The KD035G6-54NT is a 3.5" 320x240 24-bit TFT LCD panel.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
Notes:
v2: - Add an address to the panel node
- Add information about SPI properties
- Add information about the 'port' sub-node
.../panel/kingdisplay,kd035g6-54nt.txt | 42 +++++++++++++++++++
1 file changed, 42 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
new file mode 100644
index 000000000000..fa9596082e44
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.txt
@@ -0,0 +1,42 @@
+King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
+
+Required properties:
+- compatible: should be "kingdisplay,kd035g6-54nt"
+- power-supply: See panel-common.txt
+- reset-gpios: See panel-common.txt
+
+Optional properties:
+- backlight: see panel-common.txt
+
+The generic bindings for the SPI slaves documented in [1] also apply.
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [2]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
+[2]: Documentation/devicetree/bindings/graph.txt
+
+Example:
+
+&spi {
+ panel@0 {
+ compatible = "kingdisplay,kd035g6-54nt";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+ spi-3wire;
+ spi-cs-high;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&ldo6>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+};
--
2.21.0.593.g511ec345e18
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
