Hi,
On 04-06-19 19:35, Ville Syrjälä wrote:
On Fri, May 24, 2019 at 06:30:19PM +0200, Hans de Goede wrote:
The vlv/icl_dphy_param_init calls do various calculations to set dphy
parameters based on the pclk.
Move the calling of vlv/icl_dphy_param_init to vlv_dsi_init to give
vlv_dsi_init a chance to tweak the pclk before these calculations are done.
This also removes the single "if (IS_ICELAKE(dev_priv))" check from
intel_dsi_vbt_init making it fully platform agnostic.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/gpu/drm/i915/icl_dsi.c | 1 +
drivers/gpu/drm/i915/intel_dsi.h | 2 ++
drivers/gpu/drm/i915/intel_dsi_vbt.c | 9 ++-------
drivers/gpu/drm/i915/vlv_dsi.c | 2 ++
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
index 9d962ea1e635..0f43ef07efec 100644
--- a/drivers/gpu/drm/i915/icl_dsi.c
+++ b/drivers/gpu/drm/i915/icl_dsi.c
@@ -1455,6 +1455,7 @@ void icl_dsi_init(struct drm_i915_private *dev_priv)
goto err;
}
+ icl_dphy_param_init(intel_dsi);
I think we should move the entire function into this file.
I was thinking the same thing when I was writing the patch, but I was
not 100% sure. I'm glad that you think the same, I will post a
new version with this fixed (both of them).
Regards,
Hans
return;
err:
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index 705a609050c0..a58d3d988d9f 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -192,5 +192,7 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id);
void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
enum mipi_seq seq_id);
void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec);
+void icl_dphy_param_init(struct intel_dsi *intel_dsi);
+void vlv_dphy_param_init(struct intel_dsi *intel_dsi);
#endif /* _INTEL_DSI_H */
diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
index 3448e8d51057..022bf59418df 100644
--- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
@@ -578,7 +578,7 @@ static void intel_dsi_log_params(struct intel_dsi *intel_dsi)
#define ICL_HS_ZERO_CNT_MAX 0xf
#define ICL_EXIT_ZERO_CNT_MAX 0x7
-static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
+void icl_dphy_param_init(struct intel_dsi *intel_dsi)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
@@ -677,7 +677,7 @@ static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
intel_dsi_log_params(intel_dsi);
}
-static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
+void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
@@ -914,11 +914,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
intel_dsi->burst_mode_ratio = burst_mode_ratio;
- if (INTEL_GEN(dev_priv) >= 11)
- icl_dphy_param_init(intel_dsi);
- else
- vlv_dphy_param_init(intel_dsi);
-
/* delays in VBT are in unit of 100us, so need to convert
* here in ms
* Delay (100us) * 100 /1000 = Delay / 10 (ms) */
diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
index fce8b58f7f93..3329ccf3b346 100644
--- a/drivers/gpu/drm/i915/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/vlv_dsi.c
@@ -1782,6 +1782,8 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
goto err;
}
+ vlv_dphy_param_init(intel_dsi);
ditto
+
/*
* In case of BYT with CRC PMIC, we need to use GPIO for
* Panel control.
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
