Re: [PATCH] kernel.h: Add non_block_start/end()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 21, 2019 at 12:46:38PM +0200, Michal Hocko wrote:
> On Tue 21-05-19 12:06:11, Daniel Vetter wrote:
> > In some special cases we must not block, but there's not a
> > spinlock, preempt-off, irqs-off or similar critical section already
> > that arms the might_sleep() debug checks. Add a non_block_start/end()
> > pair to annotate these.
> > 
> > This will be used in the oom paths of mmu-notifiers, where blocking is
> > not allowed to make sure there's forward progress. Quoting Michal:
> > 
> > "The notifier is called from quite a restricted context - oom_reaper -
> > which shouldn't depend on any locks or sleepable conditionals. The code
> > should be swift as well but we mostly do care about it to make a forward
> > progress. Checking for sleepable context is the best thing we could come
> > up with that would describe these demands at least partially."
> > 
> > Peter also asked whether we want to catch spinlocks on top, but Michal
> > said those are less of a problem because spinlocks can't have an
> > indirect dependency upon the page allocator and hence close the loop
> > with the oom reaper.
> > 
> > Suggested by Michal Hocko.
> > 
> > v2:
> > - Improve commit message (Michal)
> > - Also check in schedule, not just might_sleep (Peter)
> > 
> > v3: It works better when I actually squash in the fixup I had lying
> > around :-/
> > 
> > Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> > Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> > Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> > Cc: Michal Hocko <mhocko@xxxxxxxx>
> > Cc: David Rientjes <rientjes@xxxxxxxxxx>
> > Cc: "Christian König" <christian.koenig@xxxxxxx>
> > Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> > Cc: "Jérôme Glisse" <jglisse@xxxxxxxxxx>
> > Cc: linux-mm@xxxxxxxxx
> > Cc: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
> > Cc: Wei Wang <wvw@xxxxxxxxxx>
> > Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> > Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> > Cc: Jann Horn <jannh@xxxxxxxxxx>
> > Cc: Feng Tang <feng.tang@xxxxxxxxx>
> > Cc: Kees Cook <keescook@xxxxxxxxxxxx>
> > Cc: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Acked-by: Christian König <christian.koenig@xxxxxxx> (v1)
> > Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> 
> I like this in general. The implementation looks reasonable to me but I
> didn't check deeply enough to give my R-by or A-by.

Thanks for all your comments. I'll ask Jerome Glisse to look into this, I
think it'd could be useful for all the HMM work too.

And I sent this out without reply-to the patch it's supposed to replace,
will need to do that again so patchwork and 0day pick up the correct
series. Sry about that noise :-/
-Daniel

