Re: [PATCH v2 2/7] drm/bridge: split some definitions of ANX78xx to dedicated headers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04.06.2019 14:22, Torsten Duwe wrote:
> From: Icenowy Zheng <icenowy@xxxxxxx>
>
> Some definitions currently in analogix-anx78xx.h are not restricted to
> the ANX78xx series, but also applicable to other DisplayPort
> transmitters by Analogix.
>
> Split out them to dedicated headers, and make analogix-anx78xx.h include
> them.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> Signed-off-by: Torsten Duwe <duwe@xxxxxxx>
> ---
>  drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h | 465 +--------------------
>  .../gpu/drm/bridge/analogix/analogix-i2c-dptx.h    | 256 ++++++++++++
>  .../drm/bridge/analogix/analogix-i2c-txcommon.h    | 242 +++++++++++
>  3 files changed, 503 insertions(+), 460 deletions(-)
>  create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
>  create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
> index 38753c870137..3fbe2c3244fd 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
> @@ -11,13 +11,15 @@
>   * GNU General Public License for more details.
>   *
>   */
> -
>  #ifndef __ANX78xx_H
>  #define __ANX78xx_H
>  
> -#define TX_P0				0x70
> +#include "analogix-i2c-dptx.h"
> +#include "analogix-i2c-txcommon.h"
> +
> +#define TX_P0				ANALOGIX_I2C_DPTX
>  #define TX_P1				0x7a
> -#define TX_P2				0x72
> +#define TX_P2				ANALOGIX_I2C_TXCOMMON
>  
>  #define RX_P0				0x7e
>  #define RX_P1				0x80
> @@ -225,463 +227,6 @@
>  #define SP_CLEAR_AVMUTE			BIT(4)
>  #define SP_SET_AVMUTE			BIT(0)
>  
> -/***************************************************************/
> -/* Register definition of device address 0x70                  */
> -/***************************************************************/
> -
> -/* HDCP Status Register */
> -#define SP_TX_HDCP_STATUS_REG		0x00
> -#define SP_AUTH_FAIL			BIT(5)
> -#define SP_AUTHEN_PASS			BIT(1)
> -
> -/* HDCP Control Register 0 */
> -#define SP_HDCP_CTRL0_REG		0x01
> -#define SP_RX_REPEATER			BIT(6)
> -#define SP_RE_AUTH			BIT(5)
> -#define SP_SW_AUTH_OK			BIT(4)
> -#define SP_HARD_AUTH_EN			BIT(3)
> -#define SP_HDCP_ENC_EN			BIT(2)
> -#define SP_BKSV_SRM_PASS		BIT(1)
> -#define SP_KSVLIST_VLD			BIT(0)
> -/* HDCP Function Enabled */
> -#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
> -
> -/* HDCP Receiver BSTATUS Register 0 */
> -#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
> -/* HDCP Receiver BSTATUS Register 1 */
> -#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
> -
> -/* HDCP Embedded "Blue Screen" Content Registers */
> -#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
> -#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
> -#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
> -
> -/* HDCP Wait R0 Timing Register */
> -#define SP_HDCP_WAIT_R0_TIME_REG	0x40
> -
> -/* HDCP Link Integrity Check Timer Register */
> -#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
> -
> -/* HDCP Repeater Ready Wait Timer Register */
> -#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
> -
> -/* HDCP Auto Timer Register */
> -#define SP_HDCP_AUTO_TIMER_REG		0x51
> -
> -/* HDCP Key Status Register */
> -#define SP_HDCP_KEY_STATUS_REG		0x5e
> -
> -/* HDCP Key Command Register */
> -#define SP_HDCP_KEY_COMMAND_REG		0x5f
> -#define SP_DISABLE_SYNC_HDCP		BIT(2)
> -
> -/* OTP Memory Key Protection Registers */
> -#define SP_OTP_KEY_PROTECT1_REG		0x60
> -#define SP_OTP_KEY_PROTECT2_REG		0x61
> -#define SP_OTP_KEY_PROTECT3_REG		0x62
> -#define SP_OTP_PSW1			0xa2
> -#define SP_OTP_PSW2			0x7e
> -#define SP_OTP_PSW3			0xc6
> -
> -/* DP System Control Registers */
> -#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
> -/* Bits for DP System Control Register 2 */
> -#define SP_CHA_STA			BIT(2)
> -/* Bits for DP System Control Register 3 */
> -#define SP_HPD_STATUS			BIT(6)
> -#define SP_STRM_VALID			BIT(2)
> -/* Bits for DP System Control Register 4 */
> -#define SP_ENHANCED_MODE		BIT(3)
> -
> -/* DP Video Control Register */
> -#define SP_DP_VIDEO_CTRL_REG		0x84
> -#define SP_COLOR_F_MASK			0x06
> -#define SP_COLOR_F_SHIFT		1
> -#define SP_BPC_MASK			0xe0
