Hi Rob, On Fri, May 17, 2019 at 04:11:48PM -0500, Rob Herring wrote: > On Wed, Apr 24, 2019 at 4:25 AM Brian Masney <masneyb@xxxxxxxxxxxxx> wrote: > > > > Add new backlight bindings for the TI LM3630A dual-string white LED. > > > > Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx> > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > --- > > Changes since v5: > > - Change 'lm3630a_bl@38' in examples to 'led-controller@38' > > > > Changes since v4: > > - Drop $ref from led-sources > > - Drop description from reg of i2c address > > - Expand description of reg for the control bank > > - Drop status from examples > > > > Changes since v3: > > - Add label. I didn't add a description for it since that'll come from > > the common properties once its converted. > > > > Changes since v2: > > - Update description of max-brightness > > - Add description for reg > > - Correct typo: s/tranisiton/transition > > - add reg to control banks > > - add additionalProperties > > > > .../leds/backlight/lm3630a-backlight.yaml | 129 ++++++++++++++++++ > > 1 file changed, 129 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml > > I'm working on getting the examples to be validated by the schema (in > addition to just building with dtc) and there's a couple of errors: > > Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: > '#address-cells', '#size-cells' do not match any of the regexes: > '^led@[01]$', 'pinctrl-[0-9]+' > Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: > '#address-cells', '#size-cells' do not match any of the regexes: > '^led@[01]$', 'pinctrl-[0-9]+' > > You didn't list '#address-cells' and '#size-cells'. > > Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: > led@0: 'ti,linear-mapping-mode' does not match any of the regexes: > 'pinctrl-[0-9]+' > Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: > led@1: 'ti,linear-mapping-mode' does not match any of the regexes: > 'pinctrl-[0-9]+' > > 'ti,linear-mapping-mode' is not defined in the child nodes. I'm sorry about that. I'll send out a patch this weekend to correct this. I have 'make dt_binding_check' in my local build script. Is there something else that I should be running as well? Or do you have a branch somewhere with your validation work that I can test my changes against? Brian _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
