On 20.05.2019 15:37, Neil Armstrong wrote:
> Now the DW-HDMI Controller supports the HDMI2.0 modes, enable support
> for these modes in the connector if the platform supports them.
> We limit these modes to DW-HDMI IP version >= 0x200a which
> are designed to support HDMI2.0 display modes.
>
> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> Tested-by: Heiko Stuebner <heiko@xxxxxxxxx>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 6 ++++++
> include/drm/bridge/dw_hdmi.h | 1 +
> 2 files changed, 7 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index ab7968c8f6a2..b50c49caf7ae 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2629,6 +2629,12 @@ __dw_hdmi_probe(struct platform_device *pdev,
> if (hdmi->phy.ops->setup_hpd)
> hdmi->phy.ops->setup_hpd(hdmi, hdmi->phy.data);
>
> + if (hdmi->version >= 0x200a)
> + hdmi->connector.ycbcr_420_allowed =
> + hdmi->plat_data->ycbcr_420_allowed;
> + else
> + hdmi->connector.ycbcr_420_allowed = false;
> +
I suspect else clause can be dropped.
Beside this:
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
--
Regards
Andrzej
> memset(&pdevinfo, 0, sizeof(pdevinfo));
> pdevinfo.parent = dev;
> pdevinfo.id = PLATFORM_DEVID_AUTO;
> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
> index 66e70770cce5..0f0e82638fbe 100644
> --- a/include/drm/bridge/dw_hdmi.h
> +++ b/include/drm/bridge/dw_hdmi.h
> @@ -130,6 +130,7 @@ struct dw_hdmi_plat_data {
> const struct drm_display_mode *mode);
> unsigned long input_bus_format;
> unsigned long input_bus_encoding;
> + bool ycbcr_420_allowed;
>
> /* Vendor PHY support */
> const struct dw_hdmi_phy_ops *phy_ops;
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
