From: Thierry Reding <treding@xxxxxxxxxx>
The VDD supply is only needed to supply power to eDP panels connected to
DPAUX. Technically that supply should be dealt with in the panel driver,
but for backwards-compatibility we need to keep this around anyway.
Also as a bit of background: the reason for why this supply is attached
to DPAUX is to make sure the panel is properly powered early on so that
it can generate a hotplug pulse at the appropriate time. This may no
longer be required given the support for deferred fbdev setup that was
"recently" introduced in DRM/KMS.
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
drivers/gpu/drm/tegra/dpaux.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/tegra/dpaux.c b/drivers/gpu/drm/tegra/dpaux.c
index ee4180d8db14..65c389d9c85d 100644
--- a/drivers/gpu/drm/tegra/dpaux.c
+++ b/drivers/gpu/drm/tegra/dpaux.c
@@ -485,11 +485,16 @@ static int tegra_dpaux_probe(struct platform_device *pdev)
return err;
}
- dpaux->vdd = devm_regulator_get(&pdev->dev, "vdd");
+ dpaux->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
if (IS_ERR(dpaux->vdd)) {
- dev_err(&pdev->dev, "failed to get VDD supply: %ld\n",
- PTR_ERR(dpaux->vdd));
- return PTR_ERR(dpaux->vdd);
+ if (PTR_ERR(dpaux->vdd) != -ENODEV) {
+ if (PTR_ERR(dpaux->vdd) != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to get VDD supply: %ld\n",
+ PTR_ERR(dpaux->vdd));
+
+ return PTR_ERR(dpaux->vdd);
+ }
}
platform_set_drvdata(pdev, dpaux);
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
