-debugging.rst,
>     2).  [As far as the STR tests are concerned, it should not matter whether or
>     not the driver is built as a module.]
>  
>  f) Attempt to suspend to RAM using the s2ram tool with the driver loaded
> -   (see: Documentation/power/basic-pm-debugging.txt, 2).
> +   (see: Documentation/power/basic-pm-debugging.rst, 2).
>  
>  Each of the above tests should be repeated several times and the STD tests
>  should be mixed with the STR tests.  If any of them fails, the driver cannot be
> diff --git a/Documentation/power/energy-model.txt b/Documentation/power/energy-model.rst
> similarity index 74%
> rename from Documentation/power/energy-model.txt
> rename to Documentation/power/energy-model.rst
> index a2b0ae4c76bd..90a345d57ae9 100644
> --- a/Documentation/power/energy-model.txt
> +++ b/Documentation/power/energy-model.rst
> @@ -1,6 +1,6 @@
> -                           ====================
> -                           Energy Model of CPUs
> -                           ====================
> +====================
> +Energy Model of CPUs
> +====================
>  
>  1. Overview
>  -----------
> @@ -20,7 +20,7 @@ kernel, hence enabling to avoid redundant work.
>  
>  The figure below depicts an example of drivers (Arm-specific here, but the
>  approach is applicable to any architecture) providing power costs to the EM
> -framework, and interested clients reading the data from it.
> +framework, and interested clients reading the data from it::
>  
>         +---------------+  +-----------------+  +---------------+
>         | Thermal (IPA) |  | Scheduler (EAS) |  |     Other     |
> @@ -58,15 +58,17 @@ micro-architectures.
>  2. Core APIs
>  ------------
>  
> -  2.1 Config options
> +2.1 Config options
> +^^^^^^^^^^^^^^^^^^
>  
>  CONFIG_ENERGY_MODEL must be enabled to use the EM framework.
>  
>  
> -  2.2 Registration of performance domains
> +2.2 Registration of performance domains
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>  
>  Drivers are expected to register performance domains into the EM framework by
> -calling the following API:
> +calling the following API::
>  
>    int em_register_perf_domain(cpumask_t *span, unsigned int nr_states,
>  			      struct em_data_callback *cb);
> @@ -80,7 +82,8 @@ callback, and kernel/power/energy_model.c for further documentation on this
>  API.
>  
>  
> -  2.3 Accessing performance domains
> +2.3 Accessing performance domains
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>  
>  Subsystems interested in the energy model of a CPU can retrieve it using the
>  em_cpu_get() API. The energy model tables are allocated once upon creation of
> @@ -99,46 +102,46 @@ More details about the above APIs can be found in include/linux/energy_model.h.
>  This section provides a simple example of a CPUFreq driver registering a
>  performance domain in the Energy Model framework using the (fake) 'foo'
>  protocol. The driver implements an est_power() function to be provided to the
> -EM framework.
> +EM framework::
>  
> - -> drivers/cpufreq/foo_cpufreq.c
> +  -> drivers/cpufreq/foo_cpufreq.c
>  
> -01	static int est_power(unsigned long *mW, unsigned long *KHz, int cpu)
> -02	{
> -03		long freq, power;
> -04
> -05		/* Use the 'foo' protocol to ceil the frequency */
> -06		freq = foo_get_freq_ceil(cpu, *KHz);
> -07		if (freq < 0);
> -08			return freq;
> -09
> -10		/* Estimate the power cost for the CPU at the relevant freq. */
> -11		power = foo_estimate_power(cpu, freq);
> -12		if (power < 0);
> -13			return power;
> -14
> -15		/* Return the values to the EM framework */
> -16		*mW = power;
> -17		*KHz = freq;
> -18
> -19		return 0;
> -20	}
> -21
> -22	static int foo_cpufreq_init(struct cpufreq_policy *policy)
> -23	{
> -24		struct em_data_callback em_cb = EM_DATA_CB(est_power);
> -25		int nr_opp, ret;
> -26
> -27		/* Do the actual CPUFreq init work ... */
> -28		ret = do_foo_cpufreq_init(policy);
> -29		if (ret)
> -30			return ret;
> -31
> -32		/* Find the number of OPPs for this policy */
> -33		nr_opp = foo_get_nr_opp(policy);
> -34
> -35		/* And register the new performance domain */
> -36		em_register_perf_domain(policy->cpus, nr_opp, &em_cb);
> -37
> -38	        return 0;
> -39	}
> +  01	static int est_power(unsigned long *mW, unsigned long *KHz, int cpu)
> +  02	{
> +  03		long freq, power;
> +  04
> +  05		/* Use the 'foo' protocol to ceil the frequency */
> +  06		freq = foo_get_freq_ceil(cpu, *KHz);
> +  07		if (freq < 0);
> +  08			return freq;
> +  09
> +  10		/* Estimate the power cost for the CPU at the relevant freq. */
> +  11		power = foo_estimate_power(cpu, freq);
> +  12		if (power < 0);
> +  13			return power;
> +  14
> +  15		/* Return the values to the EM framework */
> +  16		*mW = power;
> +  17		*KHz = freq;
> +  18
> +  19		return 0;
> +  20	}
> +  21
> +  22	static int foo_cpufreq_init(struct cpufreq_policy *policy)
> +  23	{
> +  24		struct em_data_callback em_cb = EM_DATA_CB(est_power);
> +  25		int nr_opp, ret;
> +  26
> +  27		/* Do the actual CPUFreq init work ... */
> +  28		ret = do_foo_cpufreq_init(policy);
> +  29		if (ret)
> +  30			return ret;
> +  31
> +  32		/* Find the number of OPPs for this policy */
> +  33		nr_opp = foo_get_nr_opp(policy);
> +  34
> +  35		/* And register the new performance domain */
> +  36		em_register_perf_domain(policy->cpus, nr_opp, &em_cb);
> +  37
> +  38	        return 0;
> +  39	}
> diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.rst
> similarity index 75%
> rename from Documentation/power/freezing-of-tasks.txt
> rename to Documentation/power/freezing-of-tasks.rst
> index cd283190855a..ef110fe55e82 100644
> --- a/Documentation/power/freezing-of-tasks.txt
> +++ b/Documentation/power/freezing-of-tasks.rst
> @@ -1,13 +1,18 @@
> +=================
>  Freezing of tasks
> -	(C) 2007 Rafael J. Wysocki <rjw@xxxxxxx>, GPL
> +=================
> +
> +(C) 2007 Rafael J. Wysocki <rjw@xxxxxxx>, GPL
>  
>  I. What is the freezing of tasks?
> +=================================
>  
>  The freezing of tasks is a mechanism by which user space processes and some
>  kernel threads are controlled during hibernation or system-wide suspend (on some
>  architectures).
>  
>  II. How does it work?
> +=====================
>  
>  There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN
>  and PF_FREEZER_SKIP (the last one is auxiliary).  The tasks that have
> @@ -41,7 +46,7 @@ explicitly in suitable places or use the wait_event_freezable() or
>  wait_event_freezable_timeout() macros (defined in include/linux/freezer.h)
>  that combine interruptible sleep with checking if the task is to be frozen and
>  calling try_to_freeze().  The main loop of a freezable kernel thread may look
> -like the following one:
> +like the following one::
>  
>  	set_freezable();
>  	do {
> @@ -65,7 +70,7 @@ order to clear the PF_FROZEN flag for each frozen task.  Then, the tasks that
>  have been frozen leave __refrigerator() and continue running.
>  
>  
> -Rationale behind the functions dealing with freezing and thawing of tasks:
> +Rationale behind the functions dealing with freezing and thawing of tasks
>  -------------------------------------------------------------------------
>  
>  freeze_processes():
> @@ -86,6 +91,7 @@ thaw_processes():
>  
>  
>  III. Which kernel threads are freezable?
> +========================================
>  
>  Kernel threads are not freezable by default.  However, a kernel thread may clear
>  PF_NOFREEZE for itself by calling set_freezable() (the resetting of PF_NOFREEZE
> @@ -93,37 +99,39 @@ directly is not allowed).  From this point it is regarded as freezable
>  and must call try_to_freeze() in a suitable place.
>  
>  IV. Why do we do that?
> +======================
>  
>  Generally speaking, there is a couple of reasons to use the freezing of tasks:
>  
>  1. The principal reason is to prevent filesystems from being damaged after
> -hibernation.  At the moment we have no simple means of checkpointing
> -filesystems, so if there are any modifications made to filesystem data and/or
> -metadata on disks, we cannot bring them back to the state from before the
> -modifications.  At the same time each hibernation image contains some
> -filesystem-related information that must be consistent with the state of the
> -on-disk data and metadata after the system memory state has been restored from
> -the image (otherwise the filesystems will be damaged in a nasty way, usually
> -making them almost impossible to repair).  We therefore freeze tasks that might
> -cause the on-disk filesystems' data and metadata to be modified after the
> -hibernation image has been created and before the system is finally powered off.
> -The majority of these are user space processes, but if any of the kernel threads
> -may cause something like this to happen, they have to be freezable.
> +   hibernation.  At the moment we have no simple means of checkpointing
> +   filesystems, so if there are any modifications made to filesystem data and/or
> +   metadata on disks, we cannot bring them back to the state from before the
> +   modifications.  At the same time each hibernation image contains some
> +   filesystem-related information that must be consistent with the state of the
> +   on-disk data and metadata after the system memory state has been restored
> +   from the image (otherwise the filesystems will be damaged in a nasty way,
> +   usually making them almost impossible to repair).  We therefore freeze
> +   tasks that might cause the on-disk filesystems' data and metadata to be
> +   modified after the hibernation image has been created and before the
> +   system is finally powered off. The majority of these are user space
> +   processes, but if any of the kernel threads may cause something like this
> +   to happen, they have to be freezable.
>  
>  2. Next, to create the hibernation image we need to free a sufficient amount of
> -memory (approximately 50% of available RAM) and we need to do that before
> -devices are deactivated, because we generally need them for swapping out.  Then,
> -after the memory for the image has been freed, we don't want tasks to allocate
> -additional memory and we prevent them from doing that by freezing them earlier.
> -[Of course, this also means that device drivers should not allocate substantial
> -amounts of memory from their .suspend() callbacks before hibernation, but this
> -is a separate issue.]
> +   memory (approximately 50% of available RAM) and we need to do that before
> +   devices are deactivated, because we generally need them for swapping out.
> +   Then, after the memory for the image has been freed, we don't want tasks
> +   to allocate additional memory and we prevent them from doing that by
> +   freezing them earlier. [Of course, this also means that device drivers
> +   should not allocate substantial amounts of memory from their .suspend()
> +   callbacks before hibernation, but this is a separate issue.]
>  
>  3. The third reason is to prevent user space processes and some kernel threads
> -from interfering with the suspending and resuming of devices.  A user space
> -process running on a second CPU while we are suspending devices may, for
> -example, be troublesome and without the freezing of tasks we would need some
> -safeguards against race conditions that might occur in such a case.
> +   from interfering with the suspending and resuming of devices.  A user space
> +   process running on a second CPU while we are suspending devices may, for
> +   example, be troublesome and without the freezing of tasks we would need some
> +   safeguards against race conditions that might occur in such a case.
>  
>  Although Linus Torvalds doesn't like the freezing of tasks, he said this in one
>  of the discussions on LKML (http://lkml.org/lkml/2007/4/27/608):
> @@ -132,7 +140,7 @@ of the discussions on LKML (http://lkml.org/lkml/2007/4/27/608):
>  
>  Linus: In many ways, 'at all'.
>  
> -I _do_ realize the IO request queue issues, and that we cannot actually do
> +I **do** realize the IO request queue issues, and that we cannot actually do
>  s2ram with some devices in the middle of a DMA.  So we want to be able to
>  avoid *that*, there's no question about that.  And I suspect that stopping
>  user threads and then waiting for a sync is practically one of the easier
> @@ -150,17 +158,18 @@ thawed after the driver's .resume() callback has run, so it won't be accessing
>  the device while it's suspended.
>  
>  4. Another reason for freezing tasks is to prevent user space processes from
> -realizing that hibernation (or suspend) operation takes place.  Ideally, user
> -space processes should not notice that such a system-wide operation has occurred
> -and should continue running without any problems after the restore (or resume
> -from suspend).  Unfortunately, in the most general case this is quite difficult
> -to achieve without the freezing of tasks.  Consider, for example, a process
> -that depends on all CPUs being online while it's running.  Since we need to
> -disable nonboot CPUs during the hibernation, if this process is not frozen, it
> -may notice that the number of CPUs has changed and may start to work incorrectly
> -because of that.
> +   realizing that hibernation (or suspend) operation takes place.  Ideally, user
> +   space processes should not notice that such a system-wide operation has
> +   occurred and should continue running without any problems after the restore
> +   (or resume from suspend).  Unfortunately, in the most general case this
> +   is quite difficult to achieve without the freezing of tasks.  Consider,
> +   for example, a process that depends on all CPUs being online while it's
> +   running.  Since we need to disable nonboot CPUs during the hibernation,
> +   if this process is not frozen, it may notice that the number of CPUs has
> +   changed and may start to work incorrectly because of that.
>  
>  V. Are there any problems related to the freezing of tasks?
> +===========================================================
>  
>  Yes, there are.
>  
> @@ -172,11 +181,12 @@ may be undesirable.  That's why kernel threads are not freezable by default.
>  
>  Second, there are the following two problems related to the freezing of user
>  space processes:
> +
>  1. Putting processes into an uninterruptible sleep distorts the load average.
>  2. Now that we have FUSE, plus the framework for doing device drivers in
> -userspace, it gets even more complicated because some userspace processes are
> -now doing the sorts of things that kernel threads do
> -(https://lists.linux-foundation.org/pipermail/linux-pm/2007-May/012309.html).
> +   userspace, it gets even more complicated because some userspace processes are
> +   now doing the sorts of things that kernel threads do
> +   (https://lists.linux-foundation.org/pipermail/linux-pm/2007-May/012309.html).
>  
>  The problem 1. seems to be fixable, although it hasn't been fixed so far.  The
>  other one is more serious, but it seems that we can work around it by using
> @@ -201,6 +211,7 @@ requested early enough using the suspend notifier API described in
>  Documentation/driver-api/pm/notifiers.rst.
>  
>  VI. Are there any precautions to be taken to prevent freezing failures?
> +=======================================================================
>  
>  Yes, there are.
>  
> @@ -226,6 +237,8 @@ So, to summarize, use [un]lock_system_sleep() instead of directly using
>  mutex_[un]lock(&system_transition_mutex). That would prevent freezing failures.
>  
>  V. Miscellaneous
> +================
> +
>  /sys/power/pm_freeze_timeout controls how long it will cost at most to freeze
>  all user space processes or all freezable kernel threads, in unit of millisecond.
>  The default value is 20000, with range of unsigned integer.
> diff --git a/Documentation/power/index.rst b/Documentation/power/index.rst
> new file mode 100644
> index 000000000000..20415f21e48a
> --- /dev/null
> +++ b/Documentation/power/index.rst
> @@ -0,0 +1,46 @@
> +:orphan:
> +
> +================
> +Power Management
> +================
> +
> +.. toctree::
> +    :maxdepth: 1
> +
> +    apm-acpi
> +    basic-pm-debugging
> +    charger-manager
> +    drivers-testing
> +    energy-model
> +    freezing-of-tasks
> +    interface
> +    opp
> +    pci
> +    pm_qos_interface
> +    power_supply_class
> +    runtime_pm
> +    s2ram
> +    suspend-and-cpuhotplug
> +    suspend-and-interrupts
> +    swsusp-and-swap-files
> +    swsusp-dmcrypt
> +    swsusp
> +    video
> +    tricks
> +
> +    userland-swsusp
> +
> +    powercap/powercap
> +
> +    regulator/consumer
> +    regulator/design
> +    regulator/machine
> +    regulator/overview
> +    regulator/regulator
> +
> +.. only::  subproject and html
> +
> +   Indices
> +   =======
> +
> +   * :ref:`genindex`
> diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.rst
> similarity index 84%
> rename from Documentation/power/interface.txt
> rename to Documentation/power/interface.rst
> index 27df7f98668a..8d270ed27228 100644
> --- a/Documentation/power/interface.txt
> +++ b/Documentation/power/interface.rst
> @@ -1,4 +1,6 @@
> +===========================================
>  Power Management Interface for System Sleep
> +===========================================
>  
>  Copyright (c) 2016 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
>  
> @@ -11,10 +13,10 @@ mounted at /sys).
>  
>  Reading from it returns a list of supported sleep states, encoded as:
>  
> -'freeze' (Suspend-to-Idle)
> -'standby' (Power-On Suspend)
> -'mem' (Suspend-to-RAM)
> -'disk' (Suspend-to-Disk)
> +- 'freeze' (Suspend-to-Idle)
> +- 'standby' (Power-On Suspend)
> +- 'mem' (Suspend-to-RAM)
> +- 'disk' (Suspend-to-Disk)
>  
>  Suspend-to-Idle is always supported.  Suspend-to-Disk is always supported
>  too as long the kernel has been configured to support hibernation at all
> @@ -32,18 +34,18 @@ Specifically, it tells the kernel what to do after creating a hibernation image.
>  
>  Reading from it returns a list of supported options encoded as:
>  
> -'platform' (put the system into sleep using a platform-provided method)
> -'shutdown' (shut the system down)
> -'reboot' (reboot the system)
> -'suspend' (trigger a Suspend-to-RAM transition)
> -'test_resume' (resume-after-hibernation test mode)
> +- 'platform' (put the system into sleep using a platform-provided method)
> +- 'shutdown' (shut the system down)
> +- 'reboot' (reboot the system)
> +- 'suspend' (trigger a Suspend-to-RAM transition)
> +- 'test_resume' (resume-after-hibernation test mode)
>  
>  The currently selected option is printed in square brackets.
>  
>  The 'platform' option is only available if the platform provides a special
>  mechanism to put the system to sleep after creating a hibernation image (ACPI
>  does that, for example).  The 'suspend' option is available if Suspend-to-RAM
> -is supported.  Refer to Documentation/power/basic-pm-debugging.txt for the
> +is supported.  Refer to Documentation/power/basic-pm-debugging.rst for the
>  description of the 'test_resume' option.
>  
>  To select an option, write the string representing it to /sys/power/disk.
> @@ -71,7 +73,7 @@ If /sys/power/pm_trace contains '1', the fingerprint of each suspend/resume
>  event point in turn will be stored in the RTC memory (overwriting the actual
>  RTC information), so it will survive a system crash if one occurs right after
>  storing it and it can be used later to identify the driver that caused the crash
> -to happen (see Documentation/power/s2ram.txt for more information).
> +to happen (see Documentation/power/s2ram.rst for more information).
>  
>  Initially it contains '0' which may be changed to '1' by writing a string
>  representing a nonzero integer into it.
> diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.rst
> similarity index 78%
> rename from Documentation/power/opp.txt
> rename to Documentation/power/opp.rst
> index 0c007e250cd1..b3cf1def9dee 100644
> --- a/Documentation/power/opp.txt
> +++ b/Documentation/power/opp.rst
> @@ -1,20 +1,23 @@
> +==========================================
>  Operating Performance Points (OPP) Library
>  ==========================================
>  
>  (C) 2009-2010 Nishanth Menon <nm@xxxxxx>, Texas Instruments Incorporated
>  
> -Contents
> ---------
> -1. Introduction
> -2. Initial OPP List Registration
> -3. OPP Search Functions
> -4. OPP Availability Control Functions
> -5. OPP Data Retrieval Functions
> -6. Data Structures
> +.. Contents
> +
> +  1. Introduction
> +  2. Initial OPP List Registration
> +  3. OPP Search Functions
> +  4. OPP Availability Control Functions
> +  5. OPP Data Retrieval Functions
> +  6. Data Structures
>  
>  1. Introduction
>  ===============
> +
>  1.1 What is an Operating Performance Point (OPP)?
> +-------------------------------------------------
>  
>  Complex SoCs of today consists of a multiple sub-modules working in conjunction.
>  In an operational system executing varied use cases, not all modules in the SoC
> @@ -28,16 +31,19 @@ the device will support per domain are called Operating Performance Points or
>  OPPs.
>  
>  As an example:
> +
>  Let us consider an MPU device which supports the following:
>  {300MHz at minimum voltage of 1V}, {800MHz at minimum voltage of 1.2V},
>  {1GHz at minimum voltage of 1.3V}
>  
>  We can represent these as three OPPs as the following {Hz, uV} tuples:
> -{300000000, 1000000}
> -{800000000, 1200000}
> -{1000000000, 1300000}
> +
> +- {300000000, 1000000}
> +- {800000000, 1200000}
> +- {1000000000, 1300000}
>  
>  1.2 Operating Performance Points Library
> +----------------------------------------
>  
>  OPP library provides a set of helper functions to organize and query the OPP
>  information. The library is located in drivers/base/power/opp.c and the header
> @@ -46,9 +52,10 @@ CONFIG_PM_OPP from power management menuconfig menu. OPP library depends on
>  CONFIG_PM as certain SoCs such as Texas Instrument's OMAP framework allows to
>  optionally boot at a certain OPP without needing cpufreq.
>  
> -Typical usage of the OPP library is as follows:
> -(users)		-> registers a set of default OPPs		-> (library)
> -SoC framework	-> modifies on required cases certain OPPs	-> OPP layer
> +Typical usage of the OPP library is as follows::
> +
> + (users)	-> registers a set of default OPPs		-> (library)
> + SoC framework	-> modifies on required cases certain OPPs	-> OPP layer
>  		-> queries to search/retrieve information	->
>  
>  OPP layer expects each domain to be represented by a unique device pointer. SoC
> @@ -57,8 +64,9 @@ list is expected to be an optimally small number typically around 5 per device.
>  This initial list contains a set of OPPs that the framework expects to be safely
>  enabled by default in the system.
>  
> -Note on OPP Availability:
> -------------------------
> +Note on OPP Availability
> +^^^^^^^^^^^^^^^^^^^^^^^^
> +
>  As the system proceeds to operate, SoC framework may choose to make certain
>  OPPs available or not available on each device based on various external
>  factors. Example usage: Thermal management or other exceptional situations where
> @@ -88,7 +96,8 @@ registering the OPPs is maintained by OPP library throughout the device
>  operation. The SoC framework can subsequently control the availability of the
>  OPPs dynamically using the dev_pm_opp_enable / disable functions.
>  
> -dev_pm_opp_add - Add a new OPP for a specific domain represented by the device pointer.
> +dev_pm_opp_add
> +	Add a new OPP for a specific domain represented by the device pointer.
>  	The OPP is defined using the frequency and voltage. Once added, the OPP
>  	is assumed to be available and control of it's availability can be done
>  	with the dev_pm_opp_enable/disable functions. OPP library internally stores
> @@ -96,9 +105,11 @@ dev_pm_opp_add - Add a new OPP for a specific domain represented by the device p
>  	used by SoC framework to define a optimal list as per the demands of
>  	SoC usage environment.
>  
> -	WARNING: Do not use this function in interrupt context.
> +	WARNING:
> +		Do not use this function in interrupt context.
> +
> +	Example::
>  
> -	Example:
>  	 soc_pm_init()
>  	 {
>  		/* Do things */
> @@ -125,12 +136,15 @@ Callers of these functions shall call dev_pm_opp_put() after they have used the
>  OPP. Otherwise the memory for the OPP will never get freed and result in
>  memleak.
>  
> -dev_pm_opp_find_freq_exact - Search for an OPP based on an *exact* frequency and
> +dev_pm_opp_find_freq_exact
> +	Search for an OPP based on an *exact* frequency and
>  	availability. This function is especially useful to enable an OPP which
>  	is not available by default.
>  	Example: In a case when SoC framework detects a situation where a
>  	higher frequency could be made available, it can use this function to
> -	find the OPP prior to call the dev_pm_opp_enable to actually make it available.
> +	find the OPP prior to call the dev_pm_opp_enable to actually make
> +	it available::
> +
>  	 opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false);
>  	 dev_pm_opp_put(opp);
>  	 /* dont operate on the pointer.. just do a sanity check.. */
> @@ -141,27 +155,34 @@ dev_pm_opp_find_freq_exact - Search for an OPP based on an *exact* frequency and
>  		dev_pm_opp_enable(dev,1000000000);
>  	 }
>  
> -	NOTE: This is the only search function that operates on OPPs which are
> -	not available.
> +	NOTE:
> +	  This is the only search function that operates on OPPs which are
> +	  not available.
>  
> -dev_pm_opp_find_freq_floor - Search for an available OPP which is *at most* the
> +dev_pm_opp_find_freq_floor
> +	Search for an available OPP which is *at most* the
>  	provided frequency. This function is useful while searching for a lesser
>  	match OR operating on OPP information in the order of decreasing
>  	frequency.
> -	Example: To find the highest opp for a device:
> +	Example: To find the highest opp for a device::
> +
>  	 freq = ULONG_MAX;
>  	 opp = dev_pm_opp_find_freq_floor(dev, &freq);
>  	 dev_pm_opp_put(opp);
>  
> -dev_pm_opp_find_freq_ceil - Search for an available OPP which is *at least* the
> +dev_pm_opp_find_freq_ceil
> +	Search for an available OPP which is *at least* the
>  	provided frequency. This function is useful while searching for a
>  	higher match OR operating on OPP information in the order of increasing
>  	frequency.
> -	Example 1: To find the lowest opp for a device:
> +	Example 1: To find the lowest opp for a device::
> +
>  	 freq = 0;
>  	 opp = dev_pm_opp_find_freq_ceil(dev, &freq);
>  	 dev_pm_opp_put(opp);
> -	Example 2: A simplified implementation of a SoC cpufreq_driver->target:
> +
> +	Example 2: A simplified implementation of a SoC cpufreq_driver->target::
> +
>  	 soc_cpufreq_target(..)
>  	 {
>  		/* Do stuff like policy checks etc. */
> @@ -184,12 +205,15 @@ fine grained dynamic control of which sets of OPPs are operationally available.
>  These functions are intended to *temporarily* remove an OPP in conditions such
>  as thermal considerations (e.g. don't use OPPx until the temperature drops).
>  
> -WARNING: Do not use these functions in interrupt context.
> +WARNING:
> +	Do not use these functions in interrupt context.
>  
> -dev_pm_opp_enable - Make a OPP available for operation.
> +dev_pm_opp_enable
> +	Make a OPP available for operation.
>  	Example: Lets say that 1GHz OPP is to be made available only if the
>  	SoC temperature is lower than a certain threshold. The SoC framework
> -	implementation might choose to do something as follows:
> +	implementation might choose to do something as follows::
> +
>  	 if (cur_temp < temp_low_thresh) {
>  		/* Enable 1GHz if it was disabled */
>  		opp = dev_pm_opp_find_freq_exact(dev, 1000000000, false);
> @@ -201,10 +225,12 @@ dev_pm_opp_enable - Make a OPP available for operation.
>  			goto try_something_else;
>  	 }
>  
> -dev_pm_opp_disable - Make an OPP to be not available for operation
> +dev_pm_opp_disable
> +	Make an OPP to be not available for operation
>  	Example: Lets say that 1GHz OPP is to be disabled if the temperature
>  	exceeds a threshold value. The SoC framework implementation might
> -	choose to do something as follows:
> +	choose to do something as follows::
> +
>  	 if (cur_temp > temp_high_thresh) {
>  		/* Disable 1GHz if it was enabled */
>  		opp = dev_pm_opp_find_freq_exact(dev, 1000000000, true);
> @@ -223,11 +249,13 @@ information from the OPP structure is necessary. Once an OPP pointer is
>  retrieved using the search functions, the following functions can be used by SoC
>  framework to retrieve the information represented inside the OPP layer.
>  
> -dev_pm_opp_get_voltage - Retrieve the voltage represented by the opp pointer.
> +dev_pm_opp_get_voltage
> +	Retrieve the voltage represented by the opp pointer.
>  	Example: At a cpufreq transition to a different frequency, SoC
>  	framework requires to set the voltage represented by the OPP using
>  	the regulator framework to the Power Management chip providing the
> -	voltage.
> +	voltage::
> +
>  	 soc_switch_to_freq_voltage(freq)
>  	 {
>  		/* do things */
> @@ -239,10 +267,12 @@ dev_pm_opp_get_voltage - Retrieve the voltage represented by the opp pointer.
>  		/* do other things */
>  	 }
>  
> -dev_pm_opp_get_freq - Retrieve the freq represented by the opp pointer.
> +dev_pm_opp_get_freq
> +	Retrieve the freq represented by the opp pointer.
>  	Example: Lets say the SoC framework uses a couple of helper functions
>  	we could pass opp pointers instead of doing additional parameters to
> -	handle quiet a bit of data parameters.
> +	handle quiet a bit of data parameters::
> +
>  	 soc_cpufreq_target(..)
>  	 {
>  		/* do things.. */
> @@ -264,9 +294,11 @@ dev_pm_opp_get_freq - Retrieve the freq represented by the opp pointer.
>  		/* do things.. */
>  	 }
>  
> -dev_pm_opp_get_opp_count - Retrieve the number of available opps for a device
> +dev_pm_opp_get_opp_count
> +	Retrieve the number of available opps for a device
>  	Example: Lets say a co-processor in the SoC needs to know the available
> -	frequencies in a table, the main processor can notify as following:
> +	frequencies in a table, the main processor can notify as following::
> +
>  	 soc_notify_coproc_available_frequencies()
>  	 {
>  		/* Do things */
> @@ -289,54 +321,59 @@ dev_pm_opp_get_opp_count - Retrieve the number of available opps for a device
>  ==================
>  Typically an SoC contains multiple voltage domains which are variable. Each
>  domain is represented by a device pointer. The relationship to OPP can be
> -represented as follows:
> -SoC
> - |- device 1
> - |	|- opp 1 (availability, freq, voltage)
> - |	|- opp 2 ..
