Hi,
tc358767 bridge was originally implemented for eDP use with an embedded
panel. I've been working to add DP and HPD support, and this series is
the result. I did have a lot of issues with link training, but with
these, it's been working reliably with my devices.
Changes in v2
* Drop "implement naive HPD handling", and implement HPD interrupt handling.
Changes in v3
* Various small comment, description and formatting changes
* 'hpd-num' DT property renamed to 'toshiba,hpd-pin'
* Check DP0CTL == 0 at the beginning of tc_main_link_enable
* Disable only the video stream in tc_stream_disable()
* Fix tc_connector_detect for eDP panels
Changes in v4
* Add "read display_props in get_modes()"
* Remove the tc_get_display_props call from detect callback
* Fix the DP0CTL check in tc_main_link_enable. Only check for DP_EN bit,
as we can have other bits set (e.g. after reset VID_MN_GEN is set)
* Added some reviewed-bys
Tomi
Tomi Valkeinen (24):
drm/bridge: tc358767: fix tc_aux_get_status error handling
drm/bridge: tc358767: reset voltage-swing & pre-emphasis
drm/bridge: tc358767: fix ansi 8b10b use
drm/bridge: tc358767: cleanup spread & scrambler_dis
drm/bridge: tc358767: remove unused swing & preemp
drm/bridge: tc358767: cleanup aux_link_setup
drm/bridge: tc358767: move video stream setup to tc_main_link_stream
drm/bridge: tc358767: split stream enable/disable
drm/bridge: tc358767: move PXL PLL enable/disable to stream
enable/disable
drm/bridge: tc358767: add link disable function
drm/bridge: tc358767: disable only video stream in tc_stream_disable
drm/bridge: tc358767: ensure DP is disabled before LT
drm/bridge: tc358767: remove unnecessary msleep
drm/bridge: tc358767: use more reliable seq when finishing LT
drm/bridge: tc358767: cleanup LT result check
drm/bridge: tc358767: clean-up link training
drm/bridge: tc358767: remove check for video mode in link enable
drm/bridge: tc358767: use bridge mode_valid
drm/bridge: tc358767: remove tc_connector_best_encoder
drm/bridge: tc358767: copy the mode data, instead of storing the
pointer
drm/bridge: tc358767: read display_props in get_modes()
drm/bridge: tc358767: add GPIO & interrupt registers
drm/bridge: tc358767: add IRQ and HPD support
dt-bindings: tc358767: add HPD support
.../display/bridge/toshiba,tc358767.txt | 1 +
drivers/gpu/drm/bridge/tc358767.c | 593 +++++++++++-------
2 files changed, 382 insertions(+), 212 deletions(-)
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
