Enable and connect the second LVDS encoder to the second LVDS input of
the THC63LVD1024 for dual-link LVDS operation. This requires changing
the default settings of SW45 and SW47 to OFF and ON respectively.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Tested-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
.../arm64/boot/dts/renesas/r8a77995-draak.dts | 24 +++++++++++++------
1 file changed, 17 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index a7dc11e36fd9..0699f1c19b11 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -77,11 +77,18 @@
port@0 {
reg = <0>;
- thc63lvd1024_in: endpoint {
+ thc63lvd1024_in0: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
+ port@1 {
+ reg = <1>;
+ thc63lvd1024_in1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+
port@2 {
reg = <2>;
thc63lvd1024_out: endpoint {
@@ -360,24 +367,27 @@
ports {
port@1 {
lvds0_out: endpoint {
- remote-endpoint = <&thc63lvd1024_in>;
+ remote-endpoint = <&thc63lvd1024_in0>;
};
};
};
};
&lvds1 {
- /*
- * Even though the LVDS1 output is not connected, the encoder must be
- * enabled to supply a pixel clock to the DU for the DPAD output when
- * LVDS0 is in use.
- */
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x12_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
+
+ ports {
+ port@1 {
+ lvds1_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in1>;
+ };
+ };
+ };
};
&ohci0 {
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