> - ...	...
> - |	`- opp n ..
> - |- device 2
> - ...
> - `- device m
> +represented as follows::
> +
> +  SoC
> +   |- device 1
> +   |	|- opp 1 (availability, freq, voltage)
> +   |	|- opp 2 ..
> +   ...	...
> +   |	`- opp n ..
> +   |- device 2
> +   ...
> +   `- device m
>  
>  OPP library maintains a internal list that the SoC framework populates and
>  accessed by various functions as described above. However, the structures
>  representing the actual OPPs and domains are internal to the OPP library itself
>  to allow for suitable abstraction reusable across systems.
>  
> -struct dev_pm_opp - The internal data structure of OPP library which is used to
> +struct dev_pm_opp
> +	The internal data structure of OPP library which is used to
>  	represent an OPP. In addition to the freq, voltage, availability
>  	information, it also contains internal book keeping information required
>  	for the OPP library to operate on.  Pointer to this structure is
>  	provided back to the users such as SoC framework to be used as a
>  	identifier for OPP in the interactions with OPP layer.
>  
> -	WARNING: The struct dev_pm_opp pointer should not be parsed or modified by the
> -	users. The defaults of for an instance is populated by dev_pm_opp_add, but the
> -	availability of the OPP can be modified by dev_pm_opp_enable/disable functions.
> +	WARNING:
> +	  The struct dev_pm_opp pointer should not be parsed or modified by the
> +	  users. The defaults of for an instance is populated by
> +	  dev_pm_opp_add, but the availability of the OPP can be modified
> +	  by dev_pm_opp_enable/disable functions.
>  
> -struct device - This is used to identify a domain to the OPP layer. The
> +struct device
> +	This is used to identify a domain to the OPP layer. The
>  	nature of the device and it's implementation is left to the user of
>  	OPP library such as the SoC framework.
>  
>  Overall, in a simplistic view, the data structure operations is represented as
> -following:
> +following::
>  
> -Initialization / modification:
> -            +-----+        /- dev_pm_opp_enable
> -dev_pm_opp_add --> | opp | <-------
> -  |         +-----+        \- dev_pm_opp_disable
> -  \-------> domain_info(device)
> +  Initialization / modification:
> +              +-----+        /- dev_pm_opp_enable
> +  dev_pm_opp_add --> | opp | <-------
> +    |         +-----+        \- dev_pm_opp_disable
> +    \-------> domain_info(device)
>  
> -Search functions:
> -             /-- dev_pm_opp_find_freq_ceil  ---\   +-----+
> -domain_info<---- dev_pm_opp_find_freq_exact -----> | opp |
> -             \-- dev_pm_opp_find_freq_floor ---/   +-----+
> +  Search functions:
> +               /-- dev_pm_opp_find_freq_ceil  ---\   +-----+
> +  domain_info<---- dev_pm_opp_find_freq_exact -----> | opp |
> +               \-- dev_pm_opp_find_freq_floor ---/   +-----+
>  
> -Retrieval functions:
> -+-----+     /- dev_pm_opp_get_voltage
> -| opp | <---
> -+-----+     \- dev_pm_opp_get_freq
> +  Retrieval functions:
> +  +-----+     /- dev_pm_opp_get_voltage
> +  | opp | <---
> +  +-----+     \- dev_pm_opp_get_freq
>  
> -domain_info <- dev_pm_opp_get_opp_count
> +  domain_info <- dev_pm_opp_get_opp_count
> diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.rst
> similarity index 97%
> rename from Documentation/power/pci.txt
> rename to Documentation/power/pci.rst
> index 8eaf9ee24d43..0e2ef7429304 100644
> --- a/Documentation/power/pci.txt
> +++ b/Documentation/power/pci.rst
> @@ -1,4 +1,6 @@
> +====================
>  PCI Power Management
> +====================
>  
>  Copyright (c) 2010 Rafael J. Wysocki <rjw@xxxxxxx>, Novell Inc.
>  
> @@ -9,14 +11,14 @@ management.  Based on previous work by Patrick Mochel <mochel@xxxxxxxxxxxxx>
>  This document only covers the aspects of power management specific to PCI
>  devices.  For general description of the kernel's interfaces related to device
>  power management refer to Documentation/driver-api/pm/devices.rst and
> -Documentation/power/runtime_pm.txt.
> +Documentation/power/runtime_pm.rst.
>  
> ----------------------------------------------------------------------------
> +.. contents:
>  
> -1. Hardware and Platform Support for PCI Power Management
> -2. PCI Subsystem and Device Power Management
> -3. PCI Device Drivers and Power Management
> -4. Resources
> +   1. Hardware and Platform Support for PCI Power Management
> +   2. PCI Subsystem and Device Power Management
> +   3. PCI Device Drivers and Power Management
> +   4. Resources
>  
>  
>  1. Hardware and Platform Support for PCI Power Management
> @@ -24,6 +26,7 @@ Documentation/power/runtime_pm.txt.
>  
>  1.1. Native and Platform-Based Power Management
>  -----------------------------------------------
> +
>  In general, power management is a feature allowing one to save energy by putting
>  devices into states in which they draw less power (low-power states) at the
>  price of reduced functionality or performance.
> @@ -67,6 +70,7 @@ mechanisms have to be used simultaneously to obtain the desired result.
>  
>  1.2. Native PCI Power Management
>  --------------------------------
> +
>  The PCI Bus Power Management Interface Specification (PCI PM Spec) was
>  introduced between the PCI 2.1 and PCI 2.2 Specifications.  It defined a
>  standard interface for performing various operations related to power
> @@ -134,6 +138,7 @@ sufficiently active to generate a wakeup signal.
>  
>  1.3. ACPI Device Power Management
>  ---------------------------------
> +
>  The platform firmware support for the power management of PCI devices is
>  system-specific.  However, if the system in question is compliant with the
>  Advanced Configuration and Power Interface (ACPI) Specification, like the
> @@ -194,6 +199,7 @@ enabled for the device to be able to generate wakeup signals.
>  
>  1.4. Wakeup Signaling
>  ---------------------
> +
>  Wakeup signals generated by PCI devices, either as native PCI PMEs, or as
>  a result of the execution of the _DSW (or _PSW) ACPI control method before
>  putting the device into a low-power state, have to be caught and handled as
> @@ -265,14 +271,15 @@ the native PCI Express PME signaling cannot be used by the kernel in that case.
>  
>  2.1. Device Power Management Callbacks
>  --------------------------------------
> +
>  The PCI Subsystem participates in the power management of PCI devices in a
>  number of ways.  First of all, it provides an intermediate code layer between
>  the device power management core (PM core) and PCI device drivers.
>  Specifically, the pm field of the PCI subsystem's struct bus_type object,
>  pci_bus_type, points to a struct dev_pm_ops object, pci_dev_pm_ops, containing
> -pointers to several device power management callbacks:
> +pointers to several device power management callbacks::
>  
> -const struct dev_pm_ops pci_dev_pm_ops = {
> +  const struct dev_pm_ops pci_dev_pm_ops = {
>  	.prepare = pci_pm_prepare,
>  	.complete = pci_pm_complete,
>  	.suspend = pci_pm_suspend,
> @@ -290,7 +297,7 @@ const struct dev_pm_ops pci_dev_pm_ops = {
>  	.runtime_suspend = pci_pm_runtime_suspend,
>  	.runtime_resume = pci_pm_runtime_resume,
>  	.runtime_idle = pci_pm_runtime_idle,
> -};
> +  };
>  
>  These callbacks are executed by the PM core in various situations related to
>  device power management and they, in turn, execute power management callbacks
> @@ -299,9 +306,9 @@ involving some standard configuration registers of PCI devices that device
>  drivers need not know or care about.
>  
>  The structure representing a PCI device, struct pci_dev, contains several fields
> -that these callbacks operate on:
> +that these callbacks operate on::
>  
> -struct pci_dev {
> +  struct pci_dev {
>  	...
>  	pci_power_t     current_state;  /* Current operating state. */
>  	int		pm_cap;		/* PM capability offset in the
> @@ -315,13 +322,14 @@ struct pci_dev {
>  	unsigned int	wakeup_prepared:1;  /* Device prepared for wake up */
>  	unsigned int	d3_delay;	/* D3->D0 transition time in ms */
>  	...
> -};
> +  };
>  
>  They also indirectly use some fields of the struct device that is embedded in
>  struct pci_dev.
>  
>  2.2. Device Initialization
>  --------------------------
> +
>  The PCI subsystem's first task related to device power management is to
>  prepare the device for power management and initialize the fields of struct
>  pci_dev used for this purpose.  This happens in two functions defined in
> @@ -348,10 +356,11 @@ during system-wide transitions to a sleep state and back to the working state.
>  
>  2.3. Runtime Device Power Management
>  ------------------------------------
> +
>  The PCI subsystem plays a vital role in the runtime power management of PCI
>  devices.  For this purpose it uses the general runtime power management
> -(runtime PM) framework described in Documentation/power/runtime_pm.txt.
> -Namely, it provides subsystem-level callbacks:
> +(runtime PM) framework described in Documentation/power/runtime_pm.rst.
> +Namely, it provides subsystem-level callbacks::
>  
>  	pci_pm_runtime_suspend()
>  	pci_pm_runtime_resume()
> @@ -425,13 +434,14 @@ to the given subsystem before the next phase begins.  These phases always run
>  after tasks have been frozen.
>  
>  2.4.1. System Suspend
> +^^^^^^^^^^^^^^^^^^^^^
>  
>  When the system is going into a sleep state in which the contents of memory will
>  be preserved, such as one of the ACPI sleep states S1-S3, the phases are:
>  
>  	prepare, suspend, suspend_noirq.
>  
> -The following PCI bus type's callbacks, respectively, are used in these phases:
> +The following PCI bus type's callbacks, respectively, are used in these phases::
>  
>  	pci_pm_prepare()
>  	pci_pm_suspend()
> @@ -492,6 +502,7 @@ this purpose).  PCI device drivers are not encouraged to do that, but in some
>  rare cases doing that in the driver may be the optimum approach.
>  
>  2.4.2. System Resume
> +^^^^^^^^^^^^^^^^^^^^
>  
>  When the system is undergoing a transition from a sleep state in which the
>  contents of memory have been preserved, such as one of the ACPI sleep states
> @@ -500,7 +511,7 @@ S1-S3, into the working state (ACPI S0), the phases are:
>  	resume_noirq, resume, complete.
>  
>  The following PCI bus type's callbacks, respectively, are executed in these
> -phases:
> +phases::
>  
>  	pci_pm_resume_noirq()
>  	pci_pm_resume()
> @@ -539,6 +550,7 @@ The pci_pm_complete() routine only executes the device driver's pm->complete()
>  callback, if defined.
>  
>  2.4.3. System Hibernation
> +^^^^^^^^^^^^^^^^^^^^^^^^^
>  
>  System hibernation is more complicated than system suspend, because it requires
>  a system image to be created and written into a persistent storage medium.  The
> @@ -551,7 +563,7 @@ to be free) in the following three phases:
>  
>  	prepare, freeze, freeze_noirq
>  
> -that correspond to the PCI bus type's callbacks:
> +that correspond to the PCI bus type's callbacks::
>  
>  	pci_pm_prepare()
>  	pci_pm_freeze()
> @@ -580,7 +592,7 @@ back to the fully functional state and this is done in the following phases:
>  
>  	thaw_noirq, thaw, complete
>  
> -using the following PCI bus type's callbacks:
> +using the following PCI bus type's callbacks::
>  
>  	pci_pm_thaw_noirq()
>  	pci_pm_thaw()
> @@ -608,7 +620,7 @@ three phases:
>  
>  where the prepare phase is exactly the same as for system suspend.  The other
>  two phases are analogous to the suspend and suspend_noirq phases, respectively.
> -The PCI subsystem-level callbacks they correspond to
> +The PCI subsystem-level callbacks they correspond to::
>  
>  	pci_pm_poweroff()
>  	pci_pm_poweroff_noirq()
> @@ -618,6 +630,7 @@ although they don't attempt to save the device's standard configuration
>  registers.
>  
>  2.4.4. System Restore
> +^^^^^^^^^^^^^^^^^^^^^
>  
>  System restore requires a hibernation image to be loaded into memory and the
>  pre-hibernation memory contents to be restored before the pre-hibernation system
> @@ -653,7 +666,7 @@ phases:
>  
>  The first two of these are analogous to the resume_noirq and resume phases
>  described above, respectively, and correspond to the following PCI subsystem
> -callbacks:
> +callbacks::
>  
>  	pci_pm_restore_noirq()
>  	pci_pm_restore()
> @@ -671,6 +684,7 @@ resume.
>  
>  3.1. Power Management Callbacks
>  -------------------------------
> +
>  PCI device drivers participate in power management by providing callbacks to be
>  executed by the PCI subsystem's power management routines described above and by
>  controlling the runtime power management of their devices.
> @@ -698,6 +712,7 @@ defined, though, they are expected to behave as described in the following
>  subsections.
>  
>  3.1.1. prepare()
> +^^^^^^^^^^^^^^^^
>  
>  The prepare() callback is executed during system suspend, during hibernation
>  (when a hibernation image is about to be created), during power-off after
> @@ -716,6 +731,7 @@ preallocated earlier, for example in a suspend/hibernate notifier as described
>  in Documentation/driver-api/pm/notifiers.rst).
>  
>  3.1.2. suspend()
> +^^^^^^^^^^^^^^^^
>  
>  The suspend() callback is only executed during system suspend, after prepare()
>  callbacks have been executed for all devices in the system.
> @@ -742,6 +758,7 @@ operations relying on the driver's ability to handle interrupts should be
>  carried out in this callback.
>  
>  3.1.3. suspend_noirq()
> +^^^^^^^^^^^^^^^^^^^^^^
>  
>  The suspend_noirq() callback is only executed during system suspend, after
>  suspend() callbacks have been executed for all devices in the system and
> @@ -753,6 +770,7 @@ suspend_noirq() can carry out operations that would cause race conditions to
>  arise if they were performed in suspend().
>  
>  3.1.4. freeze()
> +^^^^^^^^^^^^^^^
>  
>  The freeze() callback is hibernation-specific and is executed in two situations,
>  during hibernation, after prepare() callbacks have been executed for all devices
> @@ -770,6 +788,7 @@ or put it into a low-power state.  Still, either it or freeze_noirq() should
>  save the device's standard configuration registers using pci_save_state().
>  
>  3.1.5. freeze_noirq()
> +^^^^^^^^^^^^^^^^^^^^^
>  
>  The freeze_noirq() callback is hibernation-specific.  It is executed during
>  hibernation, after prepare() and freeze() callbacks have been executed for all
> @@ -786,6 +805,7 @@ The difference between freeze_noirq() and freeze() is analogous to the
>  difference between suspend_noirq() and suspend().
>  
>  3.1.6. poweroff()
> +^^^^^^^^^^^^^^^^^
>  
>  The poweroff() callback is hibernation-specific.  It is executed when the system
>  is about to be powered off after saving a hibernation image to a persistent
> @@ -802,6 +822,7 @@ into a low-power state, respectively, but it need not save the device's standard
>  configuration registers.
>  
>  3.1.7. poweroff_noirq()
> +^^^^^^^^^^^^^^^^^^^^^^^
>  
>  The poweroff_noirq() callback is hibernation-specific.  It is executed after
>  poweroff() callbacks have been executed for all devices in the system.
> @@ -814,6 +835,7 @@ The difference between poweroff_noirq() and poweroff() is analogous to the
>  difference between suspend_noirq() and suspend().
>  
>  3.1.8. resume_noirq()
> +^^^^^^^^^^^^^^^^^^^^^
>  
>  The resume_noirq() callback is only executed during system resume, after the
>  PM core has enabled the non-boot CPUs.  The driver's interrupt handler will not
> @@ -827,6 +849,7 @@ it should only be used for performing operations that would lead to race
>  conditions if carried out by resume().
>  
>  3.1.9. resume()
> +^^^^^^^^^^^^^^^
>  
>  The resume() callback is only executed during system resume, after
>  resume_noirq() callbacks have been executed for all devices in the system and
> @@ -837,6 +860,7 @@ device and bringing it back to the fully functional state.  The device should be
>  able to process I/O in a usual way after resume() has returned.
>  
>  3.1.10. thaw_noirq()
> +^^^^^^^^^^^^^^^^^^^^
>  
>  The thaw_noirq() callback is hibernation-specific.  It is executed after a
>  system image has been created and the non-boot CPUs have been enabled by the PM
> @@ -851,6 +875,7 @@ freeze() and freeze_noirq(), so in general it does not need to modify the
>  contents of the device's registers.
>  
>  3.1.11. thaw()
> +^^^^^^^^^^^^^^
>  
>  The thaw() callback is hibernation-specific.  It is executed after thaw_noirq()
>  callbacks have been executed for all devices in the system and after device
> @@ -860,6 +885,7 @@ This callback is responsible for restoring the pre-freeze configuration of
>  the device, so that it will work in a usual way after thaw() has returned.
>  
>  3.1.12. restore_noirq()
> +^^^^^^^^^^^^^^^^^^^^^^^
>  
>  The restore_noirq() callback is hibernation-specific.  It is executed in the
>  restore_noirq phase of hibernation, when the boot kernel has passed control to
> @@ -875,6 +901,7 @@ For the vast majority of PCI device drivers there is no difference between
>  resume_noirq() and restore_noirq().
>  
>  3.1.13. restore()
> +^^^^^^^^^^^^^^^^^
>  
>  The restore() callback is hibernation-specific.  It is executed after
>  restore_noirq() callbacks have been executed for all devices in the system and
> @@ -888,14 +915,17 @@ For the vast majority of PCI device drivers there is no difference between
>  resume() and restore().
>  
>  3.1.14. complete()
> +^^^^^^^^^^^^^^^^^^
>  
>  The complete() callback is executed in the following situations:
> +
>    - during system resume, after resume() callbacks have been executed for all
>      devices,
>    - during hibernation, before saving the system image, after thaw() callbacks
>      have been executed for all devices,
>    - during system restore, when the system is going back to its pre-hibernation
>      state, after restore() callbacks have been executed for all devices.
> +
>  It also may be executed if the loading of a hibernation image into memory fails
>  (in that case it is run after thaw() callbacks have been executed for all
>  devices that have drivers in the boot kernel).
> @@ -904,6 +934,7 @@ This callback is entirely optional, although it may be necessary if the
>  prepare() callback performs operations that need to be reversed.
>  
>  3.1.15. runtime_suspend()
> +^^^^^^^^^^^^^^^^^^^^^^^^^
>  
>  The runtime_suspend() callback is specific to device runtime power management
>  (runtime PM).  It is executed by the PM core's runtime PM framework when the
> @@ -915,6 +946,7 @@ put into a low-power state, but it must allow the PCI subsystem to perform all
>  of the PCI-specific actions necessary for suspending the device.
>  
>  3.1.16. runtime_resume()
> +^^^^^^^^^^^^^^^^^^^^^^^^
>  
>  The runtime_resume() callback is specific to device runtime PM.  It is executed
>  by the PM core's runtime PM framework when the device is about to be resumed
> @@ -927,6 +959,7 @@ The device is expected to be able to process I/O in the usual way after
>  runtime_resume() has returned.
>  
>  3.1.17. runtime_idle()
> +^^^^^^^^^^^^^^^^^^^^^^
>  
>  The runtime_idle() callback is specific to device runtime PM.  It is executed
>  by the PM core's runtime PM framework whenever it may be desirable to suspend
> @@ -939,6 +972,7 @@ PCI subsystem will call pm_runtime_suspend() for the device, which in turn will
>  cause the driver's runtime_suspend() callback to be executed.
>  
>  3.1.18. Pointing Multiple Callback Pointers to One Routine
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>  
>  Although in principle each of the callbacks described in the previous
>  subsections can be defined as a separate function, it often is convenient to
> @@ -962,6 +996,7 @@ dev_pm_ops to indicate that one suspend routine is to be pointed to by the
>  be pointed to by the .resume(), .thaw(), and .restore() members.
>  
>  3.1.19. Driver Flags for Power Management
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>  
>  The PM core allows device drivers to set flags that influence the handling of
>  power management for the devices by the core itself and by middle layer code
> @@ -1007,6 +1042,7 @@ it.
>  
>  3.2. Device Runtime Power Management
>  ------------------------------------
> +
>  In addition to providing device power management callbacks PCI device drivers
>  are responsible for controlling the runtime power management (runtime PM) of
>  their devices.
> @@ -1073,22 +1109,27 @@ device the PM core automatically queues a request to check if the device is
>  idle), device drivers are generally responsible for queuing power management
>  requests for their devices.  For this purpose they should use the runtime PM
>  helper functions provided by the PM core, discussed in
> -Documentation/power/runtime_pm.txt.
> +Documentation/power/runtime_pm.rst.
>  
>  Devices can also be suspended and resumed synchronously, without placing a
>  request into pm_wq.  In the majority of cases this also is done by their
>  drivers that use helper functions provided by the PM core for this purpose.
>  
>  For more information on the runtime PM of devices refer to
> -Documentation/power/runtime_pm.txt.
> +Documentation/power/runtime_pm.rst.
>  
>  
>  4. Resources
>  ============
>  
>  PCI Local Bus Specification, Rev. 3.0
> +
>  PCI Bus Power Management Interface Specification, Rev. 1.2
> +
>  Advanced Configuration and Power Interface (ACPI) Specification, Rev. 3.0b
> +
>  PCI Express Base Specification, Rev. 2.0
> +
>  Documentation/driver-api/pm/devices.rst
> -Documentation/power/runtime_pm.txt
> +
> +Documentation/power/runtime_pm.rst
> diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.rst
> similarity index 62%
> rename from Documentation/power/pm_qos_interface.txt
> rename to Documentation/power/pm_qos_interface.rst
> index 19c5f7b1a7ba..945fc6d760c9 100644
> --- a/Documentation/power/pm_qos_interface.txt
> +++ b/Documentation/power/pm_qos_interface.rst
> @@ -1,4 +1,6 @@
> -PM Quality Of Service Interface.
> +===============================
> +PM Quality Of Service Interface
> +===============================
>  
>  This interface provides a kernel and user mode interface for registering
>  performance expectations by drivers, subsystems and user space applications on
> @@ -11,6 +13,7 @@ memory_bandwidth.
>  constraints and PM QoS flags.
>  
>  Each parameters have defined units:
> +
>   * latency: usec
>   * timeout: usec
>   * throughput: kbs (kilo bit / sec)
> @@ -18,6 +21,7 @@ Each parameters have defined units:
>  
>  
>  1. PM QoS framework
> +===================
>  
>  The infrastructure exposes multiple misc device nodes one per implemented
>  parameter.  The set of parameters implement is defined by pm_qos_power_init()
> @@ -37,38 +41,39 @@ reading the aggregated value does not require any locking mechanism.
>  From kernel mode the use of this interface is simple:
>  
>  void pm_qos_add_request(handle, param_class, target_value):
> -Will insert an element into the list for that identified PM QoS class with the
> -target value.  Upon change to this list the new target is recomputed and any
> -registered notifiers are called only if the target value is now different.
> -Clients of pm_qos need to save the returned handle for future use in other
> -pm_qos API functions.
> +  Will insert an element into the list for that identified PM QoS class with the
> +  target value.  Upon change to this list the new target is recomputed and any
> +  registered notifiers are called only if the target value is now different.
> +  Clients of pm_qos need to save the returned handle for future use in other
> +  pm_qos API functions.
>  
>  void pm_qos_update_request(handle, new_target_value):
> -Will update the list element pointed to by the handle with the new target value
> -and recompute the new aggregated target, calling the notification tree if the
> -target is changed.
> +  Will update the list element pointed to by the handle with the new target value
> +  and recompute the new aggregated target, calling the notification tree if the
> +  target is changed.
>  
>  void pm_qos_remove_request(handle):
> -Will remove the element.  After removal it will update the aggregate target and
> -call the notification tree if the target was changed as a result of removing
> -the request.
> +  Will remove the element.  After removal it will update the aggregate target and
> +  call the notification tree if the target was changed as a result of removing
> +  the request.
>  
>  int pm_qos_request(param_class):
> -Returns the aggregated value for a given PM QoS class.
> +  Returns the aggregated value for a given PM QoS class.
>  
>  int pm_qos_request_active(handle):
> -Returns if the request is still active, i.e. it has not been removed from a
> -PM QoS class constraints list.
> +  Returns if the request is still active, i.e. it has not been removed from a
> +  PM QoS class constraints list.
>  
>  int pm_qos_add_notifier(param_class, notifier):
> -Adds a notification callback function to the PM QoS class. The callback is
> -called when the aggregated value for the PM QoS class is changed.
> +  Adds a notification callback function to the PM QoS class. The callback is
> +  called when the aggregated value for the PM QoS class is changed.
>  
>  int pm_qos_remove_notifier(int param_class, notifier):
> -Removes the notification callback function for the PM QoS class.
> +  Removes the notification callback function for the PM QoS class.
>  
>  
>  From user mode:
> +
>  Only processes can register a pm_qos request.  To provide for automatic
>  cleanup of a process, the interface requires the process to register its
>  parameter requests in the following way:
> @@ -89,6 +94,7 @@ node.
>  
>  
>  2. PM QoS per-device latency and flags framework
> +================================================
>  
>  For each device, there are three lists of PM QoS requests. Two of them are
>  maintained along with the aggregated targets of resume latency and active
> @@ -107,73 +113,80 @@ the aggregated value does not require any locking mechanism.
>  From kernel mode the use of this interface is the following:
>  
>  int dev_pm_qos_add_request(device, handle, type, value):
> -Will insert an element into the list for that identified device with the
> -target value.  Upon change to this list the new target is recomputed and any
> -registered notifiers are called only if the target value is now different.
> -Clients of dev_pm_qos need to save the handle for future use in other
> -dev_pm_qos API functions.
> +  Will insert an element into the list for that identified device with the
> +  target value.  Upon change to this list the new target is recomputed and any
> +  registered notifiers are called only if the target value is now different.
> +  Clients of dev_pm_qos need to save the handle for future use in other
> +  dev_pm_qos API functions.
>  
>  int dev_pm_qos_update_request(handle, new_value):
> -Will update the list element pointed to by the handle with the new target value
> -and recompute the new aggregated target, calling the notification trees if the
> -target is changed.
> +  Will update the list element pointed to by the handle with the new target
> +  value and recompute the new aggregated target, calling the notification
> +  trees if the target is changed.
>  
>  int dev_pm_qos_remove_request(handle):
> -Will remove the element.  After removal it will update the aggregate target and
> -call the notification trees if the target was changed as a result of removing
> -the request.
> +  Will remove the element.  After removal it will update the aggregate target
> +  and call the notification trees if the target was changed as a result of
> +  removing the request.
>  
>  s32 dev_pm_qos_read_value(device):
> -Returns the aggregated value for a given device's constraints list.
> +  Returns the aggregated value for a given device's constraints list.
>  
>  enum pm_qos_flags_status dev_pm_qos_flags(device, mask)
> -Check PM QoS flags of the given device against the given mask of flags.
> -The meaning of the return values is as follows:
> -	PM_QOS_FLAGS_ALL: All flags from the mask are set
> -	PM_QOS_FLAGS_SOME: Some flags from the mask are set
> -	PM_QOS_FLAGS_NONE: No flags from the mask are set
> -	PM_QOS_FLAGS_UNDEFINED: The device's PM QoS structure has not been
> -			initialized or the list of requests is empty.
> +  Check PM QoS flags of the given device against the given mask of flags.
> +  The meaning of the return values is as follows:
> +
> +	PM_QOS_FLAGS_ALL:
> +		All flags from the mask are set
> +	PM_QOS_FLAGS_SOME:
> +		Some flags from the mask are set
> +	PM_QOS_FLAGS_NONE:
> +		No flags from the mask are set
> +	PM_QOS_FLAGS_UNDEFINED:
> +		The device's PM QoS structure has not been initialized
> +		or the list of requests is empty.
>  
>  int dev_pm_qos_add_ancestor_request(dev, handle, type, value)
> -Add a PM QoS request for the first direct ancestor of the given device whose
> -power.ignore_children flag is unset (for DEV_PM_QOS_RESUME_LATENCY requests)
> -or whose power.set_latency_tolerance callback pointer is not NULL (for
> -DEV_PM_QOS_LATENCY_TOLERANCE requests).
> +  Add a PM QoS request for the first direct ancestor of the given device whose
> +  power.ignore_children flag is unset (for DEV_PM_QOS_RESUME_LATENCY requests)
> +  or whose power.set_latency_tolerance callback pointer is not NULL (for
> +  DEV_PM_QOS_LATENCY_TOLERANCE requests).
>  
>  int dev_pm_qos_expose_latency_limit(device, value)
> -Add a request to the device's PM QoS list of resume latency constraints and
> -create a sysfs attribute pm_qos_resume_latency_us under the device's power
> -directory allowing user space to manipulate that request.
> +  Add a request to the device's PM QoS list of resume latency constraints and
> +  create a sysfs attribute pm_qos_resume_latency_us under the device's power
> +  directory allowing user space to manipulate that request.
>  
>  void dev_pm_qos_hide_latency_limit(device)
> -Drop the request added by dev_pm_qos_expose_latency_limit() from the device's
> -PM QoS list of resume latency constraints and remove sysfs attribute
> -pm_qos_resume_latency_us from the device's power directory.
> +  Drop the request added by dev_pm_qos_expose_latency_limit() from the device's
> +  PM QoS list of resume latency constraints and remove sysfs attribute
> +  pm_qos_resume_latency_us from the device's power directory.