> -#define SP_BPC_SHIFT			5
> -#  define SP_BPC_6BITS			0x00
> -#  define SP_BPC_8BITS			0x01
> -#  define SP_BPC_10BITS			0x02
> -#  define SP_BPC_12BITS			0x03
> -
> -/* DP Audio Control Register */
> -#define SP_DP_AUDIO_CTRL_REG		0x87
> -#define SP_AUD_EN			BIT(0)
> -
> -/* 10us Pulse Generate Timer Registers */
> -#define SP_I2C_GEN_10US_TIMER0_REG	0x88
> -#define SP_I2C_GEN_10US_TIMER1_REG	0x89
> -
> -/* Packet Send Control Register */
> -#define SP_PACKET_SEND_CTRL_REG		0x90
> -#define SP_AUD_IF_UP			BIT(7)
> -#define SP_AVI_IF_UD			BIT(6)
> -#define SP_MPEG_IF_UD			BIT(5)
> -#define SP_SPD_IF_UD			BIT(4)
> -#define SP_AUD_IF_EN			BIT(3)
> -#define SP_AVI_IF_EN			BIT(2)
> -#define SP_MPEG_IF_EN			BIT(1)
> -#define SP_SPD_IF_EN			BIT(0)
> -
> -/* DP HDCP Control Register */
> -#define SP_DP_HDCP_CTRL_REG		0x92
> -#define SP_AUTO_EN			BIT(7)
> -#define SP_AUTO_START			BIT(5)
> -#define SP_LINK_POLLING			BIT(1)
> -
> -/* DP Main Link Bandwidth Setting Register */
> -#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
> -#define SP_LINK_BW_SET_MASK		0x1f
> -#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
> -
> -/* DP Training Pattern Set Register */
> -#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
> -
> -/* DP Lane 0 Link Training Control Register */
> -#define SP_DP_LANE0_LT_CTRL_REG		0xa3
> -#define SP_TX_SW_SET_MASK		0x1b
> -#define SP_MAX_PRE_REACH		BIT(5)
> -#define SP_MAX_DRIVE_REACH		BIT(4)
> -#define SP_PRE_EMP_LEVEL1		BIT(3)
> -#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
> -
> -/* DP Link Training Control Register */
> -#define SP_DP_LT_CTRL_REG		0xa8
> -#define SP_LT_ERROR_TYPE_MASK		0x70
> -#  define SP_LT_NO_ERROR		0x00
> -#  define SP_LT_AUX_WRITE_ERROR		0x01
> -#  define SP_LT_MAX_DRIVE_REACHED	0x02
> -#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
> -#  define SP_LT_LOOP_SAME_5_TIME	0x04
> -#  define SP_LT_CR_FAIL_IN_EQ		0x05
> -#  define SP_LT_EQ_LOOP_5_TIME		0x06
> -#define SP_LT_EN			BIT(0)
> -
> -/* DP CEP Training Control Registers */
> -#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
> -#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
> -
> -/* DP Debug Register 1 */
> -#define SP_DP_DEBUG1_REG		0xb0
> -#define SP_DEBUG_PLL_LOCK		BIT(4)
> -#define SP_POLLING_EN			BIT(1)
> -
> -/* DP Polling Control Register */
> -#define SP_DP_POLLING_CTRL_REG		0xb4
> -#define SP_AUTO_POLLING_DISABLE		BIT(0)
> -
> -/* DP Link Debug Control Register */
> -#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
> -#define SP_M_VID_DEBUG			BIT(5)
> -#define SP_NEW_PRBS7			BIT(4)
> -#define SP_INSERT_ER			BIT(1)
> -#define SP_PRBS31_EN			BIT(0)
> -
> -/* AUX Misc control Register */
> -#define SP_AUX_MISC_CTRL_REG		0xbf
> -
> -/* DP PLL control Register */
> -#define SP_DP_PLL_CTRL_REG		0xc7
> -#define SP_PLL_RST			BIT(6)
> -
> -/* DP Analog Power Down Register */
> -#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
> -#define SP_CH0_PD			BIT(0)
> -
> -/* DP Misc Control Register */
> -#define SP_DP_MISC_CTRL_REG		0xcd
> -#define SP_EQ_TRAINING_LOOP		BIT(6)
> -
> -/* DP Extra I2C Device Address Register */
> -#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
> -#define SP_I2C_STRETCH_DISABLE		BIT(7)
> -
> -#define SP_I2C_EXTRA_ADDR		0x50
> -
> -/* DP Downspread Control Register 1 */
> -#define SP_DP_DOWNSPREAD_CTRL1_REG	0xd0
> -
> -/* DP M Value Calculation Control Register */
> -#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
> -#define SP_M_GEN_CLK_SEL		BIT(0)
> -
> -/* AUX Channel Access Status Register */
> -#define SP_AUX_CH_STATUS_REG		0xe0
> -#define SP_AUX_STATUS			0x0f
> -
> -/* AUX Channel DEFER Control Register */
> -#define SP_AUX_DEFER_CTRL_REG		0xe2
> -#define SP_DEFER_CTRL_EN		BIT(7)
> -
> -/* DP Buffer Data Count Register */
> -#define SP_BUF_DATA_COUNT_REG		0xe4
> -#define SP_BUF_DATA_COUNT_MASK		0x1f
> -#define SP_BUF_CLR			BIT(7)
> -
> -/* DP AUX Channel Control Register 1 */
> -#define SP_DP_AUX_CH_CTRL1_REG		0xe5
> -#define SP_AUX_TX_COMM_MASK		0x0f
> -#define SP_AUX_LENGTH_MASK		0xf0
> -#define SP_AUX_LENGTH_SHIFT		4
> -
> -/* DP AUX CH Address Register 0 */
> -#define SP_AUX_ADDR_7_0_REG		0xe6
> -
> -/* DP AUX CH Address Register 1 */
