The THC63LVD1024 LVDS decoder can operate in two modes, single-link or dual-link. In dual-link mode both input ports are used to carry even- and odd-numbered pixels separately. Document this in the DT bindings, along with the related rules governing port and usage. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> Reviewed-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Tested-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> --- .../bindings/display/bridge/thine,thc63lvd1024.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt index 37f0c04d5a28..d17d1e5820d7 100644 --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt @@ -28,6 +28,12 @@ Optional video port nodes: - port@1: Second LVDS input port - port@3: Second digital CMOS/TTL parallel output +The device can operate in single-link mode or dual-link mode. In single-link +mode, all pixels are received on port@0, and port@1 shall not contain any +endpoint. In dual-link mode, even-numbered pixels are received on port@0 and +odd-numbered pixels on port@1, and both port@0 and port@1 shall contain +endpoints. + Example: -------- -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