>  
>  int dev_pm_qos_expose_flags(device, value)
> -Add a request to the device's PM QoS list of flags and create sysfs attribute
> -pm_qos_no_power_off under the device's power directory allowing user space to
> -change the value of the PM_QOS_FLAG_NO_POWER_OFF flag.
> +  Add a request to the device's PM QoS list of flags and create sysfs attribute
> +  pm_qos_no_power_off under the device's power directory allowing user space to
> +  change the value of the PM_QOS_FLAG_NO_POWER_OFF flag.
>  
>  void dev_pm_qos_hide_flags(device)
> -Drop the request added by dev_pm_qos_expose_flags() from the device's PM QoS list
> -of flags and remove sysfs attribute pm_qos_no_power_off from the device's power
> -directory.
> +  Drop the request added by dev_pm_qos_expose_flags() from the device's PM QoS list
> +  of flags and remove sysfs attribute pm_qos_no_power_off from the device's power
> +  directory.
>  
>  Notification mechanisms:
> +
>  The per-device PM QoS framework has a per-device notification tree.
>  
>  int dev_pm_qos_add_notifier(device, notifier):
> -Adds a notification callback function for the device.
> -The callback is called when the aggregated value of the device constraints list
> -is changed (for resume latency device PM QoS only).
> +  Adds a notification callback function for the device.
> +  The callback is called when the aggregated value of the device constraints list
> +  is changed (for resume latency device PM QoS only).
>  
>  int dev_pm_qos_remove_notifier(device, notifier):
> -Removes the notification callback function for the device.
> +  Removes the notification callback function for the device.
>  
>  
>  Active state latency tolerance
> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>  
>  This device PM QoS type is used to support systems in which hardware may switch
>  to energy-saving operation modes on the fly.  In those systems, if the operation
> diff --git a/Documentation/power/power_supply_class.rst b/Documentation/power/power_supply_class.rst
> new file mode 100644
> index 000000000000..3f2c3fe38a61
> --- /dev/null
> +++ b/Documentation/power/power_supply_class.rst
> @@ -0,0 +1,282 @@
> +========================
> +Linux power supply class
> +========================
> +
> +Synopsis
> +~~~~~~~~
> +Power supply class used to represent battery, UPS, AC or DC power supply
> +properties to user-space.
> +
> +It defines core set of attributes, which should be applicable to (almost)
> +every power supply out there. Attributes are available via sysfs and uevent
> +interfaces.
> +
> +Each attribute has well defined meaning, up to unit of measure used. While
> +the attributes provided are believed to be universally applicable to any
> +power supply, specific monitoring hardware may not be able to provide them
> +all, so any of them may be skipped.
> +
> +Power supply class is extensible, and allows to define drivers own attributes.
> +The core attribute set is subject to the standard Linux evolution (i.e.
> +if it will be found that some attribute is applicable to many power supply
> +types or their drivers, it can be added to the core set).
> +
> +It also integrates with LED framework, for the purpose of providing
> +typically expected feedback of battery charging/fully charged status and
> +AC/USB power supply online status. (Note that specific details of the
> +indication (including whether to use it at all) are fully controllable by
> +user and/or specific machine defaults, per design principles of LED
> +framework).
> +
> +
> +Attributes/properties
> +~~~~~~~~~~~~~~~~~~~~~
> +Power supply class has predefined set of attributes, this eliminates code
> +duplication across drivers. Power supply class insist on reusing its
> +predefined attributes *and* their units.
> +
> +So, userspace gets predictable set of attributes and their units for any
> +kind of power supply, and can process/present them to a user in consistent
> +manner. Results for different power supplies and machines are also directly
> +comparable.
> +
> +See drivers/power/supply/ds2760_battery.c and drivers/power/supply/pda_power.c
> +for the example how to declare and handle attributes.
> +
> +
> +Units
> +~~~~~
> +Quoting include/linux/power_supply.h:
> +
> +  All voltages, currents, charges, energies, time and temperatures in µV,
> +  µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise
> +  stated. It's driver's job to convert its raw values to units in which
> +  this class operates.
> +
> +
> +Attributes/properties detailed
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> ++--------------------------------------------------------------------------+
> +|               **Charge/Energy/Capacity - how to not confuse**            |
> ++--------------------------------------------------------------------------+
> +| **Because both "charge" (µAh) and "energy" (µWh) represents "capacity"   |
> +| of battery, this class distinguish these terms. Don't mix them!**        |
> +|                                                                          |
> +| - `CHARGE_*`                                                             |
> +|	attributes represents capacity in µAh only.                        |
> +| - `ENERGY_*`                                                             |
> +|	attributes represents capacity in µWh only.                        |
> +| - `CAPACITY`                                                             |
> +|	attribute represents capacity in *percents*, from 0 to 100.        |
> ++--------------------------------------------------------------------------+
> +
> +Postfixes:
> +
> +_AVG
> +  *hardware* averaged value, use it if your hardware is really able to
> +  report averaged values.
> +_NOW
> +  momentary/instantaneous values.
> +
> +STATUS
> +  this attribute represents operating status (charging, full,
> +  discharging (i.e. powering a load), etc.). This corresponds to
> +  `BATTERY_STATUS_*` values, as defined in battery.h.
> +
> +CHARGE_TYPE
> +  batteries can typically charge at different rates.
> +  This defines trickle and fast charges.  For batteries that
> +  are already charged or discharging, 'n/a' can be displayed (or
> +  'unknown', if the status is not known).
> +
> +AUTHENTIC
> +  indicates the power supply (battery or charger) connected
> +  to the platform is authentic(1) or non authentic(0).
> +
> +HEALTH
> +  represents health of the battery, values corresponds to
> +  POWER_SUPPLY_HEALTH_*, defined in battery.h.
> +
> +VOLTAGE_OCV
> +  open circuit voltage of the battery.
> +
> +VOLTAGE_MAX_DESIGN, VOLTAGE_MIN_DESIGN
> +  design values for maximal and minimal power supply voltages.
> +  Maximal/minimal means values of voltages when battery considered
> +  "full"/"empty" at normal conditions. Yes, there is no direct relation
> +  between voltage and battery capacity, but some dumb
> +  batteries use voltage for very approximated calculation of capacity.
> +  Battery driver also can use this attribute just to inform userspace
> +  about maximal and minimal voltage thresholds of a given battery.
> +
> +VOLTAGE_MAX, VOLTAGE_MIN
> +  same as _DESIGN voltage values except that these ones should be used
> +  if hardware could only guess (measure and retain) the thresholds of a
> +  given power supply.
> +
> +VOLTAGE_BOOT
> +  Reports the voltage measured during boot
> +
> +CURRENT_BOOT
> +  Reports the current measured during boot
> +
> +CHARGE_FULL_DESIGN, CHARGE_EMPTY_DESIGN
> +  design charge values, when battery considered full/empty.
> +
> +ENERGY_FULL_DESIGN, ENERGY_EMPTY_DESIGN
> +  same as above but for energy.
> +
> +CHARGE_FULL, CHARGE_EMPTY
> +  These attributes means "last remembered value of charge when battery
> +  became full/empty". It also could mean "value of charge when battery
> +  considered full/empty at given conditions (temperature, age)".
> +  I.e. these attributes represents real thresholds, not design values.
> +
> +ENERGY_FULL, ENERGY_EMPTY
> +  same as above but for energy.
> +
> +CHARGE_COUNTER
> +  the current charge counter (in µAh).  This could easily
> +  be negative; there is no empty or full value.  It is only useful for
> +  relative, time-based measurements.
> +
> +PRECHARGE_CURRENT
> +  the maximum charge current during precharge phase of charge cycle
> +  (typically 20% of battery capacity).
> +
> +CHARGE_TERM_CURRENT
> +  Charge termination current. The charge cycle terminates when battery
> +  voltage is above recharge threshold, and charge current is below
> +  this setting (typically 10% of battery capacity).
> +
> +CONSTANT_CHARGE_CURRENT
> +  constant charge current programmed by charger.
> +
> +
> +CONSTANT_CHARGE_CURRENT_MAX
> +  maximum charge current supported by the power supply object.
> +
> +CONSTANT_CHARGE_VOLTAGE
> +  constant charge voltage programmed by charger.
> +CONSTANT_CHARGE_VOLTAGE_MAX
> +  maximum charge voltage supported by the power supply object.
> +
> +INPUT_CURRENT_LIMIT
> +  input current limit programmed by charger. Indicates
> +  the current drawn from a charging source.
> +
> +CHARGE_CONTROL_LIMIT
> +  current charge control limit setting
> +CHARGE_CONTROL_LIMIT_MAX
> +  maximum charge control limit setting
> +
> +CALIBRATE
> +  battery or coulomb counter calibration status
> +
> +CAPACITY
> +  capacity in percents.
> +CAPACITY_ALERT_MIN
> +  minimum capacity alert value in percents.
> +CAPACITY_ALERT_MAX
> +  maximum capacity alert value in percents.
> +CAPACITY_LEVEL
> +  capacity level. This corresponds to POWER_SUPPLY_CAPACITY_LEVEL_*.
> +
> +TEMP
> +  temperature of the power supply.
> +TEMP_ALERT_MIN
> +  minimum battery temperature alert.
> +TEMP_ALERT_MAX
> +  maximum battery temperature alert.
> +TEMP_AMBIENT
> +  ambient temperature.
> +TEMP_AMBIENT_ALERT_MIN
> +  minimum ambient temperature alert.
> +TEMP_AMBIENT_ALERT_MAX
> +  maximum ambient temperature alert.
> +TEMP_MIN
> +  minimum operatable temperature
> +TEMP_MAX
> +  maximum operatable temperature
> +
> +TIME_TO_EMPTY
> +  seconds left for battery to be considered empty
> +  (i.e. while battery powers a load)
> +TIME_TO_FULL
> +  seconds left for battery to be considered full
> +  (i.e. while battery is charging)
> +
> +
> +Battery <-> external power supply interaction
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Often power supplies are acting as supplies and supplicants at the same
> +time. Batteries are good example. So, batteries usually care if they're
> +externally powered or not.
> +
> +For that case, power supply class implements notification mechanism for
> +batteries.
> +
> +External power supply (AC) lists supplicants (batteries) names in
> +"supplied_to" struct member, and each power_supply_changed() call
> +issued by external power supply will notify supplicants via
> +external_power_changed callback.
> +
> +
> +Devicetree battery characteristics
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Drivers should call power_supply_get_battery_info() to obtain battery
> +characteristics from a devicetree battery node, defined in
> +Documentation/devicetree/bindings/power/supply/battery.txt. This is
> +implemented in drivers/power/supply/bq27xxx_battery.c.
> +
> +Properties in struct power_supply_battery_info and their counterparts in the
> +battery node have names corresponding to elements in enum power_supply_property,
> +for naming consistency between sysfs attributes and battery node properties.
> +
> +
> +QA
> +~~
> +
> +Q:
> +   Where is POWER_SUPPLY_PROP_XYZ attribute?
> +A:
> +   If you cannot find attribute suitable for your driver needs, feel free
> +   to add it and send patch along with your driver.
> +
> +   The attributes available currently are the ones currently provided by the
> +   drivers written.
> +
> +   Good candidates to add in future: model/part#, cycle_time, manufacturer,
> +   etc.
> +
> +
> +Q:
> +   I have some very specific attribute (e.g. battery color), should I add
> +   this attribute to standard ones?
> +A:
> +   Most likely, no. Such attribute can be placed in the driver itself, if
> +   it is useful. Of course, if the attribute in question applicable to
> +   large set of batteries, provided by many drivers, and/or comes from
> +   some general battery specification/standard, it may be a candidate to
> +   be added to the core attribute set.
> +
> +
> +Q:
> +   Suppose, my battery monitoring chip/firmware does not provides capacity
> +   in percents, but provides charge_{now,full,empty}. Should I calculate
> +   percentage capacity manually, inside the driver, and register CAPACITY
> +   attribute? The same question about time_to_empty/time_to_full.
> +A:
> +   Most likely, no. This class is designed to export properties which are
> +   directly measurable by the specific hardware available.
> +
> +   Inferring not available properties using some heuristics or mathematical
> +   model is not subject of work for a battery driver. Such functionality
> +   should be factored out, and in fact, apm_power, the driver to serve
> +   legacy APM API on top of power supply class, uses a simple heuristic of
> +   approximating remaining battery capacity based on its charge, current,
> +   voltage and so on. But full-fledged battery model is likely not subject
> +   for kernel at all, as it would require floating point calculation to deal
> +   with things like differential equations and Kalman filters. This is
> +   better be handled by batteryd/libbattery, yet to be written.
> diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
> deleted file mode 100644
> index 300d37896e51..000000000000
> --- a/Documentation/power/power_supply_class.txt
> +++ /dev/null
> @@ -1,231 +0,0 @@
> -Linux power supply class
> -========================
> -
> -Synopsis
> -~~~~~~~~
> -Power supply class used to represent battery, UPS, AC or DC power supply
> -properties to user-space.
> -
> -It defines core set of attributes, which should be applicable to (almost)
> -every power supply out there. Attributes are available via sysfs and uevent
> -interfaces.
> -
> -Each attribute has well defined meaning, up to unit of measure used. While
> -the attributes provided are believed to be universally applicable to any
> -power supply, specific monitoring hardware may not be able to provide them
> -all, so any of them may be skipped.
> -
> -Power supply class is extensible, and allows to define drivers own attributes.
> -The core attribute set is subject to the standard Linux evolution (i.e.
> -if it will be found that some attribute is applicable to many power supply
> -types or their drivers, it can be added to the core set).
> -
> -It also integrates with LED framework, for the purpose of providing
> -typically expected feedback of battery charging/fully charged status and
> -AC/USB power supply online status. (Note that specific details of the
> -indication (including whether to use it at all) are fully controllable by
> -user and/or specific machine defaults, per design principles of LED
> -framework).
> -
> -
> -Attributes/properties
> -~~~~~~~~~~~~~~~~~~~~~
> -Power supply class has predefined set of attributes, this eliminates code
> -duplication across drivers. Power supply class insist on reusing its
> -predefined attributes *and* their units.
> -
> -So, userspace gets predictable set of attributes and their units for any
> -kind of power supply, and can process/present them to a user in consistent
> -manner. Results for different power supplies and machines are also directly
> -comparable.
> -
> -See drivers/power/supply/ds2760_battery.c and drivers/power/supply/pda_power.c
> -for the example how to declare and handle attributes.
> -
> -
> -Units
> -~~~~~
> -Quoting include/linux/power_supply.h:
> -
> -  All voltages, currents, charges, energies, time and temperatures in µV,
> -  µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise
> -  stated. It's driver's job to convert its raw values to units in which
> -  this class operates.
> -
> -
> -Attributes/properties detailed
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> -
> -~ ~ ~ ~ ~ ~ ~  Charge/Energy/Capacity - how to not confuse  ~ ~ ~ ~ ~ ~ ~
> -~                                                                       ~
> -~ Because both "charge" (µAh) and "energy" (µWh) represents "capacity"  ~
> -~ of battery, this class distinguish these terms. Don't mix them!       ~
> -~                                                                       ~
> -~ CHARGE_* attributes represents capacity in µAh only.                  ~
> -~ ENERGY_* attributes represents capacity in µWh only.                  ~
> -~ CAPACITY attribute represents capacity in *percents*, from 0 to 100.  ~
> -~                                                                       ~
> -~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> -
> -Postfixes:
> -_AVG - *hardware* averaged value, use it if your hardware is really able to
> -report averaged values.
> -_NOW - momentary/instantaneous values.
> -
> -STATUS - this attribute represents operating status (charging, full,
> -discharging (i.e. powering a load), etc.). This corresponds to
> -BATTERY_STATUS_* values, as defined in battery.h.
> -
> -CHARGE_TYPE - batteries can typically charge at different rates.
> -This defines trickle and fast charges.  For batteries that
> -are already charged or discharging, 'n/a' can be displayed (or
> -'unknown', if the status is not known).
> -
> -AUTHENTIC - indicates the power supply (battery or charger) connected
> -to the platform is authentic(1) or non authentic(0).
> -
> -HEALTH - represents health of the battery, values corresponds to
> -POWER_SUPPLY_HEALTH_*, defined in battery.h.
> -
> -VOLTAGE_OCV - open circuit voltage of the battery.
> -
> -VOLTAGE_MAX_DESIGN, VOLTAGE_MIN_DESIGN - design values for maximal and
> -minimal power supply voltages. Maximal/minimal means values of voltages
> -when battery considered "full"/"empty" at normal conditions. Yes, there is
> -no direct relation between voltage and battery capacity, but some dumb
> -batteries use voltage for very approximated calculation of capacity.
> -Battery driver also can use this attribute just to inform userspace
> -about maximal and minimal voltage thresholds of a given battery.
> -
> -VOLTAGE_MAX, VOLTAGE_MIN - same as _DESIGN voltage values except that
> -these ones should be used if hardware could only guess (measure and
> -retain) the thresholds of a given power supply.
> -
> -VOLTAGE_BOOT - Reports the voltage measured during boot
> -
> -CURRENT_BOOT - Reports the current measured during boot
> -
> -CHARGE_FULL_DESIGN, CHARGE_EMPTY_DESIGN - design charge values, when
> -battery considered full/empty.
> -
> -ENERGY_FULL_DESIGN, ENERGY_EMPTY_DESIGN - same as above but for energy.
> -
> -CHARGE_FULL, CHARGE_EMPTY - These attributes means "last remembered value
> -of charge when battery became full/empty". It also could mean "value of
> -charge when battery considered full/empty at given conditions (temperature,
> -age)". I.e. these attributes represents real thresholds, not design values.
> -
> -ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
> -
> -CHARGE_COUNTER - the current charge counter (in µAh).  This could easily
> -be negative; there is no empty or full value.  It is only useful for
> -relative, time-based measurements.
> -
> -PRECHARGE_CURRENT - the maximum charge current during precharge phase
> -of charge cycle (typically 20% of battery capacity).
> -CHARGE_TERM_CURRENT - Charge termination current. The charge cycle
> -terminates when battery voltage is above recharge threshold, and charge
> -current is below this setting (typically 10% of battery capacity).
> -
> -CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger.
> -CONSTANT_CHARGE_CURRENT_MAX - maximum charge current supported by the
> -power supply object.
> -
> -CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger.
> -CONSTANT_CHARGE_VOLTAGE_MAX - maximum charge voltage supported by the
> -power supply object.
> -
> -INPUT_CURRENT_LIMIT - input current limit programmed by charger. Indicates
> -the current drawn from a charging source.
> -
> -CHARGE_CONTROL_LIMIT - current charge control limit setting
> -CHARGE_CONTROL_LIMIT_MAX - maximum charge control limit setting
> -
> -CALIBRATE - battery or coulomb counter calibration status
> -
> -CAPACITY - capacity in percents.
> -CAPACITY_ALERT_MIN - minimum capacity alert value in percents.
> -CAPACITY_ALERT_MAX - maximum capacity alert value in percents.
> -CAPACITY_LEVEL - capacity level. This corresponds to
> -POWER_SUPPLY_CAPACITY_LEVEL_*.
> -
> -TEMP - temperature of the power supply.
> -TEMP_ALERT_MIN - minimum battery temperature alert.
> -TEMP_ALERT_MAX - maximum battery temperature alert.
> -TEMP_AMBIENT - ambient temperature.
> -TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert.
> -TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert.
> -TEMP_MIN - minimum operatable temperature
> -TEMP_MAX - maximum operatable temperature
> -
> -TIME_TO_EMPTY - seconds left for battery to be considered empty (i.e.
> -while battery powers a load)
> -TIME_TO_FULL - seconds left for battery to be considered full (i.e.
> -while battery is charging)
> -
> -
> -Battery <-> external power supply interaction
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> -Often power supplies are acting as supplies and supplicants at the same
> -time. Batteries are good example. So, batteries usually care if they're
> -externally powered or not.
> -
> -For that case, power supply class implements notification mechanism for
> -batteries.
> -
> -External power supply (AC) lists supplicants (batteries) names in
> -"supplied_to" struct member, and each power_supply_changed() call
> -issued by external power supply will notify supplicants via
> -external_power_changed callback.
> -
> -
> -Devicetree battery characteristics
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> -Drivers should call power_supply_get_battery_info() to obtain battery
> -characteristics from a devicetree battery node, defined in
> -Documentation/devicetree/bindings/power/supply/battery.txt. This is
> -implemented in drivers/power/supply/bq27xxx_battery.c.
> -
> -Properties in struct power_supply_battery_info and their counterparts in the
> -battery node have names corresponding to elements in enum power_supply_property,
> -for naming consistency between sysfs attributes and battery node properties.
> -
> -
> -QA
> -~~
> -Q: Where is POWER_SUPPLY_PROP_XYZ attribute?
> -A: If you cannot find attribute suitable for your driver needs, feel free
> -   to add it and send patch along with your driver.
> -
> -   The attributes available currently are the ones currently provided by the
> -   drivers written.
> -
> -   Good candidates to add in future: model/part#, cycle_time, manufacturer,
> -   etc.
> -
> -
> -Q: I have some very specific attribute (e.g. battery color), should I add
> -   this attribute to standard ones?
> -A: Most likely, no. Such attribute can be placed in the driver itself, if
> -   it is useful. Of course, if the attribute in question applicable to
> -   large set of batteries, provided by many drivers, and/or comes from
> -   some general battery specification/standard, it may be a candidate to
> -   be added to the core attribute set.
> -
> -
> -Q: Suppose, my battery monitoring chip/firmware does not provides capacity
> -   in percents, but provides charge_{now,full,empty}. Should I calculate
> -   percentage capacity manually, inside the driver, and register CAPACITY
> -   attribute? The same question about time_to_empty/time_to_full.
> -A: Most likely, no. This class is designed to export properties which are
> -   directly measurable by the specific hardware available.
> -
> -   Inferring not available properties using some heuristics or mathematical
> -   model is not subject of work for a battery driver. Such functionality
> -   should be factored out, and in fact, apm_power, the driver to serve
> -   legacy APM API on top of power supply class, uses a simple heuristic of
> -   approximating remaining battery capacity based on its charge, current,
> -   voltage and so on. But full-fledged battery model is likely not subject
> -   for kernel at all, as it would require floating point calculation to deal
> -   with things like differential equations and Kalman filters. This is
> -   better be handled by batteryd/libbattery, yet to be written.
> diff --git a/Documentation/power/powercap/powercap.rst b/Documentation/power/powercap/powercap.rst
> new file mode 100644
> index 000000000000..7ae3b44c7624
> --- /dev/null
> +++ b/Documentation/power/powercap/powercap.rst
> @@ -0,0 +1,257 @@
> +=======================
> +Power Capping Framework
> +=======================
> +
> +The power capping framework provides a consistent interface between the kernel
> +and the user space that allows power capping drivers to expose the settings to
> +user space in a uniform way.
> +
> +Terminology
> +===========
> +
> +The framework exposes power capping devices to user space via sysfs in the
> +form of a tree of objects. The objects at the root level of the tree represent
> +'control types', which correspond to different methods of power capping.  For
> +example, the intel-rapl control type represents the Intel "Running Average
> +Power Limit" (RAPL) technology, whereas the 'idle-injection' control type
> +corresponds to the use of idle injection for controlling power.
> +
> +Power zones represent different parts of the system, which can be controlled and
> +monitored using the power capping method determined by the control type the
> +given zone belongs to. They each contain attributes for monitoring power, as
> +well as controls represented in the form of power constraints.  If the parts of
> +the system represented by different power zones are hierarchical (that is, one
> +bigger part consists of multiple smaller parts that each have their own power
> +controls), those power zones may also be organized in a hierarchy with one
> +parent power zone containing multiple subzones and so on to reflect the power
> +control topology of the system.  In that case, it is possible to apply power
> +capping to a set of devices together using the parent power zone and if more
> +fine grained control is required, it can be applied through the subzones.
> +
> +
> +Example sysfs interface tree::
> +
> +  /sys/devices/virtual/powercap
> +  └──intel-rapl
> +      ├──intel-rapl:0
> +      │   ├──constraint_0_name
> +      │   ├──constraint_0_power_limit_uw
> +      │   ├──constraint_0_time_window_us
> +      │   ├──constraint_1_name
> +      │   ├──constraint_1_power_limit_uw
> +      │   ├──constraint_1_time_window_us
> +      │   ├──device -> ../../intel-rapl
> +      │   ├──energy_uj
> +      │   ├──intel-rapl:0:0
> +      │   │   ├──constraint_0_name
> +      │   │   ├──constraint_0_power_limit_uw
> +      │   │   ├──constraint_0_time_window_us
> +      │   │   ├──constraint_1_name
> +      │   │   ├──constraint_1_power_limit_uw
> +      │   │   ├──constraint_1_time_window_us
> +      │   │   ├──device -> ../../intel-rapl:0
> +      │   │   ├──energy_uj
> +      │   │   ├──max_energy_range_uj
> +      │   │   ├──name
> +      │   │   ├──enabled
> +      │   │   ├──power
> +      │   │   │   ├──async
> +      │   │   │   []
> +      │   │   ├──subsystem -> ../../../../../../class/power_cap
> +      │   │   └──uevent
> +      │   ├──intel-rapl:0:1
> +      │   │   ├──constraint_0_name
> +      │   │   ├──constraint_0_power_limit_uw
> +      │   │   ├──constraint_0_time_window_us
> +      │   │   ├──constraint_1_name
> +      │   │   ├──constraint_1_power_limit_uw
> +      │   │   ├──constraint_1_time_window_us
> +      │   │   ├──device -> ../../intel-rapl:0
> +      │   │   ├──energy_uj
> +      │   │   ├──max_energy_range_uj
> +      │   │   ├──name
> +      │   │   ├──enabled
> +      │   │   ├──power
> +      │   │   │   ├──async
> +      │   │   │   []
> +      │   │   ├──subsystem -> ../../../../../../class/power_cap
> +      │   │   └──uevent
> +      │   ├──max_energy_range_uj
> +      │   ├──max_power_range_uw
> +      │   ├──name
> +      │   ├──enabled
> +      │   ├──power
> +      │   │   ├──async
> +      │   │   []
> +      │   ├──subsystem -> ../../../../../class/power_cap
> +      │   ├──enabled
> +      │   ├──uevent
> +      ├──intel-rapl:1
> +      │   ├──constraint_0_name
> +      │   ├──constraint_0_power_limit_uw
> +      │   ├──constraint_0_time_window_us
> +      │   ├──constraint_1_name
> +      │   ├──constraint_1_power_limit_uw
> +      │   ├──constraint_1_time_window_us
> +      │   ├──device -> ../../intel-rapl
> +      │   ├──energy_uj
> +      │   ├──intel-rapl:1:0
> +      │   │   ├──constraint_0_name
> +      │   │   ├──constraint_0_power_limit_uw
> +      │   │   ├──constraint_0_time_window_us
> +      │   │   ├──constraint_1_name
> +      │   │   ├──constraint_1_power_limit_uw
> +      │   │   ├──constraint_1_time_window_us
> +      │   │   ├──device -> ../../intel-rapl:1
> +      │   │   ├──energy_uj
> +      │   │   ├──max_energy_range_uj
> +      │   │   ├──name
> +      │   │   ├──enabled
> +      │   │   ├──power
> +      │   │   │   ├──async
> +      │   │   │   []
> +      │   │   ├──subsystem -> ../../../../../../class/power_cap
> +      │   │   └──uevent
> +      │   ├──intel-rapl:1:1
> +      │   │   ├──constraint_0_name
> +      │   │   ├──constraint_0_power_limit_uw
> +      │   │   ├──constraint_0_time_window_us
> +      │   │   ├──constraint_1_name
> +      │   │   ├──constraint_1_power_limit_uw
> +      │   │   ├──constraint_1_time_window_us
> +      │   │   ├──device -> ../../intel-rapl:1
> +      │   │   ├──energy_uj
> +      │   │   ├──max_energy_range_uj
> +      │   │   ├──name
> +      │   │   ├──enabled
> +      │   │   ├──power
> +      │   │   │   ├──async
> +      │   │   │   []
> +      │   │   ├──subsystem -> ../../../../../../class/power_cap
> +      │   │   └──uevent
> +      │   ├──max_energy_range_uj
> +      │   ├──max_power_range_uw
> +      │   ├──name
> +      │   ├──enabled
> +      │   ├──power
> +      │   │   ├──async
> +      │   │   []
> +      │   ├──subsystem -> ../../../../../class/power_cap
> +      │   ├──uevent
> +      ├──power
> +      │   ├──async
> +      │   []
> +      ├──subsystem -> ../../../../class/power_cap
> +      ├──enabled
> +      └──uevent
> +
> +The above example illustrates a case in which the Intel RAPL technology,
> +available in Intel® IA-64 and IA-32 Processor Architectures, is used. There is one
> +control type called intel-rapl which contains two power zones, intel-rapl:0 and
> +intel-rapl:1, representing CPU packages.  Each of these power zones contains
> +two subzones, intel-rapl:j:0 and intel-rapl:j:1 (j = 0, 1), representing the
> +"core" and the "uncore" parts of the given CPU package, respectively.  All of
> +the zones and subzones contain energy monitoring attributes (energy_uj,
> +max_energy_range_uj) and constraint attributes (constraint_*) allowing controls
> +to be applied (the constraints in the 'package' power zones apply to the whole
> +CPU packages and the subzone constraints only apply to the respective parts of
> +the given package individually). Since Intel RAPL doesn't provide instantaneous
> +power value, there is no power_uw attribute.
> +
> +In addition to that, each power zone contains a name attribute, allowing the
> +part of the system represented by that zone to be identified.