> -#define SP_AUX_ADDR_15_8_REG		0xe7
> -
> -/* DP AUX CH Address Register 2 */
> -#define SP_AUX_ADDR_19_16_REG		0xe8
> -#define SP_AUX_ADDR_19_16_MASK		0x0f
> -
> -/* DP AUX Channel Control Register 2 */
> -#define SP_DP_AUX_CH_CTRL2_REG		0xe9
> -#define SP_AUX_SEL_RXCM			BIT(6)
> -#define SP_AUX_CHSEL			BIT(3)
> -#define SP_AUX_PN_INV			BIT(2)
> -#define SP_ADDR_ONLY			BIT(1)
> -#define SP_AUX_EN			BIT(0)
> -
> -/* DP Video Stream Control InfoFrame Register */
> -#define SP_DP_3D_VSC_CTRL_REG		0xea
> -#define SP_INFO_FRAME_VSC_EN		BIT(0)
> -
> -/* DP Video Stream Data Byte 1 Register */
> -#define SP_DP_VSC_DB1_REG		0xeb
> -
> -/* DP AUX Channel Control Register 3 */
> -#define SP_DP_AUX_CH_CTRL3_REG		0xec
> -#define SP_WAIT_COUNTER_7_0_MASK	0xff
> -
> -/* DP AUX Channel Control Register 4 */
> -#define SP_DP_AUX_CH_CTRL4_REG		0xed
> -
> -/* DP AUX Buffer Data Registers */
> -#define SP_DP_BUF_DATA0_REG		0xf0
> -
> -/***************************************************************/
> -/* Register definition of device address 0x72                  */
> -/***************************************************************/
> -
> -/*
> - * Core Register Definitions
> - */
> -
> -/* Device ID Low Byte Register */
> -#define SP_DEVICE_IDL_REG		0x02
> -
> -/* Device ID High Byte Register */
> -#define SP_DEVICE_IDH_REG		0x03
> -
> -/* Device version register */
> -#define SP_DEVICE_VERSION_REG		0x04
> -
> -/* Power Down Control Register */
> -#define SP_POWERDOWN_CTRL_REG		0x05
> -#define SP_REGISTER_PD			BIT(7)
> -#define SP_HDCP_PD			BIT(5)
> -#define SP_AUDIO_PD			BIT(4)
> -#define SP_VIDEO_PD			BIT(3)
> -#define SP_LINK_PD			BIT(2)
> -#define SP_TOTAL_PD			BIT(1)
> -
> -/* Reset Control Register 1 */
> -#define SP_RESET_CTRL1_REG		0x06
> -#define SP_MISC_RST			BIT(7)
> -#define SP_VIDCAP_RST			BIT(6)
> -#define SP_VIDFIF_RST			BIT(5)
> -#define SP_AUDFIF_RST			BIT(4)
> -#define SP_AUDCAP_RST			BIT(3)
> -#define SP_HDCP_RST			BIT(2)
> -#define SP_SW_RST			BIT(1)
> -#define SP_HW_RST			BIT(0)
> -
> -/* Reset Control Register 2 */
> -#define SP_RESET_CTRL2_REG		0x07
> -#define SP_AUX_RST			BIT(2)
> -#define SP_SERDES_FIFO_RST		BIT(1)
> -#define SP_I2C_REG_RST			BIT(0)
> -
> -/* Video Control Register 1 */
> -#define SP_VID_CTRL1_REG		0x08
> -#define SP_VIDEO_EN			BIT(7)
> -#define SP_VIDEO_MUTE			BIT(2)
> -#define SP_DE_GEN			BIT(1)
> -#define SP_DEMUX			BIT(0)
> -
> -/* Video Control Register 2 */
> -#define SP_VID_CTRL2_REG		0x09
> -#define SP_IN_COLOR_F_MASK		0x03
> -#define SP_IN_YC_BIT_SEL		BIT(2)
> -#define SP_IN_BPC_MASK			0x70
> -#define SP_IN_BPC_SHIFT			4
> -#  define SP_IN_BPC_12BIT		0x03
> -#  define SP_IN_BPC_10BIT		0x02
> -#  define SP_IN_BPC_8BIT		0x01
> -#  define SP_IN_BPC_6BIT		0x00
> -#define SP_IN_D_RANGE			BIT(7)
> -
> -/* Video Control Register 3 */
> -#define SP_VID_CTRL3_REG		0x0a
> -#define SP_HPD_OUT			BIT(6)
> -
> -/* Video Control Register 5 */
> -#define SP_VID_CTRL5_REG		0x0c
> -#define SP_CSC_STD_SEL			BIT(7)
> -#define SP_XVYCC_RNG_LMT		BIT(6)
> -#define SP_RANGE_Y2R			BIT(5)
> -#define SP_CSPACE_Y2R			BIT(4)
> -#define SP_RGB_RNG_LMT			BIT(3)
> -#define SP_Y_RNG_LMT			BIT(2)
> -#define SP_RANGE_R2Y			BIT(1)
> -#define SP_CSPACE_R2Y			BIT(0)
> -
> -/* Video Control Register 6 */
> -#define SP_VID_CTRL6_REG		0x0d
> -#define SP_TEST_PATTERN_EN		BIT(7)
> -#define SP_VIDEO_PROCESS_EN		BIT(6)
> -#define SP_VID_US_MODE			BIT(3)
> -#define SP_VID_DS_MODE			BIT(2)
> -#define SP_UP_SAMPLE			BIT(1)
> -#define SP_DOWN_SAMPLE			BIT(0)
> -
> -/* Video Control Register 8 */
> -#define SP_VID_CTRL8_REG		0x0f
> -#define SP_VID_VRES_TH			BIT(0)
> -
> -/* Total Line Status Low Byte Register */
> -#define SP_TOTAL_LINE_STAL_REG		0x24
> -
> -/* Total Line Status High Byte Register */
> -#define SP_TOTAL_LINE_STAH_REG		0x25
> -
> -/* Active Line Status Low Byte Register */
> -#define SP_ACT_LINE_STAL_REG		0x26
> -
> -/* Active Line Status High Byte Register */
> -#define SP_ACT_LINE_STAH_REG		0x27
> -
> -/* Vertical Front Porch Status Register */
> -#define SP_V_F_PORCH_STA_REG		0x28
> -
> -/* Vertical SYNC Width Status Register */
> -#define SP_V_SYNC_STA_REG		0x29
> -
> -/* Vertical Back Porch Status Register */
> -#define SP_V_B_PORCH_STA_REG		0x2a
> -
> -/* Total Pixel Status Low Byte Register */
> -#define SP_TOTAL_PIXEL_STAL_REG		0x2b
> -
> -/* Total Pixel Status High Byte Register */
> -#define SP_TOTAL_PIXEL_STAH_REG		0x2c
> -
> -/* Active Pixel Status Low Byte Register */
> -#define SP_ACT_PIXEL_STAL_REG		0x2d
> -
> -/* Active Pixel Status High Byte Register */
> -#define SP_ACT_PIXEL_STAH_REG		0x2e
> -
> -/* Horizontal Front Porch Status Low Byte Register */
> -#define SP_H_F_PORCH_STAL_REG		0x2f
> -
> -/* Horizontal Front Porch Statys High Byte Register */
> -#define SP_H_F_PORCH_STAH_REG		0x30
> -
> -/* Horizontal SYNC Width Status Low Byte Register */
> -#define SP_H_SYNC_STAL_REG		0x31
> -
> -/* Horizontal SYNC Width Status High Byte Register */
> -#define SP_H_SYNC_STAH_REG		0x32
> -
> -/* Horizontal Back Porch Status Low Byte Register */
> -#define SP_H_B_PORCH_STAL_REG		0x33
> -
> -/* Horizontal Back Porch Status High Byte Register */
> -#define SP_H_B_PORCH_STAH_REG		0x34
> -
> -/* InfoFrame AVI Packet DB1 Register */
> -#define SP_INFOFRAME_AVI_DB1_REG	0x70
> -
> -/* Bit Control Specific Register */
> -#define SP_BIT_CTRL_SPECIFIC_REG	0x80
> -#define SP_BIT_CTRL_SELECT_SHIFT	1
> -#define SP_ENABLE_BIT_CTRL		BIT(0)
> -
> -/* InfoFrame Audio Packet DB1 Register */
> -#define SP_INFOFRAME_AUD_DB1_REG	0x83
> -
> -/* InfoFrame MPEG Packet DB1 Register */
> -#define SP_INFOFRAME_MPEG_DB1_REG	0xb0
> -
> -/* Audio Channel Status Registers */
> -#define SP_AUD_CH_STATUS_BASE		0xd0
> -
> -/* Audio Channel Num Register 5 */
> -#define SP_I2S_CHANNEL_NUM_MASK		0xe0
> -#  define SP_I2S_CH_NUM_1		(0x00 << 5)
> -#  define SP_I2S_CH_NUM_2		(0x01 << 5)
> -#  define SP_I2S_CH_NUM_3		(0x02 << 5)
> -#  define SP_I2S_CH_NUM_4		(0x03 << 5)
> -#  define SP_I2S_CH_NUM_5		(0x04 << 5)
> -#  define SP_I2S_CH_NUM_6		(0x05 << 5)
> -#  define SP_I2S_CH_NUM_7		(0x06 << 5)
> -#  define SP_I2S_CH_NUM_8		(0x07 << 5)
> -#define SP_EXT_VUCP			BIT(2)
> -#define SP_VBIT				BIT(1)
> -#define SP_AUDIO_LAYOUT			BIT(0)
> -
> -/* Analog Debug Register 2 */
> -#define SP_ANALOG_DEBUG2_REG		0xdd
> -#define SP_FORCE_SW_OFF_BYPASS		0x20
> -#define SP_XTAL_FRQ			0x1c
> -#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
> -#  define SP_XTAL_FRQ_24M		(0x01 << 2)
> -#  define SP_XTAL_FRQ_25M		(0x02 << 2)
> -#  define SP_XTAL_FRQ_26M		(0x03 << 2)
> -#  define SP_XTAL_FRQ_27M		(0x04 << 2)
> -#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
> -#  define SP_XTAL_FRQ_52M		(0x06 << 2)
> -#define SP_POWERON_TIME_1P5MS		0x03
> -
> -/* Analog Control 0 Register */
> -#define SP_ANALOG_CTRL0_REG		0xe1
> -
> -/* Common Interrupt Status Register 1 */
> -#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
> -#define SP_PLL_LOCK_CHG			0x40
> -
> -/* Common Interrupt Status Register 2 */
> -#define SP_COMMON_INT_STATUS2		0xf2
> -#define SP_HDCP_AUTH_CHG		BIT(1)
> -#define SP_HDCP_AUTH_DONE		BIT(0)
> -
> -#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
> -
> -/* Common Interrupt Status Register 4 */
> -#define SP_COMMON_INT_STATUS4_REG	0xf4
> -#define SP_HPD_IRQ			BIT(6)
> -#define SP_HPD_ESYNC_ERR		BIT(4)
> -#define SP_HPD_CHG			BIT(2)
> -#define SP_HPD_LOST			BIT(1)
> -#define SP_HPD_PLUG			BIT(0)
> -
> -/* DP Interrupt Status Register */
> -#define SP_DP_INT_STATUS1_REG		0xf7
> -#define SP_TRAINING_FINISH		BIT(5)
> -#define SP_POLLING_ERR			BIT(4)
> -
> -/* Common Interrupt Mask Register */
> -#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
> -
> -#define SP_COMMON_INT_MASK4_REG		0xfb
> -
> -/* DP Interrupts Mask Register */
> -#define SP_DP_INT_MASK1_REG		0xfe
> -
> -/* Interrupt Control Register */
> -#define SP_INT_CTRL_REG			0xff
> -
>  /***************************************************************/
>  /* Register definition of device address 0x7a                  */
>  /***************************************************************/
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
> new file mode 100644
> index 000000000000..5a54c6d86428
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
> @@ -0,0 +1,256 @@
> +/*
> + * Copyright(c) 2016, Analogix Semiconductor.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.


