On 04.06.2019 14:22, Torsten Duwe wrote:
> Add bit definitions required for the anx6345 and add a
> sanity check in anx_dp_aux_transfer.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> Signed-off-by: Torsten Duwe <duwe@xxxxxxx>
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
--
Regards
Andrzej
> ---
> drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c | 2 +-
> drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h | 8 ++++++++
> drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h | 3 +++
> 3 files changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
> index d6016f789d80..e9d2ed4d410d 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
> @@ -124,7 +124,7 @@ ssize_t anx_dp_aux_transfer(struct regmap *map_dptx,
> else /* For non-zero-sized set the length field. */
> ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
>
> - if ((msg->request & DP_AUX_I2C_READ) == 0) {
> + if ((msg->size > 0) && ((msg->request & DP_AUX_I2C_READ) == 0)) {
> /* When WRITE | MOT write values to data buffer */
> err = regmap_bulk_write(map_dptx,
> SP_DP_BUF_DATA0_REG, buffer,
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
> index 30436c88f181..95ab89eecc60 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
> @@ -83,7 +83,11 @@
> #define SP_CHA_STA BIT(2)
> /* Bits for DP System Control Register 3 */
> #define SP_HPD_STATUS BIT(6)
> +#define SP_HPD_FORCE BIT(5)
> +#define SP_HPD_CTRL BIT(4)
> #define SP_STRM_VALID BIT(2)
> +#define SP_STRM_FORCE BIT(1)
> +#define SP_STRM_CTRL BIT(0)
> /* Bits for DP System Control Register 4 */
> #define SP_ENHANCED_MODE BIT(3)
>
> @@ -128,6 +132,9 @@
> #define SP_LINK_BW_SET_MASK 0x1f
> #define SP_INITIAL_SLIM_M_AUD_SEL BIT(5)
>
> +/* DP Lane Count Setting Register */
> +#define SP_DP_LANE_COUNT_SET_REG 0xa1
> +
> /* DP Training Pattern Set Register */
> #define SP_DP_TRAINING_PATTERN_SET_REG 0xa2
>
> @@ -141,6 +148,7 @@
>
> /* DP Link Training Control Register */
> #define SP_DP_LT_CTRL_REG 0xa8
> +#define SP_DP_LT_INPROGRESS 0x80
> #define SP_LT_ERROR_TYPE_MASK 0x70
> # define SP_LT_NO_ERROR 0x00
> # define SP_LT_AUX_WRITE_ERROR 0x01
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
> index f48293f86f9d..e3391a50b5d1 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
> @@ -188,6 +188,9 @@
> #define SP_VBIT BIT(1)
> #define SP_AUDIO_LAYOUT BIT(0)
>
> +/* Analog Debug Register 1 */
> +#define SP_ANALOG_DEBUG1_REG 0xdc
> +
> /* Analog Debug Register 2 */
> #define SP_ANALOG_DEBUG2_REG 0xdd
> #define SP_FORCE_SW_OFF_BYPASS 0x20
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