> +For example::
> +
> +	cat /sys/class/power_cap/intel-rapl/intel-rapl:0/name
> +
> +package-0
> +---------
> +
> +The Intel RAPL technology allows two constraints, short term and long term,
> +with two different time windows to be applied to each power zone.  Thus for
> +each zone there are 2 attributes representing the constraint names, 2 power
> +limits and 2 attributes representing the sizes of the time windows. Such that,
> +constraint_j_* attributes correspond to the jth constraint (j = 0,1).
> +
> +For example::
> +
> +	constraint_0_name
> +	constraint_0_power_limit_uw
> +	constraint_0_time_window_us
> +	constraint_1_name
> +	constraint_1_power_limit_uw
> +	constraint_1_time_window_us
> +
> +Power Zone Attributes
> +=====================
> +
> +Monitoring attributes
> +---------------------
> +
> +energy_uj (rw)
> +	Current energy counter in micro joules. Write "0" to reset.
> +	If the counter can not be reset, then this attribute is read only.
> +
> +max_energy_range_uj (ro)
> +	Range of the above energy counter in micro-joules.
> +
> +power_uw (ro)
> +	Current power in micro watts.
> +
> +max_power_range_uw (ro)
> +	Range of the above power value in micro-watts.
> +
> +name (ro)
> +	Name of this power zone.
> +
> +It is possible that some domains have both power ranges and energy counter ranges;
> +however, only one is mandatory.
> +
> +Constraints
> +-----------
> +
> +constraint_X_power_limit_uw (rw)
> +	Power limit in micro watts, which should be applicable for the
> +	time window specified by "constraint_X_time_window_us".
> +
> +constraint_X_time_window_us (rw)
> +	Time window in micro seconds.
> +
> +constraint_X_name (ro)
> +	An optional name of the constraint
> +
> +constraint_X_max_power_uw(ro)
> +	Maximum allowed power in micro watts.
> +
> +constraint_X_min_power_uw(ro)
> +	Minimum allowed power in micro watts.
> +
> +constraint_X_max_time_window_us(ro)
> +	Maximum allowed time window in micro seconds.
> +
> +constraint_X_min_time_window_us(ro)
> +	Minimum allowed time window in micro seconds.
> +
> +Except power_limit_uw and time_window_us other fields are optional.
> +
> +Common zone and control type attributes
> +---------------------------------------
> +
> +enabled (rw): Enable/Disable controls at zone level or for all zones using
> +a control type.
> +
> +Power Cap Client Driver Interface
> +=================================
> +
> +The API summary:
> +
> +Call powercap_register_control_type() to register control type object.
> +Call powercap_register_zone() to register a power zone (under a given
> +control type), either as a top-level power zone or as a subzone of another
> +power zone registered earlier.
> +The number of constraints in a power zone and the corresponding callbacks have
> +to be defined prior to calling powercap_register_zone() to register that zone.
> +
> +To Free a power zone call powercap_unregister_zone().
> +To free a control type object call powercap_unregister_control_type().
> +Detailed API can be generated using kernel-doc on include/linux/powercap.h.
> diff --git a/Documentation/power/powercap/powercap.txt b/Documentation/power/powercap/powercap.txt
> deleted file mode 100644
> index 1e6ef164e07a..000000000000
> --- a/Documentation/power/powercap/powercap.txt
> +++ /dev/null
> @@ -1,236 +0,0 @@
> -Power Capping Framework
> -==================================
> -
> -The power capping framework provides a consistent interface between the kernel
> -and the user space that allows power capping drivers to expose the settings to
> -user space in a uniform way.
> -
> -Terminology
> -=========================
> -The framework exposes power capping devices to user space via sysfs in the
> -form of a tree of objects. The objects at the root level of the tree represent
> -'control types', which correspond to different methods of power capping.  For
> -example, the intel-rapl control type represents the Intel "Running Average
> -Power Limit" (RAPL) technology, whereas the 'idle-injection' control type
> -corresponds to the use of idle injection for controlling power.
> -
> -Power zones represent different parts of the system, which can be controlled and
> -monitored using the power capping method determined by the control type the
> -given zone belongs to. They each contain attributes for monitoring power, as
> -well as controls represented in the form of power constraints.  If the parts of
> -the system represented by different power zones are hierarchical (that is, one
> -bigger part consists of multiple smaller parts that each have their own power
> -controls), those power zones may also be organized in a hierarchy with one
> -parent power zone containing multiple subzones and so on to reflect the power
> -control topology of the system.  In that case, it is possible to apply power
> -capping to a set of devices together using the parent power zone and if more
> -fine grained control is required, it can be applied through the subzones.
> -
> -
> -Example sysfs interface tree:
> -
> -/sys/devices/virtual/powercap
> -??? intel-rapl
> -    ??? intel-rapl:0
> -    ?   ??? constraint_0_name
> -    ?   ??? constraint_0_power_limit_uw
> -    ?   ??? constraint_0_time_window_us
> -    ?   ??? constraint_1_name
> -    ?   ??? constraint_1_power_limit_uw
> -    ?   ??? constraint_1_time_window_us
> -    ?   ??? device -> ../../intel-rapl
> -    ?   ??? energy_uj
> -    ?   ??? intel-rapl:0:0
> -    ?   ?   ??? constraint_0_name
> -    ?   ?   ??? constraint_0_power_limit_uw
> -    ?   ?   ??? constraint_0_time_window_us
> -    ?   ?   ??? constraint_1_name
> -    ?   ?   ??? constraint_1_power_limit_uw
> -    ?   ?   ??? constraint_1_time_window_us
> -    ?   ?   ??? device -> ../../intel-rapl:0
> -    ?   ?   ??? energy_uj
> -    ?   ?   ??? max_energy_range_uj
> -    ?   ?   ??? name
> -    ?   ?   ??? enabled
> -    ?   ?   ??? power
> -    ?   ?   ?   ??? async
> -    ?   ?   ?   []
> -    ?   ?   ??? subsystem -> ../../../../../../class/power_cap
> -    ?   ?   ??? uevent
> -    ?   ??? intel-rapl:0:1
> -    ?   ?   ??? constraint_0_name
> -    ?   ?   ??? constraint_0_power_limit_uw
> -    ?   ?   ??? constraint_0_time_window_us
> -    ?   ?   ??? constraint_1_name
> -    ?   ?   ??? constraint_1_power_limit_uw
> -    ?   ?   ??? constraint_1_time_window_us
> -    ?   ?   ??? device -> ../../intel-rapl:0
> -    ?   ?   ??? energy_uj
> -    ?   ?   ??? max_energy_range_uj
> -    ?   ?   ??? name
> -    ?   ?   ??? enabled
> -    ?   ?   ??? power
> -    ?   ?   ?   ??? async
> -    ?   ?   ?   []
> -    ?   ?   ??? subsystem -> ../../../../../../class/power_cap
> -    ?   ?   ??? uevent
> -    ?   ??? max_energy_range_uj
> -    ?   ??? max_power_range_uw
> -    ?   ??? name
> -    ?   ??? enabled
> -    ?   ??? power
> -    ?   ?   ??? async
> -    ?   ?   []
> -    ?   ??? subsystem -> ../../../../../class/power_cap
> -    ?   ??? enabled
> -    ?   ??? uevent
> -    ??? intel-rapl:1
> -    ?   ??? constraint_0_name
> -    ?   ??? constraint_0_power_limit_uw
> -    ?   ??? constraint_0_time_window_us
> -    ?   ??? constraint_1_name
> -    ?   ??? constraint_1_power_limit_uw
> -    ?   ??? constraint_1_time_window_us
> -    ?   ??? device -> ../../intel-rapl
> -    ?   ??? energy_uj
> -    ?   ??? intel-rapl:1:0
> -    ?   ?   ??? constraint_0_name
> -    ?   ?   ??? constraint_0_power_limit_uw
> -    ?   ?   ??? constraint_0_time_window_us
> -    ?   ?   ??? constraint_1_name
> -    ?   ?   ??? constraint_1_power_limit_uw
> -    ?   ?   ??? constraint_1_time_window_us
> -    ?   ?   ??? device -> ../../intel-rapl:1
> -    ?   ?   ??? energy_uj
> -    ?   ?   ??? max_energy_range_uj
> -    ?   ?   ??? name
> -    ?   ?   ??? enabled
> -    ?   ?   ??? power
> -    ?   ?   ?   ??? async
> -    ?   ?   ?   []
> -    ?   ?   ??? subsystem -> ../../../../../../class/power_cap
> -    ?   ?   ??? uevent
> -    ?   ??? intel-rapl:1:1
> -    ?   ?   ??? constraint_0_name
> -    ?   ?   ??? constraint_0_power_limit_uw
> -    ?   ?   ??? constraint_0_time_window_us
> -    ?   ?   ??? constraint_1_name
> -    ?   ?   ??? constraint_1_power_limit_uw
> -    ?   ?   ??? constraint_1_time_window_us
> -    ?   ?   ??? device -> ../../intel-rapl:1
> -    ?   ?   ??? energy_uj
> -    ?   ?   ??? max_energy_range_uj
> -    ?   ?   ??? name
> -    ?   ?   ??? enabled
> -    ?   ?   ??? power
> -    ?   ?   ?   ??? async
> -    ?   ?   ?   []
> -    ?   ?   ??? subsystem -> ../../../../../../class/power_cap
> -    ?   ?   ??? uevent
> -    ?   ??? max_energy_range_uj
> -    ?   ??? max_power_range_uw
> -    ?   ??? name
> -    ?   ??? enabled
> -    ?   ??? power
> -    ?   ?   ??? async
> -    ?   ?   []
> -    ?   ??? subsystem -> ../../../../../class/power_cap
> -    ?   ??? uevent
> -    ??? power
> -    ?   ??? async
> -    ?   []
> -    ??? subsystem -> ../../../../class/power_cap
> -    ??? enabled
> -    ??? uevent
> -
> -The above example illustrates a case in which the Intel RAPL technology,
> -available in Intel® IA-64 and IA-32 Processor Architectures, is used. There is one
> -control type called intel-rapl which contains two power zones, intel-rapl:0 and
> -intel-rapl:1, representing CPU packages.  Each of these power zones contains
> -two subzones, intel-rapl:j:0 and intel-rapl:j:1 (j = 0, 1), representing the
> -"core" and the "uncore" parts of the given CPU package, respectively.  All of
> -the zones and subzones contain energy monitoring attributes (energy_uj,
> -max_energy_range_uj) and constraint attributes (constraint_*) allowing controls
> -to be applied (the constraints in the 'package' power zones apply to the whole
> -CPU packages and the subzone constraints only apply to the respective parts of
> -the given package individually). Since Intel RAPL doesn't provide instantaneous
> -power value, there is no power_uw attribute.
> -
> -In addition to that, each power zone contains a name attribute, allowing the
> -part of the system represented by that zone to be identified.
> -For example:
> -
> -cat /sys/class/power_cap/intel-rapl/intel-rapl:0/name
> -package-0
> -
> -The Intel RAPL technology allows two constraints, short term and long term,
> -with two different time windows to be applied to each power zone.  Thus for
> -each zone there are 2 attributes representing the constraint names, 2 power
> -limits and 2 attributes representing the sizes of the time windows. Such that,
> -constraint_j_* attributes correspond to the jth constraint (j = 0,1).
> -
> -For example:
> -	constraint_0_name
> -	constraint_0_power_limit_uw
> -	constraint_0_time_window_us
> -	constraint_1_name
> -	constraint_1_power_limit_uw
> -	constraint_1_time_window_us
> -
> -Power Zone Attributes
> -=================================
> -Monitoring attributes
> -----------------------
> -
> -energy_uj (rw): Current energy counter in micro joules. Write "0" to reset.
> -If the counter can not be reset, then this attribute is read only.
> -
> -max_energy_range_uj (ro): Range of the above energy counter in micro-joules.
> -
> -power_uw (ro): Current power in micro watts.
> -
> -max_power_range_uw (ro): Range of the above power value in micro-watts.
> -
> -name (ro): Name of this power zone.
> -
> -It is possible that some domains have both power ranges and energy counter ranges;
> -however, only one is mandatory.
> -
> -Constraints
> -----------------
> -constraint_X_power_limit_uw (rw): Power limit in micro watts, which should be
> -applicable for the time window specified by "constraint_X_time_window_us".
> -
> -constraint_X_time_window_us (rw): Time window in micro seconds.
> -
> -constraint_X_name (ro): An optional name of the constraint
> -
> -constraint_X_max_power_uw(ro): Maximum allowed power in micro watts.
> -
> -constraint_X_min_power_uw(ro): Minimum allowed power in micro watts.
> -
> -constraint_X_max_time_window_us(ro): Maximum allowed time window in micro seconds.
> -
> -constraint_X_min_time_window_us(ro): Minimum allowed time window in micro seconds.
> -
> -Except power_limit_uw and time_window_us other fields are optional.
> -
> -Common zone and control type attributes
> -----------------------------------------
> -enabled (rw): Enable/Disable controls at zone level or for all zones using
> -a control type.
> -
> -Power Cap Client Driver Interface
> -==================================
> -The API summary:
> -
> -Call powercap_register_control_type() to register control type object.
> -Call powercap_register_zone() to register a power zone (under a given
> -control type), either as a top-level power zone or as a subzone of another
> -power zone registered earlier.
> -The number of constraints in a power zone and the corresponding callbacks have
> -to be defined prior to calling powercap_register_zone() to register that zone.
> -
> -To Free a power zone call powercap_unregister_zone().
> -To free a control type object call powercap_unregister_control_type().
> -Detailed API can be generated using kernel-doc on include/linux/powercap.h.
> diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.rst
> similarity index 61%
> rename from Documentation/power/regulator/consumer.txt
> rename to Documentation/power/regulator/consumer.rst
> index e51564c1a140..0cd8cc1275a7 100644
> --- a/Documentation/power/regulator/consumer.txt
> +++ b/Documentation/power/regulator/consumer.rst
> @@ -1,3 +1,4 @@
> +===================================
>  Regulator Consumer Driver Interface
>  ===================================
>  
> @@ -8,73 +9,77 @@ Please see overview.txt for a description of the terms used in this text.
>  1. Consumer Regulator Access (static & dynamic drivers)
>  =======================================================
>  
> -A consumer driver can get access to its supply regulator by calling :-
> +A consumer driver can get access to its supply regulator by calling ::
>  
> -regulator = regulator_get(dev, "Vcc");
> +	regulator = regulator_get(dev, "Vcc");
>  
>  The consumer passes in its struct device pointer and power supply ID. The core
>  then finds the correct regulator by consulting a machine specific lookup table.
>  If the lookup is successful then this call will return a pointer to the struct
>  regulator that supplies this consumer.
>  
> -To release the regulator the consumer driver should call :-
> +To release the regulator the consumer driver should call ::
>  
> -regulator_put(regulator);
> +	regulator_put(regulator);
>  
>  Consumers can be supplied by more than one regulator e.g. codec consumer with
> -analog and digital supplies :-
> +analog and digital supplies ::
>  
> -digital = regulator_get(dev, "Vcc");  /* digital core */
> -analog = regulator_get(dev, "Avdd");  /* analog */
> +	digital = regulator_get(dev, "Vcc");  /* digital core */
> +	analog = regulator_get(dev, "Avdd");  /* analog */
>  
>  The regulator access functions regulator_get() and regulator_put() will
>  usually be called in your device drivers probe() and remove() respectively.
>  
>  
>  2. Regulator Output Enable & Disable (static & dynamic drivers)
> -====================================================================
> +===============================================================
>  
> -A consumer can enable its power supply by calling:-
>  
> -int regulator_enable(regulator);
> +A consumer can enable its power supply by calling::
>  
> -NOTE: The supply may already be enabled before regulator_enabled() is called.
> -This may happen if the consumer shares the regulator or the regulator has been
> -previously enabled by bootloader or kernel board initialization code.
> +	int regulator_enable(regulator);
>  
> -A consumer can determine if a regulator is enabled by calling :-
> +NOTE:
> +  The supply may already be enabled before regulator_enabled() is called.
> +  This may happen if the consumer shares the regulator or the regulator has been
> +  previously enabled by bootloader or kernel board initialization code.
>  
> -int regulator_is_enabled(regulator);
> +A consumer can determine if a regulator is enabled by calling::
> +
> +	int regulator_is_enabled(regulator);
>  
>  This will return > zero when the regulator is enabled.
>  
>  
> -A consumer can disable its supply when no longer needed by calling :-
> +A consumer can disable its supply when no longer needed by calling::
>  
> -int regulator_disable(regulator);
> +	int regulator_disable(regulator);
>  
> -NOTE: This may not disable the supply if it's shared with other consumers. The
> -regulator will only be disabled when the enabled reference count is zero.
> +NOTE:
> +  This may not disable the supply if it's shared with other consumers. The
> +  regulator will only be disabled when the enabled reference count is zero.
>  
> -Finally, a regulator can be forcefully disabled in the case of an emergency :-
> +Finally, a regulator can be forcefully disabled in the case of an emergency::
>  
> -int regulator_force_disable(regulator);
> +	int regulator_force_disable(regulator);
>  
> -NOTE: this will immediately and forcefully shutdown the regulator output. All
> -consumers will be powered off.
> +NOTE:
> +  this will immediately and forcefully shutdown the regulator output. All
> +  consumers will be powered off.
>  
>  
>  3. Regulator Voltage Control & Status (dynamic drivers)
> -======================================================
> +=======================================================
>  
>  Some consumer drivers need to be able to dynamically change their supply
>  voltage to match system operating points. e.g. CPUfreq drivers can scale
>  voltage along with frequency to save power, SD drivers may need to select the
>  correct card voltage, etc.
>  
> -Consumers can control their supply voltage by calling :-
> +Consumers can control their supply voltage by calling::
>  
> -int regulator_set_voltage(regulator, min_uV, max_uV);
> +	int regulator_set_voltage(regulator, min_uV, max_uV);
>  
>  Where min_uV and max_uV are the minimum and maximum acceptable voltages in
>  microvolts.
> @@ -84,47 +89,50 @@ when enabled, then the voltage changes instantly, otherwise the voltage
>  configuration changes and the voltage is physically set when the regulator is
>  next enabled.
>  
> -The regulators configured voltage output can be found by calling :-
> +The regulators configured voltage output can be found by calling::
>  
> -int regulator_get_voltage(regulator);
> +	int regulator_get_voltage(regulator);
>  
> -NOTE: get_voltage() will return the configured output voltage whether the
> -regulator is enabled or disabled and should NOT be used to determine regulator
> -output state. However this can be used in conjunction with is_enabled() to
> -determine the regulator physical output voltage.
> +NOTE:
> +  get_voltage() will return the configured output voltage whether the
> +  regulator is enabled or disabled and should NOT be used to determine regulator
> +  output state. However this can be used in conjunction with is_enabled() to
> +  determine the regulator physical output voltage.
>  
>  
>  4. Regulator Current Limit Control & Status (dynamic drivers)
> -===========================================================
> +=============================================================
>  
>  Some consumer drivers need to be able to dynamically change their supply
>  current limit to match system operating points. e.g. LCD backlight driver can
>  change the current limit to vary the backlight brightness, USB drivers may want
>  to set the limit to 500mA when supplying power.
>  
> -Consumers can control their supply current limit by calling :-
> +Consumers can control their supply current limit by calling::
>  
> -int regulator_set_current_limit(regulator, min_uA, max_uA);
> +	int regulator_set_current_limit(regulator, min_uA, max_uA);
>  
>  Where min_uA and max_uA are the minimum and maximum acceptable current limit in
>  microamps.
>  
> -NOTE: this can be called when the regulator is enabled or disabled. If called
> -when enabled, then the current limit changes instantly, otherwise the current
> -limit configuration changes and the current limit is physically set when the
> -regulator is next enabled.
> +NOTE:
> +  this can be called when the regulator is enabled or disabled. If called
> +  when enabled, then the current limit changes instantly, otherwise the current
> +  limit configuration changes and the current limit is physically set when the
> +  regulator is next enabled.
>  
> -A regulators current limit can be found by calling :-
> +A regulators current limit can be found by calling::
>  
> -int regulator_get_current_limit(regulator);
> +	int regulator_get_current_limit(regulator);
>  
> -NOTE: get_current_limit() will return the current limit whether the regulator
> -is enabled or disabled and should not be used to determine regulator current
> -load.
> +NOTE:
> +  get_current_limit() will return the current limit whether the regulator
> +  is enabled or disabled and should not be used to determine regulator current
> +  load.
>  
>  
>  5. Regulator Operating Mode Control & Status (dynamic drivers)
> -=============================================================
> +==============================================================
>  
>  Some consumers can further save system power by changing the operating mode of
>  their supply regulator to be more efficient when the consumers operating state
> @@ -135,9 +143,9 @@ Regulator operating mode can be changed indirectly or directly.
>  Indirect operating mode control.
>  --------------------------------
>  Consumer drivers can request a change in their supply regulator operating mode
> -by calling :-
> +by calling::
>  
> -int regulator_set_load(struct regulator *regulator, int load_uA);
> +	int regulator_set_load(struct regulator *regulator, int load_uA);
>  
>  This will cause the core to recalculate the total load on the regulator (based
>  on all its consumers) and change operating mode (if necessary and permitted)
> @@ -153,12 +161,13 @@ consumers.
>  
>  Direct operating mode control.
>  ------------------------------
> +
>  Bespoke or tightly coupled drivers may want to directly control regulator
>  operating mode depending on their operating point. This can be achieved by
> -calling :-
> +calling::
>  
> -int regulator_set_mode(struct regulator *regulator, unsigned int mode);
> -unsigned int regulator_get_mode(struct regulator *regulator);
> +	int regulator_set_mode(struct regulator *regulator, unsigned int mode);
> +	unsigned int regulator_get_mode(struct regulator *regulator);
>  
>  Direct mode will only be used by consumers that *know* about the regulator and
>  are not sharing the regulator with other consumers.
> @@ -166,24 +175,26 @@ are not sharing the regulator with other consumers.
>  
>  6. Regulator Events
>  ===================
> +
>  Regulators can notify consumers of external events. Events could be received by
>  consumers under regulator stress or failure conditions.
>  
> -Consumers can register interest in regulator events by calling :-
> +Consumers can register interest in regulator events by calling::
>  
> -int regulator_register_notifier(struct regulator *regulator,
> -			      struct notifier_block *nb);
> +	int regulator_register_notifier(struct regulator *regulator,
> +					struct notifier_block *nb);
>  
> -Consumers can unregister interest by calling :-
> +Consumers can unregister interest by calling::
>  
> -int regulator_unregister_notifier(struct regulator *regulator,
> -				struct notifier_block *nb);
> +	int regulator_unregister_notifier(struct regulator *regulator,
> +					  struct notifier_block *nb);
>  
>  Regulators use the kernel notifier framework to send event to their interested
>  consumers.
>  
>  7. Regulator Direct Register Access
>  ===================================
> +
>  Some kinds of power management hardware or firmware are designed such that
>  they need to do low-level hardware access to regulators, with no involvement
>  from the kernel. Examples of such devices are:
> @@ -199,20 +210,20 @@ to it. The regulator framework provides the following helpers for querying
>  these details.
>  
>  Bus-specific details, like I2C addresses or transfer rates are handled by the
> -regmap framework. To get the regulator's regmap (if supported), use :-
> +regmap framework. To get the regulator's regmap (if supported), use::
>  
> -struct regmap *regulator_get_regmap(struct regulator *regulator);
> +	struct regmap *regulator_get_regmap(struct regulator *regulator);
>  
>  To obtain the hardware register offset and bitmask for the regulator's voltage
> -selector register, use :-
> +selector register, use::
>  
> -int regulator_get_hardware_vsel_register(struct regulator *regulator,
> -					 unsigned *vsel_reg,
> -					 unsigned *vsel_mask);
> +	int regulator_get_hardware_vsel_register(struct regulator *regulator,
> +						 unsigned *vsel_reg,
> +						 unsigned *vsel_mask);
>  
>  To convert a regulator framework voltage selector code (used by
>  regulator_list_voltage) to a hardware-specific voltage selector that can be
> -directly written to the voltage selector register, use :-
> +directly written to the voltage selector register, use::
>  
> -int regulator_list_hardware_vsel(struct regulator *regulator,
> -				 unsigned selector);
> +	int regulator_list_hardware_vsel(struct regulator *regulator,
> +					 unsigned selector);
> diff --git a/Documentation/power/regulator/design.txt b/Documentation/power/regulator/design.rst
> similarity index 86%
> rename from Documentation/power/regulator/design.txt
> rename to Documentation/power/regulator/design.rst
> index fdd919b96830..3b09c6841dc4 100644
> --- a/Documentation/power/regulator/design.txt
> +++ b/Documentation/power/regulator/design.rst
> @@ -1,3 +1,4 @@
> +==========================
>  Regulator API design notes
>  ==========================
>  
> @@ -14,7 +15,9 @@ Safety
>     have different power requirements, and not all components with power
>     requirements are visible to software.
>  
> -  => The API should make no changes to the hardware state unless it has
> +.. note::
> +
> +     The API should make no changes to the hardware state unless it has
>       specific knowledge that these changes are safe to perform on this
>       particular system.
>  
> @@ -28,6 +31,8 @@ Consumer use cases
>   - Many of the power supplies in the system will be shared between many
>     different consumers.
>  
> -  => The consumer API should be structured so that these use cases are
> +.. note::
> +
> +     The consumer API should be structured so that these use cases are
>       very easy to handle and so that consumers will work with shared
>       supplies without any additional effort.
> diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.rst
> similarity index 75%
> rename from Documentation/power/regulator/machine.txt
> rename to Documentation/power/regulator/machine.rst
> index eff4dcaaa252..22fffefaa3ad 100644
> --- a/Documentation/power/regulator/machine.txt
> +++ b/Documentation/power/regulator/machine.rst
> @@ -1,10 +1,11 @@
> +==================================
>  Regulator Machine Driver Interface
> -===================================
> +==================================
>  
>  The regulator machine driver interface is intended for board/machine specific
>  initialisation code to configure the regulator subsystem.
>  
> -Consider the following machine :-
> +Consider the following machine::
>  
>    Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V]
>                 |
> @@ -13,31 +14,31 @@ Consider the following machine :-
>  The drivers for consumers A & B must be mapped to the correct regulator in
>  order to control their power supplies. This mapping can be achieved in machine
>  initialisation code by creating a struct regulator_consumer_supply for
> -each regulator.
> +each regulator::
>  
> -struct regulator_consumer_supply {
> +  struct regulator_consumer_supply {
>  	const char *dev_name;	/* consumer dev_name() */
>  	const char *supply;	/* consumer supply - e.g. "vcc" */
> -};
> +  };
>  
> -e.g. for the machine above
> +e.g. for the machine above::
>  
> -static struct regulator_consumer_supply regulator1_consumers[] = {
> +  static struct regulator_consumer_supply regulator1_consumers[] = {
>  	REGULATOR_SUPPLY("Vcc", "consumer B"),
> -};
> +  };
>  
> -static struct regulator_consumer_supply regulator2_consumers[] = {
> +  static struct regulator_consumer_supply regulator2_consumers[] = {
>  	REGULATOR_SUPPLY("Vcc", "consumer A"),
> -};
> +  };
>  
>  This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2
>  to the 'Vcc' supply for Consumer A.
>  
>  Constraints can now be registered by defining a struct regulator_init_data
>  for each regulator power domain. This structure also maps the consumers
> -to their supply regulators :-
> +to their supply regulators::
>  
> -static struct regulator_init_data regulator1_data = {
> +  static struct regulator_init_data regulator1_data = {
>  	.constraints = {
>  		.name = "Regulator-1",
>  		.min_uV = 3300000,
> @@ -46,7 +47,7 @@ static struct regulator_init_data regulator1_data = {
>  	},
>  	.num_consumer_supplies = ARRAY_SIZE(regulator1_consumers),
>  	.consumer_supplies = regulator1_consumers,
> -};
> +  };
>  
>  The name field should be set to something that is usefully descriptive
>  for the board for configuration of supplies for other regulators and
> @@ -57,9 +58,9 @@ name is provided then the subsystem will choose one.
>  Regulator-1 supplies power to Regulator-2. This relationship must be registered
>  with the core so that Regulator-1 is also enabled when Consumer A enables its
>  supply (Regulator-2). The supply regulator is set by the supply_regulator
> -field below and co:-
> +field below and co::
>  
> -static struct regulator_init_data regulator2_data = {
> +  static struct regulator_init_data regulator2_data = {
>  	.supply_regulator = "Regulator-1",
>  	.constraints = {
>  		.min_uV = 1800000,
> @@ -69,11 +70,11 @@ static struct regulator_init_data regulator2_data = {
>  	},
>  	.num_consumer_supplies = ARRAY_SIZE(regulator2_consumers),
>  	.consumer_supplies = regulator2_consumers,
> -};
> +  };
>  
> -Finally the regulator devices must be registered in the usual manner.
> +Finally the regulator devices must be registered in the usual manner::
>  
> -static struct platform_device regulator_devices[] = {
> +  static struct platform_device regulator_devices[] = {
>  	{
>  		.name = "regulator",
>  		.id = DCDC_1,
> @@ -88,9 +89,9 @@ static struct platform_device regulator_devices[] = {
>  			.platform_data = &regulator2_data,
>  		},
>  	},
> -};
> -/* register regulator 1 device */
> -platform_device_register(&regulator_devices[0]);
> +  };
> +  /* register regulator 1 device */
> +  platform_device_register(&regulator_devices[0]);
>  
> -/* register regulator 2 device */
> -platform_device_register(&regulator_devices[1]);
> +  /* register regulator 2 device */
> +  platform_device_register(&regulator_devices[1]);
> diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.rst
> similarity index 79%
> rename from Documentation/power/regulator/overview.txt
> rename to Documentation/power/regulator/overview.rst
> index 721b4739ec32..ee494c70a7c4 100644
> --- a/Documentation/power/regulator/overview.txt
> +++ b/Documentation/power/regulator/overview.rst
> @@ -1,3 +1,4 @@
> +=============================================
>  Linux voltage and current regulator framework
>  =============================================
>  
> @@ -13,26 +14,30 @@ regulators (where voltage output is controllable) and current sinks (where
>  current limit is controllable).