Please use SPDX identifiers in all new files.


> + *
> + * Based on anx7808 driver obtained from chromeos with copyright:
> + * Copyright(c) 2013, Google Inc.
> + *
> + */
> +#ifndef _ANALOGIX_I2C_DPTX_H_
> +#define _ANALOGIX_I2C_DPTX_H_
> +
> +#define ANALOGIX_I2C_DPTX		0x70
> +
> +/***************************************************************/
> +/* Register definition of device address 0x70                  */
> +/***************************************************************/
> +
> +/* HDCP Status Register */
> +#define SP_TX_HDCP_STATUS_REG		0x00
> +#define SP_AUTH_FAIL			BIT(5)
> +#define SP_AUTHEN_PASS			BIT(1)
> +
> +/* HDCP Control Register 0 */
> +#define SP_HDCP_CTRL0_REG		0x01
> +#define SP_RX_REPEATER			BIT(6)
> +#define SP_RE_AUTH			BIT(5)
> +#define SP_SW_AUTH_OK			BIT(4)
> +#define SP_HARD_AUTH_EN			BIT(3)
> +#define SP_HDCP_ENC_EN			BIT(2)
> +#define SP_BKSV_SRM_PASS		BIT(1)
> +#define SP_KSVLIST_VLD			BIT(0)
> +/* HDCP Function Enabled */
> +#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
> +
> +/* HDCP Receiver BSTATUS Register 0 */
> +#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
> +/* HDCP Receiver BSTATUS Register 1 */
> +#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
> +
> +/* HDCP Embedded "Blue Screen" Content Registers */
> +#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
> +#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
> +#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
> +
> +/* HDCP Wait R0 Timing Register */
> +#define SP_HDCP_WAIT_R0_TIME_REG	0x40
> +
> +/* HDCP Link Integrity Check Timer Register */
> +#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
> +
> +/* HDCP Repeater Ready Wait Timer Register */
> +#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
> +
> +/* HDCP Auto Timer Register */
> +#define SP_HDCP_AUTO_TIMER_REG		0x51
> +
> +/* HDCP Key Status Register */
> +#define SP_HDCP_KEY_STATUS_REG		0x5e
> +
> +/* HDCP Key Command Register */
> +#define SP_HDCP_KEY_COMMAND_REG		0x5f
> +#define SP_DISABLE_SYNC_HDCP		BIT(2)
> +
> +/* OTP Memory Key Protection Registers */
> +#define SP_OTP_KEY_PROTECT1_REG		0x60
> +#define SP_OTP_KEY_PROTECT2_REG		0x61
> +#define SP_OTP_KEY_PROTECT3_REG		0x62
> +#define SP_OTP_PSW1			0xa2
> +#define SP_OTP_PSW2			0x7e
> +#define SP_OTP_PSW3			0xc6
> +
> +/* DP System Control Registers */
> +#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
> +/* Bits for DP System Control Register 2 */
> +#define SP_CHA_STA			BIT(2)
> +/* Bits for DP System Control Register 3 */
> +#define SP_HPD_STATUS			BIT(6)
> +#define SP_STRM_VALID			BIT(2)
> +/* Bits for DP System Control Register 4 */
> +#define SP_ENHANCED_MODE		BIT(3)
> +
> +/* DP Video Control Register */
> +#define SP_DP_VIDEO_CTRL_REG		0x84
> +#define SP_COLOR_F_MASK			0x06
> +#define SP_COLOR_F_SHIFT		1
> +#define SP_BPC_MASK			0xe0
> +#define SP_BPC_SHIFT			5
> +#  define SP_BPC_6BITS			0x00
> +#  define SP_BPC_8BITS			0x01
> +#  define SP_BPC_10BITS			0x02
> +#  define SP_BPC_12BITS			0x03
> +
> +/* DP Audio Control Register */
> +#define SP_DP_AUDIO_CTRL_REG		0x87
> +#define SP_AUD_EN			BIT(0)
> +
> +/* 10us Pulse Generate Timer Registers */
> +#define SP_I2C_GEN_10US_TIMER0_REG	0x88
> +#define SP_I2C_GEN_10US_TIMER1_REG	0x89
> +
> +/* Packet Send Control Register */
> +#define SP_PACKET_SEND_CTRL_REG		0x90
> +#define SP_AUD_IF_UP			BIT(7)
> +#define SP_AVI_IF_UD			BIT(6)
> +#define SP_MPEG_IF_UD			BIT(5)
> +#define SP_SPD_IF_UD			BIT(4)
> +#define SP_AUD_IF_EN			BIT(3)
> +#define SP_AVI_IF_EN			BIT(2)
> +#define SP_MPEG_IF_EN			BIT(1)
> +#define SP_SPD_IF_EN			BIT(0)
> +
> +/* DP HDCP Control Register */
> +#define SP_DP_HDCP_CTRL_REG		0x92
> +#define SP_AUTO_EN			BIT(7)
> +#define SP_AUTO_START			BIT(5)
> +#define SP_LINK_POLLING			BIT(1)
> +
> +/* DP Main Link Bandwidth Setting Register */
> +#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
> +#define SP_LINK_BW_SET_MASK		0x1f
> +#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
> +
> +/* DP Training Pattern Set Register */
> +#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
> +
