Hi Michael,
Thank you for the patch.
On Tue, Jun 11, 2019 at 03:04:02PM +0100, Michael Drake wrote:
> Adds device tree bindings for:
>
> TI DS90UB948-Q1 2K FPD-Link III to OpenLDI Deserializer
>
> The device has the compatible string "ti,ds90ub948", and
> and allows an arrray of strings to be provided as regulator
s/arrray/array/
> names to enable for operation of the device.
>
> Signed-off-by: Michael Drake <michael.drake@xxxxxxxxxxxxxxx>
> Cc: Patrick Glaser <pglaser@xxxxxxxxx>
> Cc: Nate Case <ncase@xxxxxxxxx>
> ---
> .../bindings/display/bridge/ti,ds90ub948.txt | 24 +++++++++++++++++++
> 1 file changed, 24 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ds90ub948.txt
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ds90ub948.txt b/Documentation/devicetree/bindings/display/bridge/ti,ds90ub948.txt
> new file mode 100644
> index 000000000000..f9e86cb22900
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ti,ds90ub948.txt
> @@ -0,0 +1,24 @@
> +TI DS90UB948-Q1 2K FPD-Link III to OpenLDI Deserializer
> +=======================================================
> +
> +This is the binding for Texas Instruments DS90UB948-Q1 bridge deserializer.
> +
> +This device supports I2C only.
Then the DT node should be a child of its I2C controller, and have a reg
property.
> +
> +Required properties:
> +
> +- compatible: "ti,ds90ub948"
> +
> +Optional properties:
> +
> +- regulators: List of regulator name strings to enable for operation of device.
There's a standard binding for regulators, using *-supply properties.
Please use them.
You should also use the OF graph DT bindings to model the data
connections.
> +
> +Example
> +-------
> +
> +ti948: ds90ub948@0 {
> + compatible = "ti,ds90ub948";
> +
> + regulators: "vcc",
> + "vcc_disp";
> +};
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