>  
>  (C) 2008  Wolfson Microelectronics PLC.
> +
>  Author: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
>  
>  
>  Nomenclature
>  ============
>  
> -Some terms used in this document:-
> +Some terms used in this document:
>  
> -  o Regulator    - Electronic device that supplies power to other devices.
> +  - Regulator
> +                 - Electronic device that supplies power to other devices.
>                     Most regulators can enable and disable their output while
>                     some can control their output voltage and or current.
>  
>                     Input Voltage -> Regulator -> Output Voltage
>  
>  
> -  o PMIC         - Power Management IC. An IC that contains numerous regulators
> -                   and often contains other subsystems.
> +  - PMIC
> +                 - Power Management IC. An IC that contains numerous
> +                   regulators and often contains other subsystems.
>  
>  
> -  o Consumer     - Electronic device that is supplied power by a regulator.
> +  - Consumer
> +                 - Electronic device that is supplied power by a regulator.
>                     Consumers can be classified into two types:-
>  
>                     Static: consumer does not change its supply voltage or
> @@ -44,46 +49,48 @@ Some terms used in this document:-
>                     current limit to meet operation demands.
>  
>  
> -  o Power Domain - Electronic circuit that is supplied its input power by the
> +  - Power Domain
> +                 - Electronic circuit that is supplied its input power by the
>                     output power of a regulator, switch or by another power
>                     domain.
>  
> -                   The supply regulator may be behind a switch(s). i.e.
> +                   The supply regulator may be behind a switch(s). i.e.::
>  
> -                   Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A]
> -                              |             |
> -                              |             +-> [Consumer B], [Consumer C]
> -                              |
> -                              +-> [Consumer D], [Consumer E]
> +                     Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A]
> +                                |             |
> +                                |             +-> [Consumer B], [Consumer C]
> +                                |
> +                                +-> [Consumer D], [Consumer E]
>  
>                     That is one regulator and three power domains:
>  
> -                   Domain 1: Switch-1, Consumers D & E.
> -                   Domain 2: Switch-2, Consumers B & C.
> -                   Domain 3: Consumer A.
> +                   - Domain 1: Switch-1, Consumers D & E.
> +                   - Domain 2: Switch-2, Consumers B & C.
> +                   - Domain 3: Consumer A.
>  
>                     and this represents a "supplies" relationship:
>  
>                     Domain-1 --> Domain-2 --> Domain-3.
>  
>                     A power domain may have regulators that are supplied power
> -                   by other regulators. i.e.
> +                   by other regulators. i.e.::
>  
> -                   Regulator-1 -+-> Regulator-2 -+-> [Consumer A]
> -                                |
> -                                +-> [Consumer B]
> +                     Regulator-1 -+-> Regulator-2 -+-> [Consumer A]
> +                                  |
> +                                  +-> [Consumer B]
>  
>                     This gives us two regulators and two power domains:
>  
> -                   Domain 1: Regulator-2, Consumer B.
> -                   Domain 2: Consumer A.
> +                   - Domain 1: Regulator-2, Consumer B.
> +                   - Domain 2: Consumer A.
>  
>                     and a "supplies" relationship:
>  
>                     Domain-1 --> Domain-2
>  
>  
> -  o Constraints  - Constraints are used to define power levels for performance
> +  - Constraints
> +                 - Constraints are used to define power levels for performance
>                     and hardware protection. Constraints exist at three levels:
>  
>                     Regulator Level: This is defined by the regulator hardware
> @@ -141,7 +148,7 @@ relevant to non SoC devices and is split into the following four interfaces:-
>        limit. This also compiles out if not in use so drivers can be reused in
>        systems with no regulator based power control.
>  
> -        See Documentation/power/regulator/consumer.txt
> +        See Documentation/power/regulator/consumer.rst
>  
>     2. Regulator driver interface.
>  
> @@ -149,7 +156,7 @@ relevant to non SoC devices and is split into the following four interfaces:-
>        operations to the core. It also has a notifier call chain for propagating
>        regulator events to clients.
>  
> -        See Documentation/power/regulator/regulator.txt
> +        See Documentation/power/regulator/regulator.rst
>  
>     3. Machine interface.
>  
> @@ -160,7 +167,7 @@ relevant to non SoC devices and is split into the following four interfaces:-
>        allows the creation of a regulator tree whereby some regulators are
>        supplied by others (similar to a clock tree).
>  
> -        See Documentation/power/regulator/machine.txt
> +        See Documentation/power/regulator/machine.rst
>  
>     4. Userspace ABI.
>  
> diff --git a/Documentation/power/regulator/regulator.rst b/Documentation/power/regulator/regulator.rst
> new file mode 100644
> index 000000000000..794b3256fbb9
> --- /dev/null
> +++ b/Documentation/power/regulator/regulator.rst
> @@ -0,0 +1,32 @@
> +==========================
> +Regulator Driver Interface
> +==========================
> +
> +The regulator driver interface is relatively simple and designed to allow
> +regulator drivers to register their services with the core framework.
> +
> +
> +Registration
> +============
> +
> +Drivers can register a regulator by calling::
> +
> +  struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
> +					   const struct regulator_config *config);
> +
> +This will register the regulator's capabilities and operations to the regulator
> +core.
> +
> +Regulators can be unregistered by calling::
> +
> +  void regulator_unregister(struct regulator_dev *rdev);
> +
> +
> +Regulator Events
> +================
> +
> +Regulators can send events (e.g. overtemperature, undervoltage, etc) to
> +consumer drivers by calling::
> +
> +  int regulator_notifier_call_chain(struct regulator_dev *rdev,
> +				    unsigned long event, void *data);
> diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt
> deleted file mode 100644
> index b17e5833ce21..000000000000
> --- a/Documentation/power/regulator/regulator.txt
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -Regulator Driver Interface
> -==========================
> -
> -The regulator driver interface is relatively simple and designed to allow
> -regulator drivers to register their services with the core framework.
> -
> -
> -Registration
> -============
> -
> -Drivers can register a regulator by calling :-
> -
> -struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
> -					 const struct regulator_config *config);
> -
> -This will register the regulator's capabilities and operations to the regulator
> -core.
> -
> -Regulators can be unregistered by calling :-
> -
> -void regulator_unregister(struct regulator_dev *rdev);
> -
> -
> -Regulator Events
> -================
> -Regulators can send events (e.g. overtemperature, undervoltage, etc) to
> -consumer drivers by calling :-
> -
> -int regulator_notifier_call_chain(struct regulator_dev *rdev,
> -				  unsigned long event, void *data);
> diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.rst
> similarity index 89%
> rename from Documentation/power/runtime_pm.txt
> rename to Documentation/power/runtime_pm.rst
> index 937e33c46211..2c2ec99b5088 100644
> --- a/Documentation/power/runtime_pm.txt
> +++ b/Documentation/power/runtime_pm.rst
> @@ -1,10 +1,15 @@
> +==================================================
>  Runtime Power Management Framework for I/O Devices
> +==================================================
>  
>  (C) 2009-2011 Rafael J. Wysocki <rjw@xxxxxxx>, Novell Inc.
> +
>  (C) 2010 Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> +
>  (C) 2014 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
>  
>  1. Introduction
> +===============
>  
>  Support for runtime power management (runtime PM) of I/O devices is provided
>  at the power management core (PM core) level by means of:
> @@ -33,16 +38,17 @@ fields of 'struct dev_pm_info' and the core helper functions provided for
>  runtime PM are described below.
>  
>  2. Device Runtime PM Callbacks
> +==============================
>  
> -There are three device runtime PM callbacks defined in 'struct dev_pm_ops':
> +There are three device runtime PM callbacks defined in 'struct dev_pm_ops'::
>  
> -struct dev_pm_ops {
> +  struct dev_pm_ops {
>  	...
>  	int (*runtime_suspend)(struct device *dev);
>  	int (*runtime_resume)(struct device *dev);
>  	int (*runtime_idle)(struct device *dev);
>  	...
> -};
> +  };
>  
>  The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks
>  are executed by the PM core for the device's subsystem that may be either of
> @@ -112,7 +118,7 @@ low-power state during the execution of the suspend callback, it is expected
>  that remote wakeup will be enabled for the device.  Generally, remote wakeup
>  should be enabled for all input devices put into low-power states at run time.
>  
> -The subsystem-level resume callback, if present, is _entirely_ _responsible_ for
> +The subsystem-level resume callback, if present, is **entirely responsible** for
>  handling the resume of the device as appropriate, which may, but need not
>  include executing the device driver's own ->runtime_resume() callback (from the
>  PM core's point of view it is not necessary to implement a ->runtime_resume()
> @@ -197,95 +203,96 @@ rules:
>      except for scheduled autosuspends.
>  
>  3. Runtime PM Device Fields
> +===========================
>  
>  The following device runtime PM fields are present in 'struct dev_pm_info', as
>  defined in include/linux/pm.h:
>  
> -  struct timer_list suspend_timer;
> +  `struct timer_list suspend_timer;`
>      - timer used for scheduling (delayed) suspend and autosuspend requests
>  
> -  unsigned long timer_expires;
> +  `unsigned long timer_expires;`
>      - timer expiration time, in jiffies (if this is different from zero, the
>        timer is running and will expire at that time, otherwise the timer is not
>        running)
>  
> -  struct work_struct work;
> +  `struct work_struct work;`
>      - work structure used for queuing up requests (i.e. work items in pm_wq)
>  
> -  wait_queue_head_t wait_queue;
> +  `wait_queue_head_t wait_queue;`
>      - wait queue used if any of the helper functions needs to wait for another
>        one to complete
>  
> -  spinlock_t lock;
> +  `spinlock_t lock;`
>      - lock used for synchronization
>  
> -  atomic_t usage_count;
> +  `atomic_t usage_count;`
>      - the usage counter of the device
>  
> -  atomic_t child_count;
> +  `atomic_t child_count;`
>      - the count of 'active' children of the device
>  
> -  unsigned int ignore_children;
> +  `unsigned int ignore_children;`
>      - if set, the value of child_count is ignored (but still updated)
>  
> -  unsigned int disable_depth;
> +  `unsigned int disable_depth;`
>      - used for disabling the helper functions (they work normally if this is
>        equal to zero); the initial value of it is 1 (i.e. runtime PM is
>        initially disabled for all devices)
>  
> -  int runtime_error;
> +  `int runtime_error;`
>      - if set, there was a fatal error (one of the callbacks returned error code
>        as described in Section 2), so the helper functions will not work until
>        this flag is cleared; this is the error code returned by the failing
>        callback
>  
> -  unsigned int idle_notification;
> +  `unsigned int idle_notification;`
>      - if set, ->runtime_idle() is being executed
>  
> -  unsigned int request_pending;
> +  `unsigned int request_pending;`
>      - if set, there's a pending request (i.e. a work item queued up into pm_wq)
>  
> -  enum rpm_request request;
> +  `enum rpm_request request;`
>      - type of request that's pending (valid if request_pending is set)
>  
> -  unsigned int deferred_resume;
> +  `unsigned int deferred_resume;`
>      - set if ->runtime_resume() is about to be run while ->runtime_suspend() is
>        being executed for that device and it is not practical to wait for the
>        suspend to complete; means "start a resume as soon as you've suspended"
>  
> -  enum rpm_status runtime_status;
> +  `enum rpm_status runtime_status;`
>      - the runtime PM status of the device; this field's initial value is
>        RPM_SUSPENDED, which means that each device is initially regarded by the
>        PM core as 'suspended', regardless of its real hardware status
>  
> -  unsigned int runtime_auto;
> +  `unsigned int runtime_auto;`
>      - if set, indicates that the user space has allowed the device driver to
>        power manage the device at run time via the /sys/devices/.../power/control
> -      interface; it may only be modified with the help of the pm_runtime_allow()
> +      `interface;` it may only be modified with the help of the pm_runtime_allow()
>        and pm_runtime_forbid() helper functions
>  
> -  unsigned int no_callbacks;
> +  `unsigned int no_callbacks;`
>      - indicates that the device does not use the runtime PM callbacks (see
>        Section 8); it may be modified only by the pm_runtime_no_callbacks()
>        helper function
>  
> -  unsigned int irq_safe;
> +  `unsigned int irq_safe;`
>      - indicates that the ->runtime_suspend() and ->runtime_resume() callbacks
>        will be invoked with the spinlock held and interrupts disabled
>  
> -  unsigned int use_autosuspend;
> +  `unsigned int use_autosuspend;`
>      - indicates that the device's driver supports delayed autosuspend (see
>        Section 9); it may be modified only by the
>        pm_runtime{_dont}_use_autosuspend() helper functions
>  
> -  unsigned int timer_autosuspends;
> +  `unsigned int timer_autosuspends;`
>      - indicates that the PM core should attempt to carry out an autosuspend
>        when the timer expires rather than a normal suspend
>  
> -  int autosuspend_delay;
> +  `int autosuspend_delay;`
>      - the delay time (in milliseconds) to be used for autosuspend
>  
> -  unsigned long last_busy;
> +  `unsigned long last_busy;`
>      - the time (in jiffies) when the pm_runtime_mark_last_busy() helper
>        function was last called for this device; used in calculating inactivity
>        periods for autosuspend
> @@ -293,37 +300,38 @@ defined in include/linux/pm.h:
>  All of the above fields are members of the 'power' member of 'struct device'.
>  
>  4. Runtime PM Device Helper Functions
> +=====================================
>  
>  The following runtime PM helper functions are defined in
>  drivers/base/power/runtime.c and include/linux/pm_runtime.h:
>  
> -  void pm_runtime_init(struct device *dev);
> +  `void pm_runtime_init(struct device *dev);`
>      - initialize the device runtime PM fields in 'struct dev_pm_info'
>  
> -  void pm_runtime_remove(struct device *dev);
> +  `void pm_runtime_remove(struct device *dev);`
>      - make sure that the runtime PM of the device will be disabled after
>        removing the device from device hierarchy
>  
> -  int pm_runtime_idle(struct device *dev);
> +  `int pm_runtime_idle(struct device *dev);`
>      - execute the subsystem-level idle callback for the device; returns an
>        error code on failure, where -EINPROGRESS means that ->runtime_idle() is
>        already being executed; if there is no callback or the callback returns 0
>        then run pm_runtime_autosuspend(dev) and return its result
>  
> -  int pm_runtime_suspend(struct device *dev);
> +  `int pm_runtime_suspend(struct device *dev);`
>      - execute the subsystem-level suspend callback for the device; returns 0 on
>        success, 1 if the device's runtime PM status was already 'suspended', or
>        error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt
>        to suspend the device again in future and -EACCES means that
>        'power.disable_depth' is different from 0
>  
> -  int pm_runtime_autosuspend(struct device *dev);
> +  `int pm_runtime_autosuspend(struct device *dev);`
>      - same as pm_runtime_suspend() except that the autosuspend delay is taken
> -      into account; if pm_runtime_autosuspend_expiration() says the delay has
> +      `into account;` if pm_runtime_autosuspend_expiration() says the delay has
>        not yet expired then an autosuspend is scheduled for the appropriate time
>        and 0 is returned
>  
> -  int pm_runtime_resume(struct device *dev);
> +  `int pm_runtime_resume(struct device *dev);`
>      - execute the subsystem-level resume callback for the device; returns 0 on
>        success, 1 if the device's runtime PM status was already 'active' or
>        error code on failure, where -EAGAIN means it may be safe to attempt to
> @@ -331,17 +339,17 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
>        checked additionally, and -EACCES means that 'power.disable_depth' is
>        different from 0
>  
> -  int pm_request_idle(struct device *dev);
> +  `int pm_request_idle(struct device *dev);`
>      - submit a request to execute the subsystem-level idle callback for the
>        device (the request is represented by a work item in pm_wq); returns 0 on
>        success or error code if the request has not been queued up
>  
> -  int pm_request_autosuspend(struct device *dev);
> +  `int pm_request_autosuspend(struct device *dev);`
>      - schedule the execution of the subsystem-level suspend callback for the
>        device when the autosuspend delay has expired; if the delay has already
>        expired then the work item is queued up immediately
>  
> -  int pm_schedule_suspend(struct device *dev, unsigned int delay);
> +  `int pm_schedule_suspend(struct device *dev, unsigned int delay);`
>      - schedule the execution of the subsystem-level suspend callback for the
>        device in future, where 'delay' is the time to wait before queuing up a
>        suspend work item in pm_wq, in milliseconds (if 'delay' is zero, the work
> @@ -351,58 +359,58 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
>        ->runtime_suspend() is already scheduled and not yet expired, the new
>        value of 'delay' will be used as the time to wait
>  
> -  int pm_request_resume(struct device *dev);
> +  `int pm_request_resume(struct device *dev);`
>      - submit a request to execute the subsystem-level resume callback for the
>        device (the request is represented by a work item in pm_wq); returns 0 on
>        success, 1 if the device's runtime PM status was already 'active', or
>        error code if the request hasn't been queued up
>  
> -  void pm_runtime_get_noresume(struct device *dev);
> +  `void pm_runtime_get_noresume(struct device *dev);`
>      - increment the device's usage counter
>  
> -  int pm_runtime_get(struct device *dev);
> +  `int pm_runtime_get(struct device *dev);`
>      - increment the device's usage counter, run pm_request_resume(dev) and
>        return its result
>  
> -  int pm_runtime_get_sync(struct device *dev);
> +  `int pm_runtime_get_sync(struct device *dev);`
>      - increment the device's usage counter, run pm_runtime_resume(dev) and
>        return its result
>  
> -  int pm_runtime_get_if_in_use(struct device *dev);
> +  `int pm_runtime_get_if_in_use(struct device *dev);`
>      - return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the
>        runtime PM status is RPM_ACTIVE and the runtime PM usage counter is
>        nonzero, increment the counter and return 1; otherwise return 0 without
>        changing the counter
>  
> -  void pm_runtime_put_noidle(struct device *dev);
> +  `void pm_runtime_put_noidle(struct device *dev);`
>      - decrement the device's usage counter
>  
> -  int pm_runtime_put(struct device *dev);
> +  `int pm_runtime_put(struct device *dev);`
>      - decrement the device's usage counter; if the result is 0 then run
>        pm_request_idle(dev) and return its result
>  
> -  int pm_runtime_put_autosuspend(struct device *dev);
> +  `int pm_runtime_put_autosuspend(struct device *dev);`
>      - decrement the device's usage counter; if the result is 0 then run
>        pm_request_autosuspend(dev) and return its result
>  
> -  int pm_runtime_put_sync(struct device *dev);
> +  `int pm_runtime_put_sync(struct device *dev);`
>      - decrement the device's usage counter; if the result is 0 then run
>        pm_runtime_idle(dev) and return its result
>  
> -  int pm_runtime_put_sync_suspend(struct device *dev);
> +  `int pm_runtime_put_sync_suspend(struct device *dev);`
>      - decrement the device's usage counter; if the result is 0 then run
>        pm_runtime_suspend(dev) and return its result
>  
> -  int pm_runtime_put_sync_autosuspend(struct device *dev);
> +  `int pm_runtime_put_sync_autosuspend(struct device *dev);`
>      - decrement the device's usage counter; if the result is 0 then run
>        pm_runtime_autosuspend(dev) and return its result
>  
> -  void pm_runtime_enable(struct device *dev);
> +  `void pm_runtime_enable(struct device *dev);`
>      - decrement the device's 'power.disable_depth' field; if that field is equal
>        to zero, the runtime PM helper functions can execute subsystem-level
>        callbacks described in Section 2 for the device
>  
> -  int pm_runtime_disable(struct device *dev);
> +  `int pm_runtime_disable(struct device *dev);`
>      - increment the device's 'power.disable_depth' field (if the value of that
>        field was previously zero, this prevents subsystem-level runtime PM
>        callbacks from being run for the device), make sure that all of the
> @@ -411,7 +419,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
>        necessary to execute the subsystem-level resume callback for the device
>        to satisfy that request, otherwise 0 is returned
>  
> -  int pm_runtime_barrier(struct device *dev);
> +  `int pm_runtime_barrier(struct device *dev);`
>      - check if there's a resume request pending for the device and resume it
>        (synchronously) in that case, cancel any other pending runtime PM requests
>        regarding it and wait for all runtime PM operations on it in progress to
> @@ -419,10 +427,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
>        necessary to execute the subsystem-level resume callback for the device to
>        satisfy that request, otherwise 0 is returned
>  
> -  void pm_suspend_ignore_children(struct device *dev, bool enable);
> +  `void pm_suspend_ignore_children(struct device *dev, bool enable);`
>      - set/unset the power.ignore_children flag of the device
>  
> -  int pm_runtime_set_active(struct device *dev);
> +  `int pm_runtime_set_active(struct device *dev);`
>      - clear the device's 'power.runtime_error' flag, set the device's runtime
>        PM status to 'active' and update its parent's counter of 'active'
>        children as appropriate (it is only valid to use this function if
> @@ -430,61 +438,61 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
>        zero); it will fail and return error code if the device has a parent
>        which is not active and the 'power.ignore_children' flag of which is unset
>  
> -  void pm_runtime_set_suspended(struct device *dev);
> +  `void pm_runtime_set_suspended(struct device *dev);`
>      - clear the device's 'power.runtime_error' flag, set the device's runtime
>        PM status to 'suspended' and update its parent's counter of 'active'
>        children as appropriate (it is only valid to use this function if
>        'power.runtime_error' is set or 'power.disable_depth' is greater than
>        zero)
>  
> -  bool pm_runtime_active(struct device *dev);
> +  `bool pm_runtime_active(struct device *dev);`
>      - return true if the device's runtime PM status is 'active' or its
>        'power.disable_depth' field is not equal to zero, or false otherwise
>  
> -  bool pm_runtime_suspended(struct device *dev);
> +  `bool pm_runtime_suspended(struct device *dev);`
>      - return true if the device's runtime PM status is 'suspended' and its
>        'power.disable_depth' field is equal to zero, or false otherwise
>  
> -  bool pm_runtime_status_suspended(struct device *dev);
> +  `bool pm_runtime_status_suspended(struct device *dev);`
>      - return true if the device's runtime PM status is 'suspended'
>  
> -  void pm_runtime_allow(struct device *dev);
> +  `void pm_runtime_allow(struct device *dev);`
>      - set the power.runtime_auto flag for the device and decrease its usage
>        counter (used by the /sys/devices/.../power/control interface to
>        effectively allow the device to be power managed at run time)
>  
> -  void pm_runtime_forbid(struct device *dev);
> +  `void pm_runtime_forbid(struct device *dev);`
>      - unset the power.runtime_auto flag for the device and increase its usage
>        counter (used by the /sys/devices/.../power/control interface to
>        effectively prevent the device from being power managed at run time)
>  
> -  void pm_runtime_no_callbacks(struct device *dev);
> +  `void pm_runtime_no_callbacks(struct device *dev);`
>      - set the power.no_callbacks flag for the device and remove the runtime
>        PM attributes from /sys/devices/.../power (or prevent them from being
>        added when the device is registered)
>  
> -  void pm_runtime_irq_safe(struct device *dev);
> +  `void pm_runtime_irq_safe(struct device *dev);`
>      - set the power.irq_safe flag for the device, causing the runtime-PM
>        callbacks to be invoked with interrupts off
>  
> -  bool pm_runtime_is_irq_safe(struct device *dev);
> +  `bool pm_runtime_is_irq_safe(struct device *dev);`
>      - return true if power.irq_safe flag was set for the device, causing
>        the runtime-PM callbacks to be invoked with interrupts off
>  
> -  void pm_runtime_mark_last_busy(struct device *dev);
> +  `void pm_runtime_mark_last_busy(struct device *dev);`
>      - set the power.last_busy field to the current time
>  
> -  void pm_runtime_use_autosuspend(struct device *dev);
> +  `void pm_runtime_use_autosuspend(struct device *dev);`
>      - set the power.use_autosuspend flag, enabling autosuspend delays; call
>        pm_runtime_get_sync if the flag was previously cleared and
>        power.autosuspend_delay is negative
>  
> -  void pm_runtime_dont_use_autosuspend(struct device *dev);
> +  `void pm_runtime_dont_use_autosuspend(struct device *dev);`
>      - clear the power.use_autosuspend flag, disabling autosuspend delays;
>        decrement the device's usage counter if the flag was previously set and
>        power.autosuspend_delay is negative; call pm_runtime_idle
>  
> -  void pm_runtime_set_autosuspend_delay(struct device *dev, int delay);
> +  `void pm_runtime_set_autosuspend_delay(struct device *dev, int delay);`
>      - set the power.autosuspend_delay value to 'delay' (expressed in
>        milliseconds); if 'delay' is negative then runtime suspends are
>        prevented; if power.use_autosuspend is set, pm_runtime_get_sync may be
> @@ -493,7 +501,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
>        changed to or from a negative value; if power.use_autosuspend is clear,
>        pm_runtime_idle is called
>  
> -  unsigned long pm_runtime_autosuspend_expiration(struct device *dev);
> +  `unsigned long pm_runtime_autosuspend_expiration(struct device *dev);`
>      - calculate the time when the current autosuspend delay period will expire,
>        based on power.last_busy and power.autosuspend_delay; if the delay time
>        is 1000 ms or larger then the expiration time is rounded up to the
> @@ -503,36 +511,37 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
>  
>  It is safe to execute the following helper functions from interrupt context:
>  
> -pm_request_idle()
> -pm_request_autosuspend()
> -pm_schedule_suspend()
> -pm_request_resume()
> -pm_runtime_get_noresume()
> -pm_runtime_get()
> -pm_runtime_put_noidle()
> -pm_runtime_put()
> -pm_runtime_put_autosuspend()
> -pm_runtime_enable()
> -pm_suspend_ignore_children()
> -pm_runtime_set_active()
> -pm_runtime_set_suspended()
> -pm_runtime_suspended()
> -pm_runtime_mark_last_busy()
> -pm_runtime_autosuspend_expiration()
> +- pm_request_idle()
> +- pm_request_autosuspend()
> +- pm_schedule_suspend()
> +- pm_request_resume()
> +- pm_runtime_get_noresume()
> +- pm_runtime_get()
> +- pm_runtime_put_noidle()
> +- pm_runtime_put()
> +- pm_runtime_put_autosuspend()
> +- pm_runtime_enable()
> +- pm_suspend_ignore_children()
> +- pm_runtime_set_active()
> +- pm_runtime_set_suspended()
> +- pm_runtime_suspended()
> +- pm_runtime_mark_last_busy()
> +- pm_runtime_autosuspend_expiration()
>  
>  If pm_runtime_irq_safe() has been called for a device then the following helper
>  functions may also be used in interrupt context:
>  
> -pm_runtime_idle()
> -pm_runtime_suspend()
> -pm_runtime_autosuspend()
> -pm_runtime_resume()
> -pm_runtime_get_sync()
> -pm_runtime_put_sync()
> -pm_runtime_put_sync_suspend()
> -pm_runtime_put_sync_autosuspend()
> +- pm_runtime_idle()
> +- pm_runtime_suspend()
> +- pm_runtime_autosuspend()
> +- pm_runtime_resume()
> +- pm_runtime_get_sync()
> +- pm_runtime_put_sync()
> +- pm_runtime_put_sync_suspend()
> +- pm_runtime_put_sync_autosuspend()
>  
>  5. Runtime PM Initialization, Device Probing and Removal
> +========================================================
>  
>  Initially, the runtime PM is disabled for all devices, which means that the
>  majority of the runtime PM helper functions described in Section 4 will return
> @@ -608,6 +617,7 @@ manage the device at run time, the driver may confuse it by using
>  pm_runtime_forbid() this way.
>  
>  6. Runtime PM and System Sleep
> +==============================
>  
>  Runtime PM and system sleep (i.e., system suspend and hibernation, also known
>  as suspend-to-RAM and suspend-to-disk) interact with each other in a couple of
> @@ -647,9 +657,9 @@ brought back to full power during resume, then its runtime PM status will have
>  to be updated to reflect the actual post-system sleep status.  The way to do
>  this is:
>  
> -	pm_runtime_disable(dev);
> -	pm_runtime_set_active(dev);
> -	pm_runtime_enable(dev);
> +	 - pm_runtime_disable(dev);
> +	 - pm_runtime_set_active(dev);
> +	 - pm_runtime_enable(dev);
>  
>  The PM core always increments the runtime usage counter before calling the
>  ->suspend() callback and decrements it after calling the ->resume() callback.