> +/* DP Lane 0 Link Training Control Register */
> +#define SP_DP_LANE0_LT_CTRL_REG		0xa3
> +#define SP_TX_SW_SET_MASK		0x1b
> +#define SP_MAX_PRE_REACH		BIT(5)
> +#define SP_MAX_DRIVE_REACH		BIT(4)
> +#define SP_PRE_EMP_LEVEL1		BIT(3)
> +#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
> +
> +/* DP Link Training Control Register */
> +#define SP_DP_LT_CTRL_REG		0xa8
> +#define SP_LT_ERROR_TYPE_MASK		0x70
> +#  define SP_LT_NO_ERROR		0x00
> +#  define SP_LT_AUX_WRITE_ERROR		0x01
> +#  define SP_LT_MAX_DRIVE_REACHED	0x02
> +#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
> +#  define SP_LT_LOOP_SAME_5_TIME	0x04
> +#  define SP_LT_CR_FAIL_IN_EQ		0x05
> +#  define SP_LT_EQ_LOOP_5_TIME		0x06
> +#define SP_LT_EN			BIT(0)
> +
> +/* DP CEP Training Control Registers */
> +#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
> +#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
> +
> +/* DP Debug Register 1 */
> +#define SP_DP_DEBUG1_REG		0xb0
> +#define SP_DEBUG_PLL_LOCK		BIT(4)
> +#define SP_POLLING_EN			BIT(1)
> +
> +/* DP Polling Control Register */
> +#define SP_DP_POLLING_CTRL_REG		0xb4
> +#define SP_AUTO_POLLING_DISABLE		BIT(0)
> +
> +/* DP Link Debug Control Register */
> +#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
> +#define SP_M_VID_DEBUG			BIT(5)
> +#define SP_NEW_PRBS7			BIT(4)
> +#define SP_INSERT_ER			BIT(1)
> +#define SP_PRBS31_EN			BIT(0)
> +
> +/* AUX Misc control Register */
> +#define SP_AUX_MISC_CTRL_REG		0xbf
> +
> +/* DP PLL control Register */
> +#define SP_DP_PLL_CTRL_REG		0xc7
> +#define SP_PLL_RST			BIT(6)
> +
> +/* DP Analog Power Down Register */
> +#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
> +#define SP_CH0_PD			BIT(0)
> +
> +/* DP Misc Control Register */
> +#define SP_DP_MISC_CTRL_REG		0xcd
> +#define SP_EQ_TRAINING_LOOP		BIT(6)
> +
> +/* DP Extra I2C Device Address Register */
> +#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
> +#define SP_I2C_STRETCH_DISABLE		BIT(7)
> +
> +#define SP_I2C_EXTRA_ADDR		0x50
> +
> +/* DP Downspread Control Register 1 */
> +#define SP_DP_DOWNSPREAD_CTRL1_REG	0xd0
> +
> +/* DP M Value Calculation Control Register */
> +#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
> +#define SP_M_GEN_CLK_SEL		BIT(0)
> +
> +/* AUX Channel Access Status Register */
> +#define SP_AUX_CH_STATUS_REG		0xe0
> +#define SP_AUX_STATUS			0x0f
> +
> +/* AUX Channel DEFER Control Register */
> +#define SP_AUX_DEFER_CTRL_REG		0xe2
> +#define SP_DEFER_CTRL_EN		BIT(7)
> +
> +/* DP Buffer Data Count Register */
> +#define SP_BUF_DATA_COUNT_REG		0xe4
> +#define SP_BUF_DATA_COUNT_MASK		0x1f
> +#define SP_BUF_CLR			BIT(7)
> +
> +/* DP AUX Channel Control Register 1 */
> +#define SP_DP_AUX_CH_CTRL1_REG		0xe5
> +#define SP_AUX_TX_COMM_MASK		0x0f
> +#define SP_AUX_LENGTH_MASK		0xf0
> +#define SP_AUX_LENGTH_SHIFT		4
> +
> +/* DP AUX CH Address Register 0 */
> +#define SP_AUX_ADDR_7_0_REG		0xe6
> +
> +/* DP AUX CH Address Register 1 */
> +#define SP_AUX_ADDR_15_8_REG		0xe7
> +
> +/* DP AUX CH Address Register 2 */
> +#define SP_AUX_ADDR_19_16_REG		0xe8
> +#define SP_AUX_ADDR_19_16_MASK		0x0f
> +
> +/* DP AUX Channel Control Register 2 */
> +#define SP_DP_AUX_CH_CTRL2_REG		0xe9
> +#define SP_AUX_SEL_RXCM			BIT(6)
> +#define SP_AUX_CHSEL			BIT(3)
> +#define SP_AUX_PN_INV			BIT(2)
> +#define SP_ADDR_ONLY			BIT(1)
> +#define SP_AUX_EN			BIT(0)
> +
> +/* DP Video Stream Control InfoFrame Register */
> +#define SP_DP_3D_VSC_CTRL_REG		0xea
> +#define SP_INFO_FRAME_VSC_EN		BIT(0)
> +
> +/* DP Video Stream Data Byte 1 Register */
> +#define SP_DP_VSC_DB1_REG		0xeb
> +
> +/* DP AUX Channel Control Register 3 */
> +#define SP_DP_AUX_CH_CTRL3_REG		0xec
> +#define SP_WAIT_COUNTER_7_0_MASK	0xff
> +
> +/* DP AUX Channel Control Register 4 */
> +#define SP_DP_AUX_CH_CTRL4_REG		0xed
> +
> +/* DP AUX Buffer Data Registers */
> +#define SP_DP_BUF_DATA0_REG		0xf0
> +
> +#endif
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
> new file mode 100644
> index 000000000000..f48293f86f9d
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
> @@ -0,0 +1,242 @@
> +/*
> + * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.


ditto


With above fixed:

Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>

 --
Regards
Andrzej


> + *
> + */
> +#ifndef _ANALOGIX_I2C_TXCOMMON_H_
> +#define _ANALOGIX_I2C_TXCOMMON_H_
> +
> +#define ANALOGIX_I2C_TXCOMMON		0x72
> +
> +/***************************************************************/
> +/* Register definition of device address 0x72                  */
> +/***************************************************************/
> +
> +/*
> + * Core Register Definitions
> + */
> +
> +/* Device ID Low Byte Register */
> +#define SP_DEVICE_IDL_REG		0x02
> +
> +/* Device ID High Byte Register */
> +#define SP_DEVICE_IDH_REG		0x03
> +
> +/* Device version register */
> +#define SP_DEVICE_VERSION_REG		0x04
> +
> +/* Power Down Control Register */
> +#define SP_POWERDOWN_CTRL_REG		0x05
> +#define SP_REGISTER_PD			BIT(7)
> +#define SP_HDCP_PD			BIT(5)
> +#define SP_AUDIO_PD			BIT(4)
> +#define SP_VIDEO_PD			BIT(3)
> +#define SP_LINK_PD			BIT(2)
> +#define SP_TOTAL_PD			BIT(1)
> +
> +/* Reset Control Register 1 */
> +#define SP_RESET_CTRL1_REG		0x06
> +#define SP_MISC_RST			BIT(7)
> +#define SP_VIDCAP_RST			BIT(6)
> +#define SP_VIDFIF_RST			BIT(5)
> +#define SP_AUDFIF_RST			BIT(4)
> +#define SP_AUDCAP_RST			BIT(3)
> +#define SP_HDCP_RST			BIT(2)
> +#define SP_SW_RST			BIT(1)
> +#define SP_HW_RST			BIT(0)
> +
> +/* Reset Control Register 2 */
> +#define SP_RESET_CTRL2_REG		0x07
> +#define SP_AUX_RST			BIT(2)
> +#define SP_SERDES_FIFO_RST		BIT(1)
> +#define SP_I2C_REG_RST			BIT(0)
> +
> +/* Video Control Register 1 */
> +#define SP_VID_CTRL1_REG		0x08
> +#define SP_VIDEO_EN			BIT(7)
> +#define SP_VIDEO_MUTE			BIT(2)
> +#define SP_DE_GEN			BIT(1)
> +#define SP_DEMUX			BIT(0)
> +
> +/* Video Control Register 2 */
> +#define SP_VID_CTRL2_REG		0x09
> +#define SP_IN_COLOR_F_MASK		0x03
> +#define SP_IN_YC_BIT_SEL		BIT(2)
> +#define SP_IN_BPC_MASK			0x70
> +#define SP_IN_BPC_SHIFT			4
> +#  define SP_IN_BPC_12BIT		0x03
> +#  define SP_IN_BPC_10BIT		0x02
> +#  define SP_IN_BPC_8BIT		0x01
> +#  define SP_IN_BPC_6BIT		0x00
> +#define SP_IN_D_RANGE			BIT(7)
> +
> +/* Video Control Register 3 */
> +#define SP_VID_CTRL3_REG		0x0a
> +#define SP_HPD_OUT			BIT(6)
> +
> +/* Video Control Register 5 */
> +#define SP_VID_CTRL5_REG		0x0c
> +#define SP_CSC_STD_SEL			BIT(7)
> +#define SP_XVYCC_RNG_LMT		BIT(6)
> +#define SP_RANGE_Y2R			BIT(5)
> +#define SP_CSPACE_Y2R			BIT(4)
> +#define SP_RGB_RNG_LMT			BIT(3)
> +#define SP_Y_RNG_LMT			BIT(2)
> +#define SP_RANGE_R2Y			BIT(1)
> +#define SP_CSPACE_R2Y			BIT(0)
> +
> +/* Video Control Register 6 */
> +#define SP_VID_CTRL6_REG		0x0d
> +#define SP_TEST_PATTERN_EN		BIT(7)
> +#define SP_VIDEO_PROCESS_EN		BIT(6)
> +#define SP_VID_US_MODE			BIT(3)
> +#define SP_VID_DS_MODE			BIT(2)
> +#define SP_UP_SAMPLE			BIT(1)
> +#define SP_DOWN_SAMPLE			BIT(0)
> +
> +/* Video Control Register 8 */
> +#define SP_VID_CTRL8_REG		0x0f
> +#define SP_VID_VRES_TH			BIT(0)
> +
> +/* Total Line Status Low Byte Register */
> +#define SP_TOTAL_LINE_STAL_REG		0x24
> +
> +/* Total Line Status High Byte Register */
> +#define SP_TOTAL_LINE_STAH_REG		0x25
> +
> +/* Active Line Status Low Byte Register */
> +#define SP_ACT_LINE_STAL_REG		0x26
> +
> +/* Active Line Status High Byte Register */
> +#define SP_ACT_LINE_STAH_REG		0x27
> +
> +/* Vertical Front Porch Status Register */
> +#define SP_V_F_PORCH_STA_REG		0x28
> +
> +/* Vertical SYNC Width Status Register */
> +#define SP_V_SYNC_STA_REG		0x29
> +
> +/* Vertical Back Porch Status Register */
> +#define SP_V_B_PORCH_STA_REG		0x2a
> +
> +/* Total Pixel Status Low Byte Register */
> +#define SP_TOTAL_PIXEL_STAL_REG		0x2b
> +
