Hi Laurent, On 28/05/2019 15:12, Laurent Pinchart wrote: > Add a new optional renesas,companion property to point to the companion > LVDS encoder. This is used to support dual-link operation where the main > LVDS encoder splits even-numbered and odd-numbered pixels between the > two LVDS encoders. > > The new property doesn't control the mode of operation, it only > describes the relationship between the master and companion LVDS > encoders. > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> > Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx> > Tested-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> > --- > Changes since v2: > > - Clarify when the companion property is required or not allowed > > Changes since v1: > > - Fixed typo > --- > .../devicetree/bindings/display/bridge/renesas,lvds.txt | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > index 900a884ad9f5..2d24bd8cbec5 100644 > --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt > @@ -45,6 +45,13 @@ OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. > > Each port shall have a single endpoint. > > +Optional properties: > +> +- renesas,companion : phandle to the companion LVDS encoder. This property is > + mandatory for the first LVDS encoder on D3 and E3 SoCs, and shall point to > + the second encoder to be used as a companion in dual-link mode. It shall not > + be set for any other LVDS encoder. > + I see Sam has already asked for an updated example, so with that: I'm fine with the text above. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> > > Example: > > -- Regards -- Kieran _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