> @@ -705,66 +715,66 @@ Subsystems may wish to conserve code space by using the set of generic power
>  management callbacks provided by the PM core, defined in
>  driver/base/power/generic_ops.c:
>  
> -  int pm_generic_runtime_suspend(struct device *dev);
> +  `int pm_generic_runtime_suspend(struct device *dev);`
>      - invoke the ->runtime_suspend() callback provided by the driver of this
>        device and return its result, or return 0 if not defined
>  
> -  int pm_generic_runtime_resume(struct device *dev);
> +  `int pm_generic_runtime_resume(struct device *dev);`
>      - invoke the ->runtime_resume() callback provided by the driver of this
>        device and return its result, or return 0 if not defined
>  
> -  int pm_generic_suspend(struct device *dev);
> +  `int pm_generic_suspend(struct device *dev);`
>      - if the device has not been suspended at run time, invoke the ->suspend()
>        callback provided by its driver and return its result, or return 0 if not
>        defined
>  
> -  int pm_generic_suspend_noirq(struct device *dev);
> +  `int pm_generic_suspend_noirq(struct device *dev);`
>      - if pm_runtime_suspended(dev) returns "false", invoke the ->suspend_noirq()
>        callback provided by the device's driver and return its result, or return
>        0 if not defined
>  
> -  int pm_generic_resume(struct device *dev);
> +  `int pm_generic_resume(struct device *dev);`
>      - invoke the ->resume() callback provided by the driver of this device and,
>        if successful, change the device's runtime PM status to 'active'
>  
> -  int pm_generic_resume_noirq(struct device *dev);
> +  `int pm_generic_resume_noirq(struct device *dev);`
>      - invoke the ->resume_noirq() callback provided by the driver of this device
>  
> -  int pm_generic_freeze(struct device *dev);
> +  `int pm_generic_freeze(struct device *dev);`
>      - if the device has not been suspended at run time, invoke the ->freeze()
>        callback provided by its driver and return its result, or return 0 if not
>        defined
>  
> -  int pm_generic_freeze_noirq(struct device *dev);
> +  `int pm_generic_freeze_noirq(struct device *dev);`
>      - if pm_runtime_suspended(dev) returns "false", invoke the ->freeze_noirq()
>        callback provided by the device's driver and return its result, or return
>        0 if not defined
>  
> -  int pm_generic_thaw(struct device *dev);
> +  `int pm_generic_thaw(struct device *dev);`
>      - if the device has not been suspended at run time, invoke the ->thaw()
>        callback provided by its driver and return its result, or return 0 if not
>        defined
>  
> -  int pm_generic_thaw_noirq(struct device *dev);
> +  `int pm_generic_thaw_noirq(struct device *dev);`
>      - if pm_runtime_suspended(dev) returns "false", invoke the ->thaw_noirq()
>        callback provided by the device's driver and return its result, or return
>        0 if not defined
>  
> -  int pm_generic_poweroff(struct device *dev);
> +  `int pm_generic_poweroff(struct device *dev);`
>      - if the device has not been suspended at run time, invoke the ->poweroff()
>        callback provided by its driver and return its result, or return 0 if not
>        defined
>  
> -  int pm_generic_poweroff_noirq(struct device *dev);
> +  `int pm_generic_poweroff_noirq(struct device *dev);`
>      - if pm_runtime_suspended(dev) returns "false", run the ->poweroff_noirq()
>        callback provided by the device's driver and return its result, or return
>        0 if not defined
>  
> -  int pm_generic_restore(struct device *dev);
> +  `int pm_generic_restore(struct device *dev);`
>      - invoke the ->restore() callback provided by the driver of this device and,
>        if successful, change the device's runtime PM status to 'active'
>  
> -  int pm_generic_restore_noirq(struct device *dev);
> +  `int pm_generic_restore_noirq(struct device *dev);`
>      - invoke the ->restore_noirq() callback provided by the device's driver
>  
>  These functions are the defaults used by the PM core, if a subsystem doesn't
> @@ -781,6 +791,7 @@ UNIVERSAL_DEV_PM_OPS macro defined in include/linux/pm.h (possibly setting its
>  last argument to NULL).
>  
>  8. "No-Callback" Devices
> +========================
>  
>  Some "devices" are only logical sub-devices of their parent and cannot be
>  power-managed on their own.  (The prototype example is a USB interface.  Entire
> @@ -807,6 +818,7 @@ parent must take responsibility for telling the device's driver when the
>  parent's power state changes.
>  
>  9. Autosuspend, or automatically-delayed suspends
> +=================================================
>  
>  Changing a device's power state isn't free; it requires both time and energy.
>  A device should be put in a low-power state only when there's some reason to
> @@ -832,8 +844,8 @@ registration the length should be controlled by user space, using the
>  
>  In order to use autosuspend, subsystems or drivers must call
>  pm_runtime_use_autosuspend() (preferably before registering the device), and
> -thereafter they should use the various *_autosuspend() helper functions instead
> -of the non-autosuspend counterparts:
> +thereafter they should use the various `*_autosuspend()` helper functions
> +instead of the non-autosuspend counterparts::
>  
>  	Instead of: pm_runtime_suspend    use: pm_runtime_autosuspend;
>  	Instead of: pm_schedule_suspend   use: pm_request_autosuspend;
> @@ -858,7 +870,7 @@ The implementation is well suited for asynchronous use in interrupt contexts.
>  However such use inevitably involves races, because the PM core can't
>  synchronize ->runtime_suspend() callbacks with the arrival of I/O requests.
>  This synchronization must be handled by the driver, using its private lock.
> -Here is a schematic pseudo-code example:
> +Here is a schematic pseudo-code example::
>  
>  	foo_read_or_write(struct foo_priv *foo, void *data)
>  	{
> diff --git a/Documentation/power/s2ram.txt b/Documentation/power/s2ram.rst
> similarity index 92%
> rename from Documentation/power/s2ram.txt
> rename to Documentation/power/s2ram.rst
> index 4685aee197fd..d739aa7c742c 100644
> --- a/Documentation/power/s2ram.txt
> +++ b/Documentation/power/s2ram.rst
> @@ -1,7 +1,9 @@
> -			How to get s2ram working
> -			~~~~~~~~~~~~~~~~~~~~~~~~
> -			2006 Linus Torvalds
> -			2006 Pavel Machek
> +========================
> +How to get s2ram working
> +========================
> +
> +2006 Linus Torvalds
> +2006 Pavel Machek
>  
>  1) Check suspend.sf.net, program s2ram there has long whitelist of
>     "known ok" machines, along with tricks to use on each one.
> @@ -12,8 +14,8 @@
>  
>  3) You can use Linus' TRACE_RESUME infrastructure, described below.
>  
> -		      Using TRACE_RESUME
> -		      ~~~~~~~~~~~~~~~~~~
> +Using TRACE_RESUME
> +~~~~~~~~~~~~~~~~~~
>  
>  I've been working at making the machines I have able to STR, and almost
>  always it's a driver that is buggy. Thank God for the suspend/resume
> @@ -27,7 +29,7 @@ machine that doesn't boot) is:
>  
>   - enable PM_DEBUG, and PM_TRACE
>  
> - - use a script like this:
> + - use a script like this::
>  
>  	#!/bin/sh
>  	sync
> @@ -38,7 +40,7 @@ machine that doesn't boot) is:
>  
>   - if it doesn't come back up (which is usually the problem), reboot by
>     holding the power button down, and look at the dmesg output for things
> -   like
> +   like::
>  
>  	Magic number: 4:156:725
>  	hash matches drivers/base/power/resume.c:28
> @@ -52,7 +54,7 @@ machine that doesn't boot) is:
>     If no device matches the hash (or any matches appear to be false positives),
>     the culprit may be a device from a loadable kernel module that is not loaded
>     until after the hash is checked. You can check the hash against the current
> -   devices again after more modules are loaded using sysfs:
> +   devices again after more modules are loaded using sysfs::
>  
>  	cat /sys/power/pm_trace_dev_match
>  
> diff --git a/Documentation/power/suspend-and-cpuhotplug.txt b/Documentation/power/suspend-and-cpuhotplug.rst
> similarity index 90%
> rename from Documentation/power/suspend-and-cpuhotplug.txt
> rename to Documentation/power/suspend-and-cpuhotplug.rst
> index a8751b8df10e..9df664f5423a 100644
> --- a/Documentation/power/suspend-and-cpuhotplug.txt
> +++ b/Documentation/power/suspend-and-cpuhotplug.rst
> @@ -1,10 +1,15 @@
> +====================================================================
>  Interaction of Suspend code (S3) with the CPU hotplug infrastructure
> +====================================================================
>  
> -     (C) 2011 - 2014 Srivatsa S. Bhat <srivatsa.bhat@xxxxxxxxxxxxxxxxxx>
> +(C) 2011 - 2014 Srivatsa S. Bhat <srivatsa.bhat@xxxxxxxxxxxxxxxxxx>
>  
>  
> -I. How does the regular CPU hotplug code differ from how the Suspend-to-RAM
> -   infrastructure uses it internally? And where do they share common code?
> +I. Differences between CPU hotplug and Suspend-to-RAM
> +======================================================
> +
> +How does the regular CPU hotplug code differ from how the Suspend-to-RAM
> +infrastructure uses it internally? And where do they share common code?
>  
>  Well, a picture is worth a thousand words... So ASCII art follows :-)
>  
> @@ -16,13 +21,13 @@ of describing where they take different paths and where they share code.
>  What happens when regular CPU hotplug and Suspend-to-RAM race with each other
>  is not depicted here.]
>  
> -On a high level, the suspend-resume cycle goes like this:
> +On a high level, the suspend-resume cycle goes like this::
>  
> -|Freeze| -> |Disable nonboot| -> |Do suspend| -> |Enable nonboot| -> |Thaw |
> -|tasks |    |     cpus      |    |          |    |     cpus     |    |tasks|
> +  |Freeze| -> |Disable nonboot| -> |Do suspend| -> |Enable nonboot| -> |Thaw |
> +  |tasks |    |     cpus      |    |          |    |     cpus     |    |tasks|
>  
>  
> -More details follow:
> +More details follow::
>  
>                                  Suspend call path
>                                  -----------------
> @@ -87,7 +92,9 @@ More details follow:
>  
>  Resuming back is likewise, with the counterparts being (in the order of
>  execution during resume):
> -* enable_nonboot_cpus() which involves:
> +
> +* enable_nonboot_cpus() which involves::
> +
>     |  Acquire cpu_add_remove_lock
>     |  Decrease cpu_hotplug_disabled, thereby enabling regular cpu hotplug
>     |  Call _cpu_up() [for all those cpus in the frozen_cpus mask, in a loop]
> @@ -101,7 +108,7 @@ execution during resume):
>  
>  It is to be noted here that the system_transition_mutex lock is acquired at the very
>  beginning, when we are just starting out to suspend, and then released only
> -after the entire cycle is complete (i.e., suspend + resume).
> +after the entire cycle is complete (i.e., suspend + resume)::
>  
>  
>  
> @@ -152,16 +159,16 @@ with the 'tasks_frozen' argument set to 1.
>  
>  
>  Important files and functions/entry points:
> -------------------------------------------
> +-------------------------------------------
>  
> -kernel/power/process.c : freeze_processes(), thaw_processes()
> -kernel/power/suspend.c : suspend_prepare(), suspend_enter(), suspend_finish()
> -kernel/cpu.c: cpu_[up|down](), _cpu_[up|down](), [disable|enable]_nonboot_cpus()
> +- kernel/power/process.c : freeze_processes(), thaw_processes()
> +- kernel/power/suspend.c : suspend_prepare(), suspend_enter(), suspend_finish()
> +- kernel/cpu.c: cpu_[up|down](), _cpu_[up|down](), [disable|enable]_nonboot_cpus()
>  
>  
>  
>  II. What are the issues involved in CPU hotplug?
> -    -------------------------------------------
> +------------------------------------------------
>  
>  There are some interesting situations involving CPU hotplug and microcode
>  update on the CPUs, as discussed below:
> @@ -243,8 +250,11 @@ d. Handling microcode update during suspend/hibernate:
>     cycles).
>  
>  
> -III. Are there any known problems when regular CPU hotplug and suspend race
> -     with each other?
> +III. Known problems
> +===================
> +
> +Are there any known problems when regular CPU hotplug and suspend race
> +with each other?
>  
>  Yes, they are listed below:
>  
> diff --git a/Documentation/power/suspend-and-interrupts.txt b/Documentation/power/suspend-and-interrupts.rst
> similarity index 98%
> rename from Documentation/power/suspend-and-interrupts.txt
> rename to Documentation/power/suspend-and-interrupts.rst
> index 8afb29a8604a..4cda6617709a 100644
> --- a/Documentation/power/suspend-and-interrupts.txt
> +++ b/Documentation/power/suspend-and-interrupts.rst
> @@ -1,4 +1,6 @@
> +====================================
>  System Suspend and Device Interrupts
> +====================================
>  
>  Copyright (C) 2014 Intel Corp.
>  Author: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> diff --git a/Documentation/power/swsusp-and-swap-files.txt b/Documentation/power/swsusp-and-swap-files.rst
> similarity index 83%
> rename from Documentation/power/swsusp-and-swap-files.txt
> rename to Documentation/power/swsusp-and-swap-files.rst
> index f281886de490..a33a2919dbe4 100644
> --- a/Documentation/power/swsusp-and-swap-files.txt
> +++ b/Documentation/power/swsusp-and-swap-files.rst
> @@ -1,4 +1,7 @@
> +===============================================
>  Using swap files with software suspend (swsusp)
> +===============================================
> +
>  	(C) 2006 Rafael J. Wysocki <rjw@xxxxxxx>
>  
>  The Linux kernel handles swap files almost in the same way as it handles swap
> @@ -21,20 +24,20 @@ units.
>  
>  In order to use a swap file with swsusp, you need to:
>  
> -1) Create the swap file and make it active, eg.
> +1) Create the swap file and make it active, eg.::
>  
> -# dd if=/dev/zero of=<swap_file_path> bs=1024 count=<swap_file_size_in_k>
> -# mkswap <swap_file_path>
> -# swapon <swap_file_path>
> +    # dd if=/dev/zero of=<swap_file_path> bs=1024 count=<swap_file_size_in_k>
> +    # mkswap <swap_file_path>
> +    # swapon <swap_file_path>
>  
>  2) Use an application that will bmap the swap file with the help of the
>  FIBMAP ioctl and determine the location of the file's swap header, as the
>  offset, in <PAGE_SIZE> units, from the beginning of the partition which
>  holds the swap file.
>  
> -3) Add the following parameters to the kernel command line:
> +3) Add the following parameters to the kernel command line::
>  
> -resume=<swap_file_partition> resume_offset=<swap_file_offset>
> +    resume=<swap_file_partition> resume_offset=<swap_file_offset>
>  
>  where <swap_file_partition> is the partition on which the swap file is located
>  and <swap_file_offset> is the offset of the swap header determined by the
> @@ -46,7 +49,7 @@ OR
>  
>  Use a userland suspend application that will set the partition and offset
>  with the help of the SNAPSHOT_SET_SWAP_AREA ioctl described in
> -Documentation/power/userland-swsusp.txt (this is the only method to suspend
> +Documentation/power/userland-swsusp.rst (this is the only method to suspend
>  to a swap file allowing the resume to be initiated from an initrd or initramfs
>  image).
>  
> diff --git a/Documentation/power/swsusp-dmcrypt.txt b/Documentation/power/swsusp-dmcrypt.rst
> similarity index 67%
> rename from Documentation/power/swsusp-dmcrypt.txt
> rename to Documentation/power/swsusp-dmcrypt.rst
> index b802fbfd95ef..426df59172cd 100644
> --- a/Documentation/power/swsusp-dmcrypt.txt
> +++ b/Documentation/power/swsusp-dmcrypt.rst
> @@ -1,13 +1,15 @@
> +=======================================
> +How to use dm-crypt and swsusp together
> +=======================================
> +
>  Author: Andreas Steinmetz <ast@xxxxxxxx>
>  
>  
> -How to use dm-crypt and swsusp together:
> -========================================
>  
>  Some prerequisites:
>  You know how dm-crypt works. If not, visit the following web page:
>  http://www.saout.de/misc/dm-crypt/
> -You have read Documentation/power/swsusp.txt and understand it.
> +You have read Documentation/power/swsusp.rst and understand it.
>  You did read Documentation/admin-guide/initrd.rst and know how an initrd works.
>  You know how to create or how to modify an initrd.
>  
> @@ -29,23 +31,23 @@ a way that the swap device you suspend to/resume from has
>  always the same major/minor within the initrd as well as
>  within your running system. The easiest way to achieve this is
>  to always set up this swap device first with dmsetup, so that
> -it will always look like the following:
> +it will always look like the following::
>  
> -brw-------  1 root root 254, 0 Jul 28 13:37 /dev/mapper/swap0
> +  brw-------  1 root root 254, 0 Jul 28 13:37 /dev/mapper/swap0
>  
>  Now set up your kernel to use /dev/mapper/swap0 as the default
> -resume partition, so your kernel .config contains:
> +resume partition, so your kernel .config contains::
>  
> -CONFIG_PM_STD_PARTITION="/dev/mapper/swap0"
> +  CONFIG_PM_STD_PARTITION="/dev/mapper/swap0"
>  
>  Prepare your boot loader to use the initrd you will create or
>  modify. For lilo the simplest setup looks like the following
> -lines:
> +lines::
>  
> -image=/boot/vmlinuz
> -initrd=/boot/initrd.gz
> -label=linux
> -append="root=/dev/ram0 init=/linuxrc rw"
> +  image=/boot/vmlinuz
> +  initrd=/boot/initrd.gz
> +  label=linux
> +  append="root=/dev/ram0 init=/linuxrc rw"
>  
>  Finally you need to create or modify your initrd. Lets assume
>  you create an initrd that reads the required dm-crypt setup
> @@ -53,66 +55,66 @@ from a pcmcia flash disk card. The card is formatted with an ext2
>  fs which resides on /dev/hde1 when the card is inserted. The
>  card contains at least the encrypted swap setup in a file
>  named "swapkey". /etc/fstab of your initrd contains something
> -like the following:
> +like the following::
>  
> -/dev/hda1   /mnt    ext3      ro                            0 0
> -none        /proc   proc      defaults,noatime,nodiratime   0 0
> -none        /sys    sysfs     defaults,noatime,nodiratime   0 0
> +  /dev/hda1   /mnt    ext3      ro                            0 0
> +  none        /proc   proc      defaults,noatime,nodiratime   0 0
> +  none        /sys    sysfs     defaults,noatime,nodiratime   0 0
>  
>  /dev/hda1 contains an unencrypted mini system that sets up all
>  of your crypto devices, again by reading the setup from the
>  pcmcia flash disk. What follows now is a /linuxrc for your
>  initrd that allows you to resume from encrypted swap and that
>  continues boot with your mini system on /dev/hda1 if resume
> -does not happen:
> +does not happen::
>  
> -#!/bin/sh
> -PATH=/sbin:/bin:/usr/sbin:/usr/bin
> -mount /proc
> -mount /sys
> -mapped=0
> -noresume=`grep -c noresume /proc/cmdline`
> -if [ "$*" != "" ]
> -then
> -  noresume=1
> -fi
> -dmesg -n 1
> -/sbin/cardmgr -q
> -for i in 1 2 3 4 5 6 7 8 9 0
> -do
> -  if [ -f /proc/ide/hde/media ]
> +  #!/bin/sh
> +  PATH=/sbin:/bin:/usr/sbin:/usr/bin
> +  mount /proc
> +  mount /sys
> +  mapped=0
> +  noresume=`grep -c noresume /proc/cmdline`
> +  if [ "$*" != "" ]
>    then
> +    noresume=1
> +  fi
> +  dmesg -n 1
> +  /sbin/cardmgr -q
> +  for i in 1 2 3 4 5 6 7 8 9 0
> +  do
> +    if [ -f /proc/ide/hde/media ]
> +    then
> +      usleep 500000
> +      mount -t ext2 -o ro /dev/hde1 /mnt
> +      if [ -f /mnt/swapkey ]
> +      then
> +        dmsetup create swap0 /mnt/swapkey > /dev/null 2>&1 && mapped=1
> +      fi
> +      umount /mnt
> +      break
> +    fi
>      usleep 500000
> -    mount -t ext2 -o ro /dev/hde1 /mnt
> -    if [ -f /mnt/swapkey ]
> +  done
> +  killproc /sbin/cardmgr
> +  dmesg -n 6
> +  if [ $mapped = 1 ]
> +  then
> +    if [ $noresume != 0 ]
>      then
> -      dmsetup create swap0 /mnt/swapkey > /dev/null 2>&1 && mapped=1
> +      mkswap /dev/mapper/swap0 > /dev/null 2>&1
>      fi
> -    umount /mnt
> -    break
> +    echo 254:0 > /sys/power/resume
> +    dmsetup remove swap0
>    fi
> -  usleep 500000
> -done
> -killproc /sbin/cardmgr
> -dmesg -n 6
> -if [ $mapped = 1 ]
> -then
> -  if [ $noresume != 0 ]
> -  then
> -    mkswap /dev/mapper/swap0 > /dev/null 2>&1
> -  fi
> -  echo 254:0 > /sys/power/resume
> -  dmsetup remove swap0
> -fi
> -umount /sys
> -mount /mnt
> -umount /proc
> -cd /mnt
> -pivot_root . mnt
> -mount /proc
> -umount -l /mnt
> -umount /proc
> -exec chroot . /sbin/init $* < dev/console > dev/console 2>&1
> +  umount /sys
> +  mount /mnt
> +  umount /proc
> +  cd /mnt
> +  pivot_root . mnt
> +  mount /proc
> +  umount -l /mnt
> +  umount /proc
> +  exec chroot . /sbin/init $* < dev/console > dev/console 2>&1
>  
>  Please don't mind the weird loop above, busybox's msh doesn't know
>  the let statement. Now, what is happening in the script?
> diff --git a/Documentation/power/swsusp.rst b/Documentation/power/swsusp.rst
> new file mode 100644
> index 000000000000..d000312f6965
> --- /dev/null
> +++ b/Documentation/power/swsusp.rst
> @@ -0,0 +1,501 @@
> +============
> +Swap suspend
> +============
> +
> +Some warnings, first.
> +
> +.. warning::
> +
> +   **BIG FAT WARNING**
> +
> +   If you touch anything on disk between suspend and resume...
> +				...kiss your data goodbye.
> +
> +   If you do resume from initrd after your filesystems are mounted...
> +				...bye bye root partition.
> +
> +			[this is actually same case as above]
> +
> +   If you have unsupported ( ) devices using DMA, you may have some
> +   problems. If your disk driver does not support suspend... (IDE does),
> +   it may cause some problems, too. If you change kernel command line
> +   between suspend and resume, it may do something wrong. If you change
> +   your hardware while system is suspended... well, it was not good idea;
> +   but it will probably only crash.
> +
> +   ( ) suspend/resume support is needed to make it safe.
> +
> +   If you have any filesystems on USB devices mounted before software suspend,
> +   they won't be accessible after resume and you may lose data, as though
> +   you have unplugged the USB devices with mounted filesystems on them;
> +   see the FAQ below for details.  (This is not true for more traditional
> +   power states like "standby", which normally don't turn USB off.)
> +
> +Swap partition:
> +  You need to append resume=/dev/your_swap_partition to kernel command
> +  line or specify it using /sys/power/resume.
> +
> +Swap file:
> +  If using a swapfile you can also specify a resume offset using
> +  resume_offset=<number> on the kernel command line or specify it
> +  in /sys/power/resume_offset.
> +
> +After preparing then you suspend by::
> +
> +	echo shutdown > /sys/power/disk; echo disk > /sys/power/state
> +
> +- If you feel ACPI works pretty well on your system, you might try::
> +
> +	echo platform > /sys/power/disk; echo disk > /sys/power/state
> +
> +- If you would like to write hibernation image to swap and then suspend
> +  to RAM (provided your platform supports it), you can try::
> +
> +	echo suspend > /sys/power/disk; echo disk > /sys/power/state
> +
> +- If you have SATA disks, you'll need recent kernels with SATA suspend
> +  support. For suspend and resume to work, make sure your disk drivers
> +  are built into kernel -- not modules. [There's way to make
> +  suspend/resume with modular disk drivers, see FAQ, but you probably
> +  should not do that.]
> +
> +If you want to limit the suspend image size to N bytes, do::
> +
> +	echo N > /sys/power/image_size
> +
> +before suspend (it is limited to around 2/5 of available RAM by default).
> +
> +- The resume process checks for the presence of the resume device,
> +  if found, it then checks the contents for the hibernation image signature.
> +  If both are found, it resumes the hibernation image.
> +
> +- The resume process may be triggered in two ways:
> +
> +  1) During lateinit:  If resume=/dev/your_swap_partition is specified on
> +     the kernel command line, lateinit runs the resume process.  If the
> +     resume device has not been probed yet, the resume process fails and
> +     bootup continues.
> +  2) Manually from an initrd or initramfs:  May be run from
> +     the init script by using the /sys/power/resume file.  It is vital
> +     that this be done prior to remounting any filesystems (even as
> +     read-only) otherwise data may be corrupted.
> +
> +Article about goals and implementation of Software Suspend for Linux
> +====================================================================
> +
> +Author: Gábor Kuti
> +Last revised: 2003-10-20 by Pavel Machek
> +
> +Idea and goals to achieve
> +-------------------------
> +
> +Nowadays it is common in several laptops that they have a suspend button. It
> +saves the state of the machine to a filesystem or to a partition and switches
> +to standby mode. Later resuming the machine the saved state is loaded back to
> +ram and the machine can continue its work. It has two real benefits. First we
> +save ourselves the time machine goes down and later boots up, energy costs
> +are real high when running from batteries. The other gain is that we don't have
> +to interrupt our programs so processes that are calculating something for a long
> +time shouldn't need to be written interruptible.
> +
> +swsusp saves the state of the machine into active swaps and then reboots or
> +powerdowns.  You must explicitly specify the swap partition to resume from with
> +`resume=` kernel option. If signature is found it loads and restores saved
> +state. If the option `noresume` is specified as a boot parameter, it skips
> +the resuming.  If the option `hibernate=nocompress` is specified as a boot
> +parameter, it saves hibernation image without compression.
> +
> +In the meantime while the system is suspended you should not add/remove any
> +of the hardware, write to the filesystems, etc.
> +
> +Sleep states summary
> +====================
> +
> +There are three different interfaces you can use, /proc/acpi should
> +work like this:
> +
> +In a really perfect world::
> +
> +  echo 1 > /proc/acpi/sleep       # for standby
> +  echo 2 > /proc/acpi/sleep       # for suspend to ram
> +  echo 3 > /proc/acpi/sleep       # for suspend to ram, but with more power conservative
> +  echo 4 > /proc/acpi/sleep       # for suspend to disk
> +  echo 5 > /proc/acpi/sleep       # for shutdown unfriendly the system
> +
> +and perhaps::
> +
> +  echo 4b > /proc/acpi/sleep      # for suspend to disk via s4bios
> +
> +Frequently Asked Questions
> +==========================
> +
> +Q:
> +  well, suspending a server is IMHO a really stupid thing,
> +  but... (Diego Zuccato):
> +
> +A:
> +  You bought new UPS for your server. How do you install it without
> +  bringing machine down? Suspend to disk, rearrange power cables,
> +  resume.
> +
> +  You have your server on UPS. Power died, and UPS is indicating 30
> +  seconds to failure. What do you do? Suspend to disk.
> +
> +
> +Q:
> +  Maybe I'm missing something, but why don't the regular I/O paths work?
> +
> +A:
> +  We do use the regular I/O paths. However we cannot restore the data
> +  to its original location as we load it. That would create an
> +  inconsistent kernel state which would certainly result in an oops.
> +  Instead, we load the image into unused memory and then atomically copy
> +  it back to it original location. This implies, of course, a maximum
> +  image size of half the amount of memory.
> +
> +  There are two solutions to this:
> +
> +  * require half of memory to be free during suspend. That way you can
> +    read "new" data onto free spots, then cli and copy
> +
> +  * assume we had special "polling" ide driver that only uses memory
> +    between 0-640KB. That way, I'd have to make sure that 0-640KB is free
> +    during suspending, but otherwise it would work...
> +
> +  suspend2 shares this fundamental limitation, but does not include user
> +  data and disk caches into "used memory" by saving them in
> +  advance. That means that the limitation goes away in practice.
> +
> +Q:
> +  Does linux support ACPI S4?
> +
> +A:
> +  Yes. That's what echo platform > /sys/power/disk does.
> +
> +Q:
> +  What is 'suspend2'?
> +
> +A:
> +  suspend2 is 'Software Suspend 2', a forked implementation of
> +  suspend-to-disk which is available as separate patches for 2.4 and 2.6
> +  kernels from swsusp.sourceforge.net. It includes support for SMP, 4GB
> +  highmem and preemption. It also has a extensible architecture that
> +  allows for arbitrary transformations on the image (compression,
> +  encryption) and arbitrary backends for writing the image (eg to swap
> +  or an NFS share[Work In Progress]). Questions regarding suspend2
> +  should be sent to the mailing list available through the suspend2
> +  website, and not to the Linux Kernel Mailing List. We are working
> +  toward merging suspend2 into the mainline kernel.
> +
> +Q:
> +  What is the freezing of tasks and why are we using it?
> +
> +A:
> +  The freezing of tasks is a mechanism by which user space processes and some
> +  kernel threads are controlled during hibernation or system-wide suspend (on some
> +  architectures).  See freezing-of-tasks.txt for details.
> +
> +Q:
> +  What is the difference between "platform" and "shutdown"?
> +
> +A:
> +  shutdown:
> +	save state in linux, then tell bios to powerdown
> +
> +  platform:
> +	save state in linux, then tell bios to powerdown and blink
> +        "suspended led"
> +
> +  "platform" is actually right thing to do where supported, but
> +  "shutdown" is most reliable (except on ACPI systems).
> +
> +Q:
> +  I do not understand why you have such strong objections to idea of
> +  selective suspend.
> +
> +A:
> +  Do selective suspend during runtime power management, that's okay. But
> +  it's useless for suspend-to-disk. (And I do not see how you could use
> +  it for suspend-to-ram, I hope you do not want that).
> +
> +  Lets see, so you suggest to
> +
> +  * SUSPEND all but swap device and parents
> +  * Snapshot
> +  * Write image to disk
> +  * SUSPEND swap device and parents
> +  * Powerdown
> +
> +  Oh no, that does not work, if swap device or its parents uses DMA,
> +  you've corrupted data. You'd have to do
> +
> +  * SUSPEND all but swap device and parents
> +  * FREEZE swap device and parents
> +  * Snapshot
> +  * UNFREEZE swap device and parents
> +  * Write
> +  * SUSPEND swap device and parents
> +
> +  Which means that you still need that FREEZE state, and you get more
> +  complicated code. (And I have not yet introduce details like system
> +  devices).