> +/* Total Pixel Status High Byte Register */
> +#define SP_TOTAL_PIXEL_STAH_REG		0x2c
> +
> +/* Active Pixel Status Low Byte Register */
> +#define SP_ACT_PIXEL_STAL_REG		0x2d
> +
> +/* Active Pixel Status High Byte Register */
> +#define SP_ACT_PIXEL_STAH_REG		0x2e
> +
> +/* Horizontal Front Porch Status Low Byte Register */
> +#define SP_H_F_PORCH_STAL_REG		0x2f
> +
> +/* Horizontal Front Porch Statys High Byte Register */
> +#define SP_H_F_PORCH_STAH_REG		0x30
> +
> +/* Horizontal SYNC Width Status Low Byte Register */
> +#define SP_H_SYNC_STAL_REG		0x31
> +
> +/* Horizontal SYNC Width Status High Byte Register */
> +#define SP_H_SYNC_STAH_REG		0x32
> +
> +/* Horizontal Back Porch Status Low Byte Register */
> +#define SP_H_B_PORCH_STAL_REG		0x33
> +
> +/* Horizontal Back Porch Status High Byte Register */
> +#define SP_H_B_PORCH_STAH_REG		0x34
> +
> +/* InfoFrame AVI Packet DB1 Register */
> +#define SP_INFOFRAME_AVI_DB1_REG	0x70
> +
> +/* Bit Control Specific Register */
> +#define SP_BIT_CTRL_SPECIFIC_REG	0x80
> +#define SP_BIT_CTRL_SELECT_SHIFT	1
> +#define SP_ENABLE_BIT_CTRL		BIT(0)
> +
> +/* InfoFrame Audio Packet DB1 Register */
> +#define SP_INFOFRAME_AUD_DB1_REG	0x83
> +
> +/* InfoFrame MPEG Packet DB1 Register */
> +#define SP_INFOFRAME_MPEG_DB1_REG	0xb0
> +
> +/* Audio Channel Status Registers */
> +#define SP_AUD_CH_STATUS_BASE		0xd0
> +
> +/* Audio Channel Num Register 5 */
> +#define SP_I2S_CHANNEL_NUM_MASK		0xe0
> +#  define SP_I2S_CH_NUM_1		(0x00 << 5)
> +#  define SP_I2S_CH_NUM_2		(0x01 << 5)
> +#  define SP_I2S_CH_NUM_3		(0x02 << 5)
> +#  define SP_I2S_CH_NUM_4		(0x03 << 5)
> +#  define SP_I2S_CH_NUM_5		(0x04 << 5)
> +#  define SP_I2S_CH_NUM_6		(0x05 << 5)
> +#  define SP_I2S_CH_NUM_7		(0x06 << 5)
> +#  define SP_I2S_CH_NUM_8		(0x07 << 5)
> +#define SP_EXT_VUCP			BIT(2)
> +#define SP_VBIT				BIT(1)
> +#define SP_AUDIO_LAYOUT			BIT(0)
> +
> +/* Analog Debug Register 2 */
> +#define SP_ANALOG_DEBUG2_REG		0xdd
> +#define SP_FORCE_SW_OFF_BYPASS		0x20
> +#define SP_XTAL_FRQ			0x1c
> +#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
> +#  define SP_XTAL_FRQ_24M		(0x01 << 2)
> +#  define SP_XTAL_FRQ_25M		(0x02 << 2)
> +#  define SP_XTAL_FRQ_26M		(0x03 << 2)
> +#  define SP_XTAL_FRQ_27M		(0x04 << 2)
> +#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
> +#  define SP_XTAL_FRQ_52M		(0x06 << 2)
> +#define SP_POWERON_TIME_1P5MS		0x03
> +
> +/* Analog Control 0 Register */
> +#define SP_ANALOG_CTRL0_REG		0xe1
> +
> +/* Common Interrupt Status Register 1 */
> +#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
> +#define SP_PLL_LOCK_CHG			0x40
> +
> +/* Common Interrupt Status Register 2 */
> +#define SP_COMMON_INT_STATUS2		0xf2
> +#define SP_HDCP_AUTH_CHG		BIT(1)
> +#define SP_HDCP_AUTH_DONE		BIT(0)
> +
> +#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
> +
> +/* Common Interrupt Status Register 4 */
> +#define SP_COMMON_INT_STATUS4_REG	0xf4
> +#define SP_HPD_IRQ			BIT(6)
> +#define SP_HPD_ESYNC_ERR		BIT(4)
> +#define SP_HPD_CHG			BIT(2)
> +#define SP_HPD_LOST			BIT(1)
> +#define SP_HPD_PLUG			BIT(0)
> +
> +/* DP Interrupt Status Register */
> +#define SP_DP_INT_STATUS1_REG		0xf7
> +#define SP_TRAINING_FINISH		BIT(5)
> +#define SP_POLLING_ERR			BIT(4)
> +
> +/* Common Interrupt Mask Register */
> +#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
> +
> +#define SP_COMMON_INT_MASK4_REG		0xfb
> +
> +/* DP Interrupts Mask Register */
> +#define SP_DP_INT_MASK1_REG		0xfe
> +
> +/* Interrupt Control Register */
> +#define SP_INT_CTRL_REG			0xff
> +
> +#endif /* _ANALOGIX_I2C_TXCOMMON_H_ */


_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux