Hi Michael,
Thank you for the patch.
On Tue, Jun 11, 2019 at 03:04:07PM +0100, Michael Drake wrote:
> If the alive check detects a transition to the alive state,
> the device configuration is rewritten.
This seems like a big hack. You will have at the very least to explain
why this is needed, and why you can't configure the device in response
to drm_bridge operation calls.
> Signed-off-by: Michael Drake <michael.drake@xxxxxxxxxxxxxxx>
> Cc: Patrick Glaser <pglaser@xxxxxxxxx>
> Cc: Nate Case <ncase@xxxxxxxxx>
> ---
> drivers/gpu/drm/bridge/ti948.c | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/bridge/ti948.c b/drivers/gpu/drm/bridge/ti948.c
> index 86daa3701b91..b5c766711c4b 100644
> --- a/drivers/gpu/drm/bridge/ti948.c
> +++ b/drivers/gpu/drm/bridge/ti948.c
> @@ -132,6 +132,8 @@ struct ti948_reg_val {
> * @reg_names: Array of regulator names, or NULL.
> * @regs: Array of regulators, or NULL.
> * @reg_count: Number of entries in reg_names and regs arrays.
> + * @alive_check: Context for the alive checking work item.
> + * @alive: Whether the device is alive or not (alive_check).
> */
> struct ti948_ctx {
> struct i2c_client *i2c;
> @@ -141,6 +143,8 @@ struct ti948_ctx {
> const char **reg_names;
> struct regulator **regs;
> size_t reg_count;
> + struct delayed_work alive_check;
> + bool alive;
> };
>
> static bool ti948_readable_reg(struct device *dev, unsigned int reg)
> @@ -346,6 +350,8 @@ static int ti948_power_on(struct ti948_ctx *ti948)
> if (ret != 0)
> return ret;
>
> + ti948->alive = true;
> +
> msleep(500);
>
> return 0;
> @@ -356,6 +362,8 @@ static int ti948_power_off(struct ti948_ctx *ti948)
> int i;
> int ret;
>
> + ti948->alive = false;
> +
> for (i = ti948->reg_count; i > 0; i--) {
> dev_info(&ti948->i2c->dev, "Disabling %s regulator\n",
> ti948->reg_names[i - 1]);
> @@ -388,8 +396,17 @@ static void ti948_alive_check(struct work_struct *work)
> {
> struct delayed_work *dwork = to_delayed_work(work);
> struct ti948_ctx *ti948 = delayed_work_to_ti948_ctx(dwork);
> + int ret = ti948_device_check(ti948);
>
> - dev_info(&ti948->i2c->dev, "%s Alive check!\n", __func__);
> + if (ti948->alive == false && ret == 0) {
> + dev_info(&ti948->i2c->dev, "Device has come back to life!\n");
> + ti948_write_config_seq(ti948);
> + ti948->alive = true;
> +
> + } else if (ti948->alive == true && ret != 0) {
> + dev_info(&ti948->i2c->dev, "Device has stopped responding\n");
> + ti948->alive = false;
> + }
>
> /* Reschedule ourself for the next check. */
> schedule_delayed_work(&ti948->alive_check, TI948_ALIVE_CHECK_DELAY);
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