> +
> +Q:
> +  There don't seem to be any generally useful behavioral
> +  distinctions between SUSPEND and FREEZE.
> +
> +A:
> +  Doing SUSPEND when you are asked to do FREEZE is always correct,
> +  but it may be unnecessarily slow. If you want your driver to stay simple,
> +  slowness may not matter to you. It can always be fixed later.
> +
> +  For devices like disk it does matter, you do not want to spindown for
> +  FREEZE.
> +
> +Q:
> +  After resuming, system is paging heavily, leading to very bad interactivity.
> +
> +A:
> +  Try running::
> +
> +    cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u | while read file
> +    do
> +      test -f "$file" && cat "$file" > /dev/null
> +    done
> +
> +  after resume. swapoff -a; swapon -a may also be useful.
> +
> +Q:
> +  What happens to devices during swsusp? They seem to be resumed
> +  during system suspend?
> +
> +A:
> +  That's correct. We need to resume them if we want to write image to
> +  disk. Whole sequence goes like
> +
> +      **Suspend part**
> +
> +      running system, user asks for suspend-to-disk
> +
> +      user processes are stopped
> +
> +      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
> +      with state snapshot
> +
> +      state snapshot: copy of whole used memory is taken with interrupts disabled
> +
> +      resume(): devices are woken up so that we can write image to swap
> +
> +      write image to swap
> +
> +      suspend(PMSG_SUSPEND): suspend devices so that we can power off
> +
> +      turn the power off
> +
> +      **Resume part**
> +
> +      (is actually pretty similar)
> +
> +      running system, user asks for suspend-to-disk
> +
> +      user processes are stopped (in common case there are none,
> +      but with resume-from-initrd, no one knows)
> +
> +      read image from disk
> +
> +      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
> +      with image restoration
> +
> +      image restoration: rewrite memory with image
> +
> +      resume(): devices are woken up so that system can continue
> +
> +      thaw all user processes
> +
> +Q:
> +  What is this 'Encrypt suspend image' for?
> +
> +A:
> +  First of all: it is not a replacement for dm-crypt encrypted swap.
> +  It cannot protect your computer while it is suspended. Instead it does
> +  protect from leaking sensitive data after resume from suspend.
> +
> +  Think of the following: you suspend while an application is running
> +  that keeps sensitive data in memory. The application itself prevents
> +  the data from being swapped out. Suspend, however, must write these
> +  data to swap to be able to resume later on. Without suspend encryption
> +  your sensitive data are then stored in plaintext on disk.  This means
> +  that after resume your sensitive data are accessible to all
> +  applications having direct access to the swap device which was used
> +  for suspend. If you don't need swap after resume these data can remain
> +  on disk virtually forever. Thus it can happen that your system gets
> +  broken in weeks later and sensitive data which you thought were
> +  encrypted and protected are retrieved and stolen from the swap device.
> +  To prevent this situation you should use 'Encrypt suspend image'.
> +
> +  During suspend a temporary key is created and this key is used to
> +  encrypt the data written to disk. When, during resume, the data was
> +  read back into memory the temporary key is destroyed which simply
> +  means that all data written to disk during suspend are then
> +  inaccessible so they can't be stolen later on.  The only thing that
> +  you must then take care of is that you call 'mkswap' for the swap
> +  partition used for suspend as early as possible during regular
> +  boot. This asserts that any temporary key from an oopsed suspend or
> +  from a failed or aborted resume is erased from the swap device.
> +
> +  As a rule of thumb use encrypted swap to protect your data while your
> +  system is shut down or suspended. Additionally use the encrypted
> +  suspend image to prevent sensitive data from being stolen after
> +  resume.
> +
> +Q:
> +  Can I suspend to a swap file?
> +
> +A:
> +  Generally, yes, you can.  However, it requires you to use the "resume=" and
> +  "resume_offset=" kernel command line parameters, so the resume from a swap file
> +  cannot be initiated from an initrd or initramfs image.  See
> +  swsusp-and-swap-files.txt for details.
> +
> +Q:
> +  Is there a maximum system RAM size that is supported by swsusp?
> +
> +A:
> +  It should work okay with highmem.
> +
> +Q:
> +  Does swsusp (to disk) use only one swap partition or can it use
> +  multiple swap partitions (aggregate them into one logical space)?
> +
> +A:
> +  Only one swap partition, sorry.
> +
> +Q:
> +  If my application(s) causes lots of memory & swap space to be used
> +  (over half of the total system RAM), is it correct that it is likely
> +  to be useless to try to suspend to disk while that app is running?
> +
> +A:
> +  No, it should work okay, as long as your app does not mlock()
> +  it. Just prepare big enough swap partition.
> +
> +Q:
> +  What information is useful for debugging suspend-to-disk problems?
> +
> +A:
> +  Well, last messages on the screen are always useful. If something
> +  is broken, it is usually some kernel driver, therefore trying with as
> +  little as possible modules loaded helps a lot. I also prefer people to
> +  suspend from console, preferably without X running. Booting with
> +  init=/bin/bash, then swapon and starting suspend sequence manually
> +  usually does the trick. Then it is good idea to try with latest
> +  vanilla kernel.
> +
> +Q:
> +  How can distributions ship a swsusp-supporting kernel with modular
> +  disk drivers (especially SATA)?
> +
> +A:
> +  Well, it can be done, load the drivers, then do echo into
> +  /sys/power/resume file from initrd. Be sure not to mount
> +  anything, not even read-only mount, or you are going to lose your
> +  data.
> +
> +Q:
> +  How do I make suspend more verbose?
> +
> +A:
> +  If you want to see any non-error kernel messages on the virtual
> +  terminal the kernel switches to during suspend, you have to set the
> +  kernel console loglevel to at least 4 (KERN_WARNING), for example by
> +  doing::
> +
> +	# save the old loglevel
> +	read LOGLEVEL DUMMY < /proc/sys/kernel/printk
> +	# set the loglevel so we see the progress bar.
> +	# if the level is higher than needed, we leave it alone.
> +	if [ $LOGLEVEL -lt 5 ]; then
> +	        echo 5 > /proc/sys/kernel/printk
> +		fi
> +
> +        IMG_SZ=0
> +        read IMG_SZ < /sys/power/image_size
> +        echo -n disk > /sys/power/state
> +        RET=$?
> +        #
> +        # the logic here is:
> +        # if image_size > 0 (without kernel support, IMG_SZ will be zero),
> +        # then try again with image_size set to zero.
> +	if [ $RET -ne 0 -a $IMG_SZ -ne 0 ]; then # try again with minimal image size
> +                echo 0 > /sys/power/image_size
> +                echo -n disk > /sys/power/state
> +                RET=$?
> +        fi
> +
> +	# restore previous loglevel
> +	echo $LOGLEVEL > /proc/sys/kernel/printk
> +	exit $RET
> +
> +Q:
> +  Is this true that if I have a mounted filesystem on a USB device and
> +  I suspend to disk, I can lose data unless the filesystem has been mounted
> +  with "sync"?
> +
> +A:
> +  That's right ... if you disconnect that device, you may lose data.
> +  In fact, even with "-o sync" you can lose data if your programs have
> +  information in buffers they haven't written out to a disk you disconnect,
> +  or if you disconnect before the device finished saving data you wrote.
> +
> +  Software suspend normally powers down USB controllers, which is equivalent
> +  to disconnecting all USB devices attached to your system.
> +
> +  Your system might well support low-power modes for its USB controllers
> +  while the system is asleep, maintaining the connection, using true sleep
> +  modes like "suspend-to-RAM" or "standby".  (Don't write "disk" to the
> +  /sys/power/state file; write "standby" or "mem".)  We've not seen any
> +  hardware that can use these modes through software suspend, although in
> +  theory some systems might support "platform" modes that won't break the
> +  USB connections.
> +
> +  Remember that it's always a bad idea to unplug a disk drive containing a
> +  mounted filesystem.  That's true even when your system is asleep!  The
> +  safest thing is to unmount all filesystems on removable media (such USB,
> +  Firewire, CompactFlash, MMC, external SATA, or even IDE hotplug bays)
> +  before suspending; then remount them after resuming.
> +
> +  There is a work-around for this problem.  For more information, see
> +  Documentation/driver-api/usb/persist.rst.
> +
> +Q:
> +  Can I suspend-to-disk using a swap partition under LVM?
> +
> +A:
> +  Yes and No.  You can suspend successfully, but the kernel will not be able
> +  to resume on its own.  You need an initramfs that can recognize the resume
> +  situation, activate the logical volume containing the swap volume (but not
> +  touch any filesystems!), and eventually call::
> +
> +    echo -n "$major:$minor" > /sys/power/resume
> +
> +  where $major and $minor are the respective major and minor device numbers of
> +  the swap volume.
> +
> +  uswsusp works with LVM, too.  See http://suspend.sourceforge.net/
> +
> +Q:
> +  I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
> +  compiled with the similar configuration files. Anyway I found that
> +  suspend to disk (and resume) is much slower on 2.6.16 compared to
> +  2.6.15. Any idea for why that might happen or how can I speed it up?
> +
> +A:
> +  This is because the size of the suspend image is now greater than
> +  for 2.6.15 (by saving more data we can get more responsive system
> +  after resume).
> +
> +  There's the /sys/power/image_size knob that controls the size of the
> +  image.  If you set it to 0 (eg. by echo 0 > /sys/power/image_size as
> +  root), the 2.6.15 behavior should be restored.  If it is still too
> +  slow, take a look at suspend.sf.net -- userland suspend is faster and
> +  supports LZF compression to speed it up further.
> diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt
> deleted file mode 100644
> index 236d1fb13640..000000000000
> --- a/Documentation/power/swsusp.txt
> +++ /dev/null
> @@ -1,446 +0,0 @@
> -Some warnings, first.
> -
> - * BIG FAT WARNING *********************************************************
> - *
> - * If you touch anything on disk between suspend and resume...
> - *				...kiss your data goodbye.
> - *
> - * If you do resume from initrd after your filesystems are mounted...
> - *				...bye bye root partition.
> - *			[this is actually same case as above]
> - *
> - * If you have unsupported (*) devices using DMA, you may have some
> - * problems. If your disk driver does not support suspend... (IDE does),
> - * it may cause some problems, too. If you change kernel command line
> - * between suspend and resume, it may do something wrong. If you change
> - * your hardware while system is suspended... well, it was not good idea;
> - * but it will probably only crash.
> - *
> - * (*) suspend/resume support is needed to make it safe.
> - *
> - * If you have any filesystems on USB devices mounted before software suspend,
> - * they won't be accessible after resume and you may lose data, as though
> - * you have unplugged the USB devices with mounted filesystems on them;
> - * see the FAQ below for details.  (This is not true for more traditional
> - * power states like "standby", which normally don't turn USB off.)
> -
> -Swap partition:
> -You need to append resume=/dev/your_swap_partition to kernel command
> -line or specify it using /sys/power/resume.
> -
> -Swap file:
> -If using a swapfile you can also specify a resume offset using
> -resume_offset=<number> on the kernel command line or specify it
> -in /sys/power/resume_offset.
> -
> -After preparing then you suspend by
> -
> -echo shutdown > /sys/power/disk; echo disk > /sys/power/state
> -
> -. If you feel ACPI works pretty well on your system, you might try
> -
> -echo platform > /sys/power/disk; echo disk > /sys/power/state
> -
> -. If you would like to write hibernation image to swap and then suspend
> -to RAM (provided your platform supports it), you can try
> -
> -echo suspend > /sys/power/disk; echo disk > /sys/power/state
> -
> -. If you have SATA disks, you'll need recent kernels with SATA suspend
> -support. For suspend and resume to work, make sure your disk drivers
> -are built into kernel -- not modules. [There's way to make
> -suspend/resume with modular disk drivers, see FAQ, but you probably
> -should not do that.]
> -
> -If you want to limit the suspend image size to N bytes, do
> -
> -echo N > /sys/power/image_size
> -
> -before suspend (it is limited to around 2/5 of available RAM by default).
> -
> -. The resume process checks for the presence of the resume device,
> -if found, it then checks the contents for the hibernation image signature.
> -If both are found, it resumes the hibernation image.
> -
> -. The resume process may be triggered in two ways:
> -  1) During lateinit:  If resume=/dev/your_swap_partition is specified on
> -     the kernel command line, lateinit runs the resume process.  If the
> -     resume device has not been probed yet, the resume process fails and
> -     bootup continues.
> -  2) Manually from an initrd or initramfs:  May be run from
> -     the init script by using the /sys/power/resume file.  It is vital
> -     that this be done prior to remounting any filesystems (even as
> -     read-only) otherwise data may be corrupted.
> -
> -Article about goals and implementation of Software Suspend for Linux
> -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> -Author: Gábor Kuti
> -Last revised: 2003-10-20 by Pavel Machek
> -
> -Idea and goals to achieve
> -
> -Nowadays it is common in several laptops that they have a suspend button. It
> -saves the state of the machine to a filesystem or to a partition and switches
> -to standby mode. Later resuming the machine the saved state is loaded back to
> -ram and the machine can continue its work. It has two real benefits. First we
> -save ourselves the time machine goes down and later boots up, energy costs
> -are real high when running from batteries. The other gain is that we don't have to
> -interrupt our programs so processes that are calculating something for a long
> -time shouldn't need to be written interruptible.
> -
> -swsusp saves the state of the machine into active swaps and then reboots or
> -powerdowns.  You must explicitly specify the swap partition to resume from with
> -``resume='' kernel option. If signature is found it loads and restores saved
> -state. If the option ``noresume'' is specified as a boot parameter, it skips
> -the resuming.  If the option ``hibernate=nocompress'' is specified as a boot
> -parameter, it saves hibernation image without compression.
> -
> -In the meantime while the system is suspended you should not add/remove any
> -of the hardware, write to the filesystems, etc.
> -
> -Sleep states summary
> -====================
> -
> -There are three different interfaces you can use, /proc/acpi should
> -work like this:
> -
> -In a really perfect world:
> -echo 1 > /proc/acpi/sleep       # for standby
> -echo 2 > /proc/acpi/sleep       # for suspend to ram
> -echo 3 > /proc/acpi/sleep       # for suspend to ram, but with more power conservative
> -echo 4 > /proc/acpi/sleep       # for suspend to disk
> -echo 5 > /proc/acpi/sleep       # for shutdown unfriendly the system
> -
> -and perhaps
> -echo 4b > /proc/acpi/sleep      # for suspend to disk via s4bios
> -
> -Frequently Asked Questions
> -==========================
> -
> -Q: well, suspending a server is IMHO a really stupid thing,
> -but... (Diego Zuccato):
> -
> -A: You bought new UPS for your server. How do you install it without
> -bringing machine down? Suspend to disk, rearrange power cables,
> -resume.
> -
> -You have your server on UPS. Power died, and UPS is indicating 30
> -seconds to failure. What do you do? Suspend to disk.
> -
> -
> -Q: Maybe I'm missing something, but why don't the regular I/O paths work?
> -
> -A: We do use the regular I/O paths. However we cannot restore the data
> -to its original location as we load it. That would create an
> -inconsistent kernel state which would certainly result in an oops.
> -Instead, we load the image into unused memory and then atomically copy
> -it back to it original location. This implies, of course, a maximum
> -image size of half the amount of memory.
> -
> -There are two solutions to this:
> -
> -* require half of memory to be free during suspend. That way you can
> -read "new" data onto free spots, then cli and copy
> -
> -* assume we had special "polling" ide driver that only uses memory
> -between 0-640KB. That way, I'd have to make sure that 0-640KB is free
> -during suspending, but otherwise it would work...
> -
> -suspend2 shares this fundamental limitation, but does not include user
> -data and disk caches into "used memory" by saving them in
> -advance. That means that the limitation goes away in practice.
> -
> -Q: Does linux support ACPI S4?
> -
> -A: Yes. That's what echo platform > /sys/power/disk does.
> -
> -Q: What is 'suspend2'?
> -
> -A: suspend2 is 'Software Suspend 2', a forked implementation of
> -suspend-to-disk which is available as separate patches for 2.4 and 2.6
> -kernels from swsusp.sourceforge.net. It includes support for SMP, 4GB
> -highmem and preemption. It also has a extensible architecture that
> -allows for arbitrary transformations on the image (compression,
> -encryption) and arbitrary backends for writing the image (eg to swap
> -or an NFS share[Work In Progress]). Questions regarding suspend2
> -should be sent to the mailing list available through the suspend2
> -website, and not to the Linux Kernel Mailing List. We are working
> -toward merging suspend2 into the mainline kernel.
> -
> -Q: What is the freezing of tasks and why are we using it?
> -
> -A: The freezing of tasks is a mechanism by which user space processes and some
> -kernel threads are controlled during hibernation or system-wide suspend (on some
> -architectures).  See freezing-of-tasks.txt for details.
> -
> -Q: What is the difference between "platform" and "shutdown"?
> -
> -A:
> -
> -shutdown: save state in linux, then tell bios to powerdown
> -
> -platform: save state in linux, then tell bios to powerdown and blink
> -          "suspended led"
> -
> -"platform" is actually right thing to do where supported, but
> -"shutdown" is most reliable (except on ACPI systems).
> -
> -Q: I do not understand why you have such strong objections to idea of
> -selective suspend.
> -
> -A: Do selective suspend during runtime power management, that's okay. But
> -it's useless for suspend-to-disk. (And I do not see how you could use
> -it for suspend-to-ram, I hope you do not want that).
> -
> -Lets see, so you suggest to
> -
> -* SUSPEND all but swap device and parents
> -* Snapshot
> -* Write image to disk
> -* SUSPEND swap device and parents
> -* Powerdown
> -
> -Oh no, that does not work, if swap device or its parents uses DMA,
> -you've corrupted data. You'd have to do
> -
> -* SUSPEND all but swap device and parents
> -* FREEZE swap device and parents
> -* Snapshot
> -* UNFREEZE swap device and parents
> -* Write
> -* SUSPEND swap device and parents
> -
> -Which means that you still need that FREEZE state, and you get more
> -complicated code. (And I have not yet introduce details like system
> -devices).
> -
> -Q: There don't seem to be any generally useful behavioral
> -distinctions between SUSPEND and FREEZE.
> -
> -A: Doing SUSPEND when you are asked to do FREEZE is always correct,
> -but it may be unnecessarily slow. If you want your driver to stay simple,
> -slowness may not matter to you. It can always be fixed later.
> -
> -For devices like disk it does matter, you do not want to spindown for
> -FREEZE.
> -
> -Q: After resuming, system is paging heavily, leading to very bad interactivity.
> -
> -A: Try running
> -
> -cat /proc/[0-9]*/maps | grep / | sed 's:.* /:/:' | sort -u | while read file
> -do
> -  test -f "$file" && cat "$file" > /dev/null
> -done
> -
> -after resume. swapoff -a; swapon -a may also be useful.
> -
> -Q: What happens to devices during swsusp? They seem to be resumed
> -during system suspend?
> -
> -A: That's correct. We need to resume them if we want to write image to
> -disk. Whole sequence goes like
> -
> -      Suspend part
> -      ~~~~~~~~~~~~
> -      running system, user asks for suspend-to-disk
> -
> -      user processes are stopped
> -
> -      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
> -      		      with state snapshot
> -
> -      state snapshot: copy of whole used memory is taken with interrupts disabled
> -
> -      resume(): devices are woken up so that we can write image to swap
> -
> -      write image to swap
> -
> -      suspend(PMSG_SUSPEND): suspend devices so that we can power off
> -
> -      turn the power off
> -
> -      Resume part
> -      ~~~~~~~~~~~
> -      (is actually pretty similar)
> -
> -      running system, user asks for suspend-to-disk
> -
> -      user processes are stopped (in common case there are none, but with resume-from-initrd, no one knows)
> -
> -      read image from disk
> -
> -      suspend(PMSG_FREEZE): devices are frozen so that they don't interfere
> -      		      with image restoration
> -
> -      image restoration: rewrite memory with image
> -
> -      resume(): devices are woken up so that system can continue
> -
> -      thaw all user processes
> -
> -Q: What is this 'Encrypt suspend image' for?
> -
> -A: First of all: it is not a replacement for dm-crypt encrypted swap.
> -It cannot protect your computer while it is suspended. Instead it does
> -protect from leaking sensitive data after resume from suspend.
> -
> -Think of the following: you suspend while an application is running
> -that keeps sensitive data in memory. The application itself prevents
> -the data from being swapped out. Suspend, however, must write these
> -data to swap to be able to resume later on. Without suspend encryption
> -your sensitive data are then stored in plaintext on disk.  This means
> -that after resume your sensitive data are accessible to all
> -applications having direct access to the swap device which was used
> -for suspend. If you don't need swap after resume these data can remain
> -on disk virtually forever. Thus it can happen that your system gets
> -broken in weeks later and sensitive data which you thought were
> -encrypted and protected are retrieved and stolen from the swap device.
> -To prevent this situation you should use 'Encrypt suspend image'.
> -
> -During suspend a temporary key is created and this key is used to
> -encrypt the data written to disk. When, during resume, the data was
> -read back into memory the temporary key is destroyed which simply
> -means that all data written to disk during suspend are then
> -inaccessible so they can't be stolen later on.  The only thing that
> -you must then take care of is that you call 'mkswap' for the swap
> -partition used for suspend as early as possible during regular
> -boot. This asserts that any temporary key from an oopsed suspend or
> -from a failed or aborted resume is erased from the swap device.
> -
> -As a rule of thumb use encrypted swap to protect your data while your
> -system is shut down or suspended. Additionally use the encrypted
> -suspend image to prevent sensitive data from being stolen after
> -resume.
> -
> -Q: Can I suspend to a swap file?
> -
> -A: Generally, yes, you can.  However, it requires you to use the "resume=" and
> -"resume_offset=" kernel command line parameters, so the resume from a swap file
> -cannot be initiated from an initrd or initramfs image.  See
> -swsusp-and-swap-files.txt for details.
> -
> -Q: Is there a maximum system RAM size that is supported by swsusp?
> -
> -A: It should work okay with highmem.
> -
> -Q: Does swsusp (to disk) use only one swap partition or can it use
> -multiple swap partitions (aggregate them into one logical space)?
> -
> -A: Only one swap partition, sorry.
> -
> -Q: If my application(s) causes lots of memory & swap space to be used
> -(over half of the total system RAM), is it correct that it is likely
> -to be useless to try to suspend to disk while that app is running?
> -
> -A: No, it should work okay, as long as your app does not mlock()
> -it. Just prepare big enough swap partition.
> -
> -Q: What information is useful for debugging suspend-to-disk problems?
> -
> -A: Well, last messages on the screen are always useful. If something
> -is broken, it is usually some kernel driver, therefore trying with as
> -little as possible modules loaded helps a lot. I also prefer people to
> -suspend from console, preferably without X running. Booting with
> -init=/bin/bash, then swapon and starting suspend sequence manually
> -usually does the trick. Then it is good idea to try with latest
> -vanilla kernel.
> -
> -Q: How can distributions ship a swsusp-supporting kernel with modular
> -disk drivers (especially SATA)?
> -
> -A: Well, it can be done, load the drivers, then do echo into
> -/sys/power/resume file from initrd. Be sure not to mount
> -anything, not even read-only mount, or you are going to lose your
> -data.
> -
> -Q: How do I make suspend more verbose?
> -
> -A: If you want to see any non-error kernel messages on the virtual
> -terminal the kernel switches to during suspend, you have to set the
> -kernel console loglevel to at least 4 (KERN_WARNING), for example by
> -doing
> -
> -	# save the old loglevel
> -	read LOGLEVEL DUMMY < /proc/sys/kernel/printk
> -	# set the loglevel so we see the progress bar.
> -	# if the level is higher than needed, we leave it alone.
> -	if [ $LOGLEVEL -lt 5 ]; then
> -	        echo 5 > /proc/sys/kernel/printk
> -		fi
> -
> -        IMG_SZ=0
> -        read IMG_SZ < /sys/power/image_size
> -        echo -n disk > /sys/power/state
> -        RET=$?
> -        #
> -        # the logic here is:
> -        # if image_size > 0 (without kernel support, IMG_SZ will be zero),
> -        # then try again with image_size set to zero.
> -	if [ $RET -ne 0 -a $IMG_SZ -ne 0 ]; then # try again with minimal image size
> -                echo 0 > /sys/power/image_size
> -                echo -n disk > /sys/power/state
> -                RET=$?
> -        fi
> -
> -	# restore previous loglevel
> -	echo $LOGLEVEL > /proc/sys/kernel/printk
> -	exit $RET
> -
> -Q: Is this true that if I have a mounted filesystem on a USB device and
> -I suspend to disk, I can lose data unless the filesystem has been mounted
> -with "sync"?
> -
> -A: That's right ... if you disconnect that device, you may lose data.
> -In fact, even with "-o sync" you can lose data if your programs have
> -information in buffers they haven't written out to a disk you disconnect,
> -or if you disconnect before the device finished saving data you wrote.
> -
> -Software suspend normally powers down USB controllers, which is equivalent
> -to disconnecting all USB devices attached to your system.
> -
> -Your system might well support low-power modes for its USB controllers
> -while the system is asleep, maintaining the connection, using true sleep
> -modes like "suspend-to-RAM" or "standby".  (Don't write "disk" to the
> -/sys/power/state file; write "standby" or "mem".)  We've not seen any
> -hardware that can use these modes through software suspend, although in
> -theory some systems might support "platform" modes that won't break the
> -USB connections.
> -
> -Remember that it's always a bad idea to unplug a disk drive containing a
> -mounted filesystem.  That's true even when your system is asleep!  The
> -safest thing is to unmount all filesystems on removable media (such USB,
> -Firewire, CompactFlash, MMC, external SATA, or even IDE hotplug bays)
> -before suspending; then remount them after resuming.
> -
> -There is a work-around for this problem.  For more information, see
> -Documentation/driver-api/usb/persist.rst.
> -
> -Q: Can I suspend-to-disk using a swap partition under LVM?
> -
> -A: Yes and No.  You can suspend successfully, but the kernel will not be able
> -to resume on its own.  You need an initramfs that can recognize the resume
> -situation, activate the logical volume containing the swap volume (but not
> -touch any filesystems!), and eventually call
> -
> -echo -n "$major:$minor" > /sys/power/resume
> -
> -where $major and $minor are the respective major and minor device numbers of
> -the swap volume.
> -
> -uswsusp works with LVM, too.  See http://suspend.sourceforge.net/
> -
> -Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were
> -compiled with the similar configuration files. Anyway I found that
> -suspend to disk (and resume) is much slower on 2.6.16 compared to
> -2.6.15. Any idea for why that might happen or how can I speed it up?
> -
> -A: This is because the size of the suspend image is now greater than
> -for 2.6.15 (by saving more data we can get more responsive system
> -after resume).
> -
> -There's the /sys/power/image_size knob that controls the size of the
> -image.  If you set it to 0 (eg. by echo 0 > /sys/power/image_size as
> -root), the 2.6.15 behavior should be restored.  If it is still too
> -slow, take a look at suspend.sf.net -- userland suspend is faster and
> -supports LZF compression to speed it up further.
> diff --git a/Documentation/power/tricks.txt b/Documentation/power/tricks.rst
> similarity index 93%
> rename from Documentation/power/tricks.txt
> rename to Documentation/power/tricks.rst
> index a1b8f7249f4c..ca787f142c3f 100644
> --- a/Documentation/power/tricks.txt
> +++ b/Documentation/power/tricks.rst
> @@ -1,5 +1,7 @@
> -	swsusp/S3 tricks
> -	~~~~~~~~~~~~~~~~
> +================
> +swsusp/S3 tricks
> +================
> +
>  Pavel Machek <pavel@xxxxxx>
>  
>  If you want to trick swsusp/S3 into working, you might want to try:
> diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.rst
> similarity index 85%
> rename from Documentation/power/userland-swsusp.txt
> rename to Documentation/power/userland-swsusp.rst
> index bbfcd1bbedc5..a0fa51bb1a4d 100644
> --- a/Documentation/power/userland-swsusp.txt
> +++ b/Documentation/power/userland-swsusp.rst
> @@ -1,4 +1,7 @@
> +=====================================================
>  Documentation for userland software suspend interface
> +=====================================================
> +
>  	(C) 2006 Rafael J. Wysocki <rjw@xxxxxxx>
>  
>  First, the warnings at the beginning of swsusp.txt still apply.
> @@ -30,13 +33,16 @@ called.