> 
> > ---
> >  include/linux/kernel.h | 10 +++++++++-
> >  include/linux/sched.h  |  4 ++++
> >  kernel/sched/core.c    | 19 ++++++++++++++-----
> >  3 files changed, 27 insertions(+), 6 deletions(-)
> > 
> > diff --git a/include/linux/kernel.h b/include/linux/kernel.h
> > index 74b1ee9027f5..b5f2c2ff0eab 100644
> > --- a/include/linux/kernel.h
> > +++ b/include/linux/kernel.h
> > @@ -214,7 +214,9 @@ extern void __cant_sleep(const char *file, int line, int preempt_offset);
> >   * might_sleep - annotation for functions that can sleep
> >   *
> >   * this macro will print a stack trace if it is executed in an atomic
> > - * context (spinlock, irq-handler, ...).
> > + * context (spinlock, irq-handler, ...). Additional sections where blocking is
> > + * not allowed can be annotated with non_block_start() and non_block_end()
> > + * pairs.
> >   *
> >   * This is a useful debugging help to be able to catch problems early and not
> >   * be bitten later when the calling function happens to sleep when it is not
> > @@ -230,6 +232,10 @@ extern void __cant_sleep(const char *file, int line, int preempt_offset);
> >  # define cant_sleep() \
> >  	do { __cant_sleep(__FILE__, __LINE__, 0); } while (0)
> >  # define sched_annotate_sleep()	(current->task_state_change = 0)
> > +# define non_block_start() \
> > +	do { current->non_block_count++; } while (0)
> > +# define non_block_end() \
> > +	do { WARN_ON(current->non_block_count-- == 0); } while (0)
> >  #else
> >    static inline void ___might_sleep(const char *file, int line,
> >  				   int preempt_offset) { }
> > @@ -238,6 +244,8 @@ extern void __cant_sleep(const char *file, int line, int preempt_offset);
> >  # define might_sleep() do { might_resched(); } while (0)
> >  # define cant_sleep() do { } while (0)
> >  # define sched_annotate_sleep() do { } while (0)
> > +# define non_block_start() do { } while (0)
> > +# define non_block_end() do { } while (0)
> >  #endif
> >  
> >  #define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0)
> > diff --git a/include/linux/sched.h b/include/linux/sched.h
> > index 11837410690f..7f5b293e72df 100644
> > --- a/include/linux/sched.h
> > +++ b/include/linux/sched.h
> > @@ -908,6 +908,10 @@ struct task_struct {
> >  	struct mutex_waiter		*blocked_on;
> >  #endif
> >  
> > +#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
> > +	int				non_block_count;
> > +#endif
> > +
> >  #ifdef CONFIG_TRACE_IRQFLAGS
> >  	unsigned int			irq_events;
> >  	unsigned long			hardirq_enable_ip;
> > diff --git a/kernel/sched/core.c b/kernel/sched/core.c
> > index 102dfcf0a29a..ed7755a28465 100644
> > --- a/kernel/sched/core.c
> > +++ b/kernel/sched/core.c
> > @@ -3264,13 +3264,22 @@ static noinline void __schedule_bug(struct task_struct *prev)
> >  /*
> >   * Various schedule()-time debugging checks and statistics:
> >   */
> > -static inline void schedule_debug(struct task_struct *prev)
> > +static inline void schedule_debug(struct task_struct *prev, bool preempt)
> >  {
> >  #ifdef CONFIG_SCHED_STACK_END_CHECK
> >  	if (task_stack_end_corrupted(prev))
> >  		panic("corrupted stack end detected inside scheduler\n");
> >  #endif
> >  
> > +#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
> > +	if (!preempt && prev->state && prev->non_block_count) {
> > +		printk(KERN_ERR "BUG: scheduling in a non-blocking section: %s/%d/%i\n",
> > +			prev->comm, prev->pid, prev->non_block_count);
> > +		dump_stack();
> > +		add_taint(TAINT_WARN, LOCKDEP_STILL_OK);
> > +	}
> > +#endif
> > +
> >  	if (unlikely(in_atomic_preempt_off())) {
> >  		__schedule_bug(prev);
> >  		preempt_count_set(PREEMPT_DISABLED);
> > @@ -3377,7 +3386,7 @@ static void __sched notrace __schedule(bool preempt)
> >  	rq = cpu_rq(cpu);
> >  	prev = rq->curr;
> >  
> > -	schedule_debug(prev);
> > +	schedule_debug(prev, preempt);
> >  
> >  	if (sched_feat(HRTICK))
> >  		hrtick_clear(rq);
> > @@ -6102,7 +6111,7 @@ void ___might_sleep(const char *file, int line, int preempt_offset)
> >  	rcu_sleep_check();
> >  
> >  	if ((preempt_count_equals(preempt_offset) && !irqs_disabled() &&
> > -	     !is_idle_task(current)) ||
> > +	     !is_idle_task(current) && !current->non_block_count) ||
> >  	    system_state == SYSTEM_BOOTING || system_state > SYSTEM_RUNNING ||
> >  	    oops_in_progress)
> >  		return;
> > @@ -6118,8 +6127,8 @@ void ___might_sleep(const char *file, int line, int preempt_offset)
> >  		"BUG: sleeping function called from invalid context at %s:%d\n",
> >  			file, line);
> >  	printk(KERN_ERR
> > -		"in_atomic(): %d, irqs_disabled(): %d, pid: %d, name: %s\n",
> > -			in_atomic(), irqs_disabled(),
> > +		"in_atomic(): %d, irqs_disabled(): %d, non_block: %d, pid: %d, name: %s\n",
> > +			in_atomic(), irqs_disabled(), current->non_block_count,
> >  			current->pid, current->comm);
> >  
> >  	if (task_stack_end_corrupted(current))
> > -- 
> > 2.20.1
> > 
> 
> -- 
> Michal Hocko
> SUSE Labs

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux