The GOP sometimes initializes the pclk at a (slightly) different frequency
then the pclk which we've calculated.
This commit makes the DSI code read-back the pclk set by the GOP and
if that is within a reasonable margin of the calculated pclk, uses
that instead.
This fixes the first modeset being a full modeset instead of a
fast modeset on systems where the GOP pclk is different.
Changes in v2:
-Use intel_encoder_current_mode() to get the pclk setup by the GOP
Changes in v3:
-Back to the readback approach, skipping the dsi_pll.ctrl / .dev checks
in intel_pipe_config_compare() when adjust is set leads to:
[drm:pipe_config_err [i915]] *ERROR* mismatch in dsi_pll.ctrl (...)
[drm:pipe_config_err [i915]] *ERROR* mismatch in dsi_pll.div (...)
-Do the readback and pclk overriding from vlv_dsi_init(), rather then from
intel_dsi_vbt_init() as the vbt code should not be touching the hw
Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/gpu/drm/i915/vlv_dsi.c | 22 ++++++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
index 59500c838b9d..6d96891984a5 100644
--- a/drivers/gpu/drm/i915/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/vlv_dsi.c
@@ -1865,7 +1865,7 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
struct drm_encoder *encoder;
struct intel_connector *intel_connector;
struct drm_connector *connector;
- struct drm_display_mode *fixed_mode;
+ struct drm_display_mode *current_mode, *fixed_mode;
enum port port;
DRM_DEBUG_KMS("\n");
@@ -1909,6 +1909,9 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
intel_connector->get_hw_state = intel_connector_get_hw_state;
intel_encoder->port = port;
+ intel_encoder->type = INTEL_OUTPUT_DSI;
+ intel_encoder->power_domain = POWER_DOMAIN_PORT_DSI;
+ intel_encoder->cloneable = 0;
/*
* On BYT/CHV, pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI
@@ -1946,6 +1949,20 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
goto err;
}
+ /* Use clock read-back from current hw-state for fastboot */
+ current_mode = intel_encoder_current_mode(intel_encoder);
+ if (current_mode) {
+ DRM_DEBUG_KMS("Calculated pclk %d GOP %d\n",
+ intel_dsi->pclk, current_mode->clock);
+ if (intel_fuzzy_clock_check(intel_dsi->pclk,
+ current_mode->clock)) {
+ DRM_DEBUG_KMS("Using GOP pclk\n");
+ intel_dsi->pclk = current_mode->clock;
+ }
+
+ kfree(current_mode);
+ }
+
vlv_dphy_param_init(intel_dsi);
/*
@@ -1963,9 +1980,6 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
}
}
- intel_encoder->type = INTEL_OUTPUT_DSI;
- intel_encoder->power_domain = POWER_DOMAIN_PORT_DSI;
- intel_encoder->cloneable = 0;
drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
DRM_MODE_CONNECTOR_DSI);
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