>  
>  The ioctl() commands recognized by the device are:
>  
> -SNAPSHOT_FREEZE - freeze user space processes (the current process is
> +SNAPSHOT_FREEZE
> +	freeze user space processes (the current process is
>  	not frozen); this is required for SNAPSHOT_CREATE_IMAGE
>  	and SNAPSHOT_ATOMIC_RESTORE to succeed
>  
> -SNAPSHOT_UNFREEZE - thaw user space processes frozen by SNAPSHOT_FREEZE
> +SNAPSHOT_UNFREEZE
> +	thaw user space processes frozen by SNAPSHOT_FREEZE
>  
> -SNAPSHOT_CREATE_IMAGE - create a snapshot of the system memory; the
> +SNAPSHOT_CREATE_IMAGE
> +	create a snapshot of the system memory; the
>  	last argument of ioctl() should be a pointer to an int variable,
>  	the value of which will indicate whether the call returned after
>  	creating the snapshot (1) or after restoring the system memory state
> @@ -45,48 +51,59 @@ SNAPSHOT_CREATE_IMAGE - create a snapshot of the system memory; the
>  	has been created the read() operation can be used to transfer
>  	it out of the kernel
>  
> -SNAPSHOT_ATOMIC_RESTORE - restore the system memory state from the
> +SNAPSHOT_ATOMIC_RESTORE
> +	restore the system memory state from the
>  	uploaded snapshot image; before calling it you should transfer
>  	the system memory snapshot back to the kernel using the write()
>  	operation; this call will not succeed if the snapshot
>  	image is not available to the kernel
>  
> -SNAPSHOT_FREE - free memory allocated for the snapshot image
> +SNAPSHOT_FREE
> +	free memory allocated for the snapshot image
>  
> -SNAPSHOT_PREF_IMAGE_SIZE - set the preferred maximum size of the image
> +SNAPSHOT_PREF_IMAGE_SIZE
> +	set the preferred maximum size of the image
>  	(the kernel will do its best to ensure the image size will not exceed
>  	this number, but if it turns out to be impossible, the kernel will
>  	create the smallest image possible)
>  
> -SNAPSHOT_GET_IMAGE_SIZE - return the actual size of the hibernation image
> +SNAPSHOT_GET_IMAGE_SIZE
> +	return the actual size of the hibernation image
>  
> -SNAPSHOT_AVAIL_SWAP_SIZE - return the amount of available swap in bytes (the
> +SNAPSHOT_AVAIL_SWAP_SIZE
> +	return the amount of available swap in bytes (the
>  	last argument should be a pointer to an unsigned int variable that will
>  	contain the result if the call is successful).
>  
> -SNAPSHOT_ALLOC_SWAP_PAGE - allocate a swap page from the resume partition
> +SNAPSHOT_ALLOC_SWAP_PAGE
> +	allocate a swap page from the resume partition
>  	(the last argument should be a pointer to a loff_t variable that
>  	will contain the swap page offset if the call is successful)
>  
> -SNAPSHOT_FREE_SWAP_PAGES - free all swap pages allocated by
> +SNAPSHOT_FREE_SWAP_PAGES
> +	free all swap pages allocated by
>  	SNAPSHOT_ALLOC_SWAP_PAGE
>  
> -SNAPSHOT_SET_SWAP_AREA - set the resume partition and the offset (in <PAGE_SIZE>
> +SNAPSHOT_SET_SWAP_AREA
> +	set the resume partition and the offset (in <PAGE_SIZE>
>  	units) from the beginning of the partition at which the swap header is
>  	located (the last ioctl() argument should point to a struct
>  	resume_swap_area, as defined in kernel/power/suspend_ioctls.h,
>  	containing the resume device specification and the offset); for swap
>  	partitions the offset is always 0, but it is different from zero for
> -	swap files (see Documentation/power/swsusp-and-swap-files.txt for
> +	swap files (see Documentation/power/swsusp-and-swap-files.rst for
>  	details).
>  
> -SNAPSHOT_PLATFORM_SUPPORT - enable/disable the hibernation platform support,
> +SNAPSHOT_PLATFORM_SUPPORT
> +	enable/disable the hibernation platform support,
>  	depending on the argument value (enable, if the argument is nonzero)
>  
> -SNAPSHOT_POWER_OFF - make the kernel transition the system to the hibernation
> +SNAPSHOT_POWER_OFF
> +	make the kernel transition the system to the hibernation
>  	state (eg. ACPI S4) using the platform (eg. ACPI) driver
>  
> -SNAPSHOT_S2RAM - suspend to RAM; using this call causes the kernel to
> +SNAPSHOT_S2RAM
> +	suspend to RAM; using this call causes the kernel to
>  	immediately enter the suspend-to-RAM state, so this call must always
>  	be preceded by the SNAPSHOT_FREEZE call and it is also necessary
>  	to use the SNAPSHOT_UNFREEZE call after the system wakes up.  This call
> @@ -98,10 +115,11 @@ SNAPSHOT_S2RAM - suspend to RAM; using this call causes the kernel to
>  
>  The device's read() operation can be used to transfer the snapshot image from
>  the kernel.  It has the following limitations:
> +
>  - you cannot read() more than one virtual memory page at a time
>  - read()s across page boundaries are impossible (ie. if you read() 1/2 of
> -	a page in the previous call, you will only be able to read()
> -	_at_ _most_ 1/2 of the page in the next call)
> +  a page in the previous call, you will only be able to read()
> +  **at most** 1/2 of the page in the next call)
>  
>  The device's write() operation is used for uploading the system memory snapshot
>  into the kernel.  It has the same limitations as the read() operation.
> @@ -143,8 +161,10 @@ preferably using mlockall(), before calling SNAPSHOT_FREEZE.
>  The suspending utility MUST check the value stored by SNAPSHOT_CREATE_IMAGE
>  in the memory location pointed to by the last argument of ioctl() and proceed
>  in accordance with it:
> +
>  1. 	If the value is 1 (ie. the system memory snapshot has just been
>  	created and the system is ready for saving it):
> +
>  	(a)	The suspending utility MUST NOT close the snapshot device
>  		_unless_ the whole suspend procedure is to be cancelled, in
>  		which case, if the snapshot image has already been saved, the
> @@ -158,6 +178,7 @@ in accordance with it:
>  		called.  However, it MAY mount a file system that was not
>  		mounted at that time and perform some operations on it (eg.
>  		use it for saving the image).
> +
>  2.	If the value is 0 (ie. the system state has just been restored from
>  	the snapshot image), the suspending utility MUST close the snapshot
>  	device.  Afterwards it will be treated as a regular userland process,
> diff --git a/Documentation/power/video.txt b/Documentation/power/video.rst
> similarity index 56%
> rename from Documentation/power/video.txt
> rename to Documentation/power/video.rst
> index 3e6272bc4472..337a2ba9f32f 100644
> --- a/Documentation/power/video.txt
> +++ b/Documentation/power/video.rst
> @@ -1,7 +1,8 @@
> +===========================
> +Video issues with S3 resume
> +===========================
>  
> -		Video issues with S3 resume
> -		~~~~~~~~~~~~~~~~~~~~~~~~~~~
> -		  2003-2006, Pavel Machek
> +2003-2006, Pavel Machek
>  
>  During S3 resume, hardware needs to be reinitialized. For most
>  devices, this is easy, and kernel driver knows how to do
> @@ -41,37 +42,37 @@ There are a few types of systems where video works after S3 resume:
>  (1) systems where video state is preserved over S3.
>  
>  (2) systems where it is possible to call the video BIOS during S3
> -  resume. Unfortunately, it is not correct to call the video BIOS at
> -  that point, but it happens to work on some machines. Use
> -  acpi_sleep=s3_bios.
> +    resume. Unfortunately, it is not correct to call the video BIOS at
> +    that point, but it happens to work on some machines. Use
> +    acpi_sleep=s3_bios.
>  
>  (3) systems that initialize video card into vga text mode and where
> -  the BIOS works well enough to be able to set video mode. Use
> -  acpi_sleep=s3_mode on these.
> +    the BIOS works well enough to be able to set video mode. Use
> +    acpi_sleep=s3_mode on these.
>  
>  (4) on some systems s3_bios kicks video into text mode, and
> -  acpi_sleep=s3_bios,s3_mode is needed.
> +    acpi_sleep=s3_bios,s3_mode is needed.
>  
>  (5) radeon systems, where X can soft-boot your video card. You'll need
> -  a new enough X, and a plain text console (no vesafb or radeonfb). See
> -  http://www.doesi.gmxhome.de/linux/tm800s3/s3.html for more information.
> -  Alternatively, you should use vbetool (6) instead.
> +    a new enough X, and a plain text console (no vesafb or radeonfb). See
> +    http://www.doesi.gmxhome.de/linux/tm800s3/s3.html for more information.
> +    Alternatively, you should use vbetool (6) instead.
>  
>  (6) other radeon systems, where vbetool is enough to bring system back
> -  to life. It needs text console to be working. Do vbetool vbestate
> -  save > /tmp/delme; echo 3 > /proc/acpi/sleep; vbetool post; vbetool
> -  vbestate restore < /tmp/delme; setfont <whatever>, and your video
> -  should work.
> +    to life. It needs text console to be working. Do vbetool vbestate
> +    save > /tmp/delme; echo 3 > /proc/acpi/sleep; vbetool post; vbetool
> +    vbestate restore < /tmp/delme; setfont <whatever>, and your video
> +    should work.
>  
>  (7) on some systems, it is possible to boot most of kernel, and then
> -  POSTing bios works. Ole Rohne has patch to do just that at
> -  http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
> +    POSTing bios works. Ole Rohne has patch to do just that at
> +    http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
>  
> -(8) on some systems, you can use the video_post utility and or 
> -  do echo 3 > /sys/power/state  && /usr/sbin/video_post - which will 
> -  initialize the display in console mode. If you are in X, you can switch
> -  to a virtual terminal and back to X using  CTRL+ALT+F1 - CTRL+ALT+F7 to get
> -  the display working in graphical mode again.
> +(8) on some systems, you can use the video_post utility and or
> +    do echo 3 > /sys/power/state  && /usr/sbin/video_post - which will
> +    initialize the display in console mode. If you are in X, you can switch
> +    to a virtual terminal and back to X using  CTRL+ALT+F1 - CTRL+ALT+F7 to get
> +    the display working in graphical mode again.
>  
>  Now, if you pass acpi_sleep=something, and it does not work with your
>  bios, you'll get a hard crash during resume. Be careful. Also it is
> @@ -87,99 +88,126 @@ chance of working.
>  
>  Table of known working notebooks:
>  
> +
> +=============================== ===============================================
>  Model                           hack (or "how to do it")
> -------------------------------------------------------------------------------
> +=============================== ===============================================
>  Acer Aspire 1406LC		ole's late BIOS init (7), turn off DRI
>  Acer TM 230			s3_bios (2)
>  Acer TM 242FX			vbetool (6)
>  Acer TM C110			video_post (8)
> -Acer TM C300                    vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8)
> +Acer TM C300                    vga=normal (only suspend on console, not in X),
> +				vbetool (6) or video_post (8)
>  Acer TM 4052LCi		        s3_bios (2)
>  Acer TM 636Lci			s3_bios,s3_mode (4)
> -Acer TM 650 (Radeon M7)		vga=normal plus boot-radeon (5) gets text console back
> -Acer TM 660			??? (*)
> -Acer TM 800			vga=normal, X patches, see webpage (5) or vbetool (6)
> -Acer TM 803			vga=normal, X patches, see webpage (5) or vbetool (6)
> +Acer TM 650 (Radeon M7)		vga=normal plus boot-radeon (5) gets text
> +				console back
> +Acer TM 660			??? [#f1]_
> +Acer TM 800			vga=normal, X patches, see webpage (5)
> +				or vbetool (6)
> +Acer TM 803			vga=normal, X patches, see webpage (5)
> +				or vbetool (6)
>  Acer TM 803LCi			vga=normal, vbetool (6)
>  Arima W730a			vbetool needed (6)
> -Asus L2400D                     s3_mode (3)(***) (S1 also works OK)
> +Asus L2400D                     s3_mode (3) [#f2]_ (S1 also works OK)
>  Asus L3350M (SiS 740)           (6)
>  Asus L3800C (Radeon M7)		s3_bios (2) (S1 also works OK)
> -Asus M6887Ne			vga=normal, s3_bios (2), use radeon driver instead of fglrx in x.org
> +Asus M6887Ne			vga=normal, s3_bios (2), use radeon driver
> +				instead of fglrx in x.org
>  Athlon64 desktop prototype	s3_bios (2)
> -Compal CL-50			??? (*)
> +Compal CL-50			??? [#f1]_
>  Compaq Armada E500 - P3-700     none (1) (S1 also works OK)
>  Compaq Evo N620c		vga=normal, s3_bios (2)
>  Dell 600m, ATI R250 Lf		none (1), but needs xorg-x11-6.8.1.902-1
>  Dell D600, ATI RV250            vga=normal and X, or try vbestate (6)
> -Dell D610			vga=normal and X (possibly vbestate (6) too, but not tested)
> -Dell Inspiron 4000		??? (*)
> -Dell Inspiron 500m		??? (*)
> +Dell D610			vga=normal and X (possibly vbestate (6) too,
> +				but not tested)
> +Dell Inspiron 4000		??? [#f1]_
> +Dell Inspiron 500m		??? [#f1]_
>  Dell Inspiron 510m		???
>  Dell Inspiron 5150		vbetool needed (6)
> -Dell Inspiron 600m		??? (*)
> -Dell Inspiron 8200		??? (*)
> -Dell Inspiron 8500		??? (*)
> -Dell Inspiron 8600		??? (*)
> -eMachines athlon64 machines	vbetool needed (6) (someone please get me model #s)
> -HP NC6000			s3_bios, may not use radeonfb (2); or vbetool (6)
> -HP NX7000			??? (*)
> -HP Pavilion ZD7000		vbetool post needed, need open-source nv driver for X
> +Dell Inspiron 600m		??? [#f1]_
> +Dell Inspiron 8200		??? [#f1]_
> +Dell Inspiron 8500		??? [#f1]_
> +Dell Inspiron 8600		??? [#f1]_
> +eMachines athlon64 machines	vbetool needed (6) (someone please get
> +				me model #s)
> +HP NC6000			s3_bios, may not use radeonfb (2);
> +				or vbetool (6)
> +HP NX7000			??? [#f1]_
> +HP Pavilion ZD7000		vbetool post needed, need open-source nv
> +				driver for X
>  HP Omnibook XE3	athlon version	none (1)
>  HP Omnibook XE3GC		none (1), video is S3 Savage/IX-MV
>  HP Omnibook XE3L-GF		vbetool (6)
>  HP Omnibook 5150		none (1), (S1 also works OK)
> -IBM TP T20, model 2647-44G	none (1), video is S3 Inc. 86C270-294 Savage/IX-MV, vesafb gets "interesting" but X work.
> -IBM TP A31 / Type 2652-M5G      s3_mode (3) [works ok with BIOS 1.04 2002-08-23, but not at all with BIOS 1.11 2004-11-05 :-(]
> +IBM TP T20, model 2647-44G	none (1), video is S3 Inc. 86C270-294
> +				Savage/IX-MV, vesafb gets "interesting"
> +				but X work.
> +IBM TP A31 / Type 2652-M5G      s3_mode (3) [works ok with
> +				BIOS 1.04 2002-08-23, but not at all with
> +				BIOS 1.11 2004-11-05 :-(]
>  IBM TP R32 / Type 2658-MMG      none (1)
> -IBM TP R40 2722B3G		??? (*)
> +IBM TP R40 2722B3G		??? [#f1]_
>  IBM TP R50p / Type 1832-22U     s3_bios (2)
>  IBM TP R51			none (1)
> -IBM TP T30	236681A		??? (*)
> +IBM TP T30	236681A		??? [#f1]_
>  IBM TP T40 / Type 2373-MU4      none (1)
>  IBM TP T40p			none (1)
>  IBM TP R40p			s3_bios (2)
>  IBM TP T41p			s3_bios (2), switch to X after resume
>  IBM TP T42			s3_bios (2)
>  IBM ThinkPad T42p (2373-GTG)	s3_bios (2)
> -IBM TP X20			??? (*)
> +IBM TP X20			??? [#f1]_
>  IBM TP X30			s3_bios, s3_mode (4)
> -IBM TP X31 / Type 2672-XXH      none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
> -IBM TP X32			none (1), but backlight is on and video is trashed after long suspend. s3_bios,s3_mode (4) works too. Perhaps that gets better results?
> +IBM TP X31 / Type 2672-XXH      none (1), use radeontool
> +				(http://fdd.com/software/radeon/) to
> +				turn off backlight.
> +IBM TP X32			none (1), but backlight is on and video is
> +				trashed after long suspend. s3_bios,
> +				s3_mode (4) works too. Perhaps that gets
> +				better results?
>  IBM Thinkpad X40 Type 2371-7JG  s3_bios,s3_mode (4)
> -IBM TP 600e			none(1), but a switch to console and back to X is needed
> -Medion MD4220			??? (*)
> +IBM TP 600e			none(1), but a switch to console and
> +				back to X is needed
> +Medion MD4220			??? [#f1]_
>  Samsung P35			vbetool needed (6)
>  Sharp PC-AR10 (ATI rage)	none (1), backlight does not switch off
>  Sony Vaio PCG-C1VRX/K		s3_bios (2)
> -Sony Vaio PCG-F403		??? (*)
> +Sony Vaio PCG-F403		??? [#f1]_
>  Sony Vaio PCG-GRT995MP		none (1), works with 'nv' X driver
> -Sony Vaio PCG-GR7/K		none (1), but needs radeonfb, use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
> -Sony Vaio PCG-N505SN		??? (*)
> +Sony Vaio PCG-GR7/K		none (1), but needs radeonfb, use
> +				radeontool (http://fdd.com/software/radeon/)
> +				to turn off backlight.
> +Sony Vaio PCG-N505SN		??? [#f1]_
>  Sony Vaio vgn-s260		X or boot-radeon can init it (5)
> -Sony Vaio vgn-S580BH		vga=normal, but suspend from X. Console will be blank unless you return to X.
> +Sony Vaio vgn-S580BH		vga=normal, but suspend from X. Console will
> +				be blank unless you return to X.
>  Sony Vaio vgn-FS115B		s3_bios (2),s3_mode (4)
>  Toshiba Libretto L5		none (1)
>  Toshiba Libretto 100CT/110CT    vbetool (6)
>  Toshiba Portege 3020CT		s3_mode (3)
>  Toshiba Satellite 4030CDT	s3_mode (3) (S1 also works OK)
>  Toshiba Satellite 4080XCDT      s3_mode (3) (S1 also works OK)
> -Toshiba Satellite 4090XCDT      ??? (*)
> -Toshiba Satellite P10-554       s3_bios,s3_mode (4)(****)
> +Toshiba Satellite 4090XCDT      ??? [#f1]_
> +Toshiba Satellite P10-554       s3_bios,s3_mode (4)[#f3]_
>  Toshiba M30                     (2) xor X with nvidia driver using internal AGP
> -Uniwill 244IIO			??? (*)
> +Uniwill 244IIO			??? [#f1]_
> +=============================== ===============================================
>  
>  Known working desktop systems
>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>  
> +=================== ============================= ========================
>  Mainboard	    Graphics card                 hack (or "how to do it")
> -------------------------------------------------------------------------------
> +=================== ============================= ========================
>  Asus A7V8X	    nVidia RIVA TNT2 model 64	  s3_bios,s3_mode (4)
> +=================== ============================= ========================
>  
>  
> -(*) from https://wiki.ubuntu.com/HoaryPMResults, not sure
> -    which options to use. If you know, please tell me.
> +.. [#f1] from https://wiki.ubuntu.com/HoaryPMResults, not sure
> +         which options to use. If you know, please tell me.
>  
> -(***) To be tested with a newer kernel.
> +.. [#f2] To be tested with a newer kernel.
>  
> -(****) Not with SMP kernel, UP only.
> +.. [#f3] Not with SMP kernel, UP only.
> diff --git a/Documentation/process/submitting-drivers.rst b/Documentation/process/submitting-drivers.rst
> index 58bc047e7b95..1acaa14903d6 100644
> --- a/Documentation/process/submitting-drivers.rst
> +++ b/Documentation/process/submitting-drivers.rst
> @@ -117,7 +117,7 @@ PM support:
>  		implemented") error.  You should also try to make sure that your
>  		driver uses as little power as possible when it's not doing
>  		anything.  For the driver testing instructions see
> -		Documentation/power/drivers-testing.txt and for a relatively
> +		Documentation/power/drivers-testing.rst and for a relatively
>  		complete overview of the power management issues related to
>  		drivers see :ref:`Documentation/driver-api/pm/devices.rst <driverapi_pm_devices>`.
>  
> diff --git a/Documentation/scheduler/sched-energy.txt b/Documentation/scheduler/sched-energy.txt
> index 197d81f4b836..d97207b9accb 100644
> --- a/Documentation/scheduler/sched-energy.txt
> +++ b/Documentation/scheduler/sched-energy.txt
> @@ -22,7 +22,7 @@ the highest.
>  
>  The actual EM used by EAS is _not_ maintained by the scheduler, but by a
>  dedicated framework. For details about this framework and what it provides,
> -please refer to its documentation (see Documentation/power/energy-model.txt).
> +please refer to its documentation (see Documentation/power/energy-model.rst).
>  
>  
>  2. Background and Terminology
> @@ -81,7 +81,7 @@ through the arch_scale_cpu_capacity() callback.
>  
>  The rest of platform knowledge used by EAS is directly read from the Energy
>  Model (EM) framework. The EM of a platform is composed of a power cost table
> -per 'performance domain' in the system (see Documentation/power/energy-model.txt
> +per 'performance domain' in the system (see Documentation/power/energy-model.rst
>  for futher details about performance domains).
>  
>  The scheduler manages references to the EM objects in the topology code when the
> @@ -352,7 +352,7 @@ could be amended in the future if proven otherwise.
>  EAS uses the EM of a platform to estimate the impact of scheduling decisions on
>  energy. So, your platform must provide power cost tables to the EM framework in
>  order to make EAS start. To do so, please refer to documentation of the
> -independent EM framework in Documentation/power/energy-model.txt.
> +independent EM framework in Documentation/power/energy-model.rst.
>  
>  Please also note that the scheduling domains need to be re-built after the
>  EM has been registered in order to start EAS.
> diff --git a/Documentation/trace/coresight-cpu-debug.txt b/Documentation/trace/coresight-cpu-debug.txt
> index f07e38094b40..1a660a39e3c0 100644
> --- a/Documentation/trace/coresight-cpu-debug.txt
> +++ b/Documentation/trace/coresight-cpu-debug.txt
> @@ -151,7 +151,7 @@ At the runtime you can disable idle states with below methods:
>  
>  It is possible to disable CPU idle states by way of the PM QoS
>  subsystem, more specifically by using the "/dev/cpu_dma_latency"
> -interface (see Documentation/power/pm_qos_interface.txt for more
> +interface (see Documentation/power/pm_qos_interface.rst for more
>  details).  As specified in the PM QoS documentation the requested
>  parameter will stay in effect until the file descriptor is released.
>  For example:
> diff --git a/Documentation/translations/zh_CN/process/submitting-drivers.rst b/Documentation/translations/zh_CN/process/submitting-drivers.rst
> index 72c6cd935821..f1c3906c69a8 100644
> --- a/Documentation/translations/zh_CN/process/submitting-drivers.rst
> +++ b/Documentation/translations/zh_CN/process/submitting-drivers.rst
> @@ -97,7 +97,7 @@ Linux 2.6:
>  		函数定义成返回 -ENOSYS(功能未实现)错误。你还应该尝试确
>  		保你的驱动在什么都不干的情况下将耗电降到最低。要获得驱动
>  		程序测试的指导,请参阅
> -		Documentation/power/drivers-testing.txt。有关驱动程序电
> +		Documentation/power/drivers-testing.rst。有关驱动程序电
>  		源管理问题相对全面的概述,请参阅
>  		Documentation/driver-api/pm/devices.rst。
>  
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5fdbf6e78d46..1c9ed0a5a9df 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6491,7 +6491,7 @@ M:	"Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
>  M:	Pavel Machek <pavel@xxxxxx>
>  L:	linux-pm@xxxxxxxxxxxxxxx
>  S:	Supported
> -F:	Documentation/power/freezing-of-tasks.txt
> +F:	Documentation/power/freezing-of-tasks.rst
>  F:	include/linux/freezer.h
>  F:	kernel/freezer.c
>  
> @@ -11825,7 +11825,7 @@ S:	Maintained
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
>  F:	drivers/opp/
>  F:	include/linux/pm_opp.h
> -F:	Documentation/power/opp.txt
> +F:	Documentation/power/opp.rst
>  F:	Documentation/devicetree/bindings/opp/
>  
>  OPL4 DRIVER
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index a109141a8d3b..bc5e1c218d4d 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -2448,7 +2448,7 @@ menuconfig APM
>  	  machines with more than one CPU.
>  
>  	  In order to use APM, you will need supporting software. For location
> -	  and more information, read <file:Documentation/power/apm-acpi.txt>
> +	  and more information, read <file:Documentation/power/apm-acpi.rst>
>  	  and the Battery Powered Linux mini-HOWTO, available from
>  	  <http://www.tldp.org/docs.html#howto>.
>  
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 0ea7f78ae227..eeb7edfa3597 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1069,7 +1069,7 @@ struct skl_wm_params {
>   * to be disabled. This shouldn't happen and we'll print some error messages in
>   * case it happens.
>   *
> - * For more, read the Documentation/power/runtime_pm.txt.
> + * For more, read the Documentation/power/runtime_pm.rst.
>   */
>  struct i915_runtime_pm {
>  	atomic_t wakeref_count;
> diff --git a/drivers/opp/Kconfig b/drivers/opp/Kconfig
> index fe54d349d2e1..35dfc7e80f92 100644
> --- a/drivers/opp/Kconfig
> +++ b/drivers/opp/Kconfig
> @@ -11,4 +11,4 @@ config PM_OPP
>  	  OPP layer organizes the data internally using device pointers
>  	  representing individual voltage domains and provides SOC
>  	  implementations a ready to use framework to manage OPPs.
> -	  For more information, read <file:Documentation/power/opp.txt>
> +	  For more information, read <file:Documentation/power/opp.rst>
> diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
> index 136e8f64848a..b55cdfe22a2e 100644
> --- a/drivers/power/supply/power_supply_core.c
> +++ b/drivers/power/supply/power_supply_core.c
> @@ -606,7 +606,7 @@ int power_supply_get_battery_info(struct power_supply *psy,
>  
>  	/* The property and field names below must correspond to elements
>  	 * in enum power_supply_property. For reasoning, see
> -	 * Documentation/power/power_supply_class.txt.
> +	 * Documentation/power/power_supply_class.rst.
>  	 */
>  
>  	of_property_read_u32(battery_np, "energy-full-design-microwatt-hours",
> diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
> index c7eef32e7739..5b8328a99b2a 100644
> --- a/include/linux/interrupt.h
> +++ b/include/linux/interrupt.h
> @@ -52,7 +52,7 @@
>   *                irq line disabled until the threaded handler has been run.
>   * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend.  Does not guarantee
>   *                   that this interrupt will wake the system from a suspended
> - *                   state.  See Documentation/power/suspend-and-interrupts.txt
> + *                   state.  See Documentation/power/suspend-and-interrupts.rst
>   * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set
>   * IRQF_NO_THREAD - Interrupt cannot be threaded
>   * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 44d254548ca7..41c5673aba2f 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -808,7 +808,7 @@ struct module;
>   * @suspend_late: Put device into low power state.
>   * @resume_early: Wake device from low power state.
>   * @resume:	Wake device from low power state.
> - *		(Please see Documentation/power/pci.txt for descriptions
> + *		(Please see Documentation/power/pci.rst for descriptions
>   *		of PCI Power Management and the related functions.)
>   * @shutdown:	Hook into reboot_notifier_list (kernel/sys.c).
>   *		Intended to stop any idling DMA operations.
> diff --git a/include/linux/pm.h b/include/linux/pm.h
> index 345d74a727e3..220e2008467d 100644
> --- a/include/linux/pm.h
> +++ b/include/linux/pm.h
> @@ -271,7 +271,7 @@ typedef struct pm_message {
>   * actions to be performed by a device driver's callbacks generally depend on
>   * the platform and subsystem the device belongs to.
>   *
> - * Refer to Documentation/power/runtime_pm.txt for more information about the
> + * Refer to Documentation/power/runtime_pm.rst for more information about the
>   * role of the @runtime_suspend(), @runtime_resume() and @runtime_idle()
>   * callbacks in device runtime power management.
>   */
> diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
> index ff8592ddedee..d3667b4075c1 100644
> --- a/kernel/power/Kconfig
> +++ b/kernel/power/Kconfig
> @@ -66,7 +66,7 @@ config HIBERNATION
>  	  need to run mkswap against the swap partition used for the suspend.
>  
>  	  It also works with swap files to a limited extent (for details see
> -	  <file:Documentation/power/swsusp-and-swap-files.txt>).
> +	  <file:Documentation/power/swsusp-and-swap-files.rst>).
>  
>  	  Right now you may boot without resuming and resume later but in the
>  	  meantime you cannot use the swap partition(s)/file(s) involved in
> @@ -75,7 +75,7 @@ config HIBERNATION
>  	  MOUNT any journaled filesystems mounted before the suspend or they
>  	  will get corrupted in a nasty way.
>  
> -	  For more information take a look at <file:Documentation/power/swsusp.txt>.
> +	  For more information take a look at <file:Documentation/power/swsusp.rst>.
>  
>  config ARCH_SAVE_PAGE_KEYS
>  	bool
> @@ -256,7 +256,7 @@ config APM_EMULATION
>  	  notification of APM "events" (e.g. battery status change).
>  
>  	  In order to use APM, you will need supporting software. For location
> -	  and more information, read <file:Documentation/power/apm-acpi.txt>
> +	  and more information, read <file:Documentation/power/apm-acpi.rst>
>  	  and the Battery Powered Linux mini-HOWTO, available from
>  	  <http://www.tldp.org/docs.html#howto>.
>  
> diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
> index 6310ddede220..cc70f5932773 100644
> --- a/net/wireless/Kconfig
> +++ b/net/wireless/Kconfig
> @@ -166,7 +166,7 @@ config CFG80211_DEFAULT_PS
>  
>  	  If this causes your applications to misbehave you should fix your
>  	  applications instead -- they need to register their network
> -	  latency requirement, see Documentation/power/pm_qos_interface.txt.
> +	  latency requirement, see Documentation/power/pm_qos_interface.rst.
>  
>  config CFG80211_DEBUGFS
>  	bool "cfg80211 DebugFS entries"
> -- 
> 2.21.0
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux