[PATCH 4/4] backlight: pwm_bl: Set scale type for brightness curves specified in the DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Check if a brightness curve specified in the device tree is linear or
not and set the corresponding property accordingly. This makes the
scale type available to userspace via the 'scale' sysfs attribute.

To determine if a curve is linear it is compared to a interpolated linear
curve between min and max brightness. The curve is considered linear if
no value deviates more than +/-5% of ${brightness_range} from their
interpolated value.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
 drivers/video/backlight/pwm_bl.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index f067fe7aa35d..912407b6d67f 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -404,6 +404,26 @@ int pwm_backlight_brightness_default(struct device *dev,
 }
 #endif
 
+static bool pwm_backlight_is_linear(struct platform_pwm_backlight_data *data)
+{
+	unsigned int nlevels = data->max_brightness + 1;
+	unsigned int min_val = data->levels[0];
+	unsigned int max_val = data->levels[nlevels - 1];
+	unsigned int slope = (100 * (max_val - min_val)) / nlevels;
+	unsigned int margin = (max_val - min_val) / 20; /* 5% */
+	int i;
+
+	for (i = 1; i < nlevels; i++) {
+		unsigned int linear_value = min_val + ((i * slope) / 100);
+		unsigned int delta = abs(linear_value - data->levels[i]);
+
+		if (delta > margin)
+			return false;
+	}
+
+	return true;
+}
+
 static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
 {
 	struct device_node *node = pb->dev->of_node;
@@ -567,6 +587,11 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 
 			pb->levels = data->levels;
 		}
+
+		if (pwm_backlight_is_linear(data))
+			props.scale = BACKLIGHT_SCALE_LINEAR;
+		else
+			props.scale = BACKLIGHT_SCALE_NON_LINEAR;
 	} else if (!data->max_brightness) {
 		/*
 		 * If no brightness levels are provided and max_brightness is
-- 
2.22.0.rc2.383.gf4fbbf30c2-goog

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux