Thierry, On Mon, Apr 8, 2019 at 7:39 AM Doug Anderson <dianders@xxxxxxxxxxxx> wrote: > > Thierry, > > On Mon, Apr 8, 2019 at 3:32 AM Thierry Reding <thierry.reding@xxxxxxxxx> wrote: > > > > On Mon, Apr 01, 2019 at 10:17:18AM -0700, Douglas Anderson wrote: > > > From: Sean Paul <seanpaul@xxxxxxxxxxxx> > > > > > > This patch adds a new subnode to simple-panel allowing us to override > > > the typical timing expressed in the panel's display_timing. > > > > > > Changes in v2: > > > - Split out the binding into a new patch (Rob) > > > - display-timings is a new section (Rob) > > > - Use the full display-timings subnode instead of picking the timing > > > out (Rob/Thierry) > > > Changes in v3: > > > - Go back to using the timing subnode directly, but rename to > > > panel-timing (Rob) > > > Changes in v4: > > > - Simplify desc. for when override should be used (Thierry/Laurent) > > > - Removed Rob H review since it's been a year and wording changed > > > Changes in v5: > > > - Removed bit about OS may ignore (Rob/Ezequiel) > > > > > > Cc: Doug Anderson <dianders@xxxxxxxxxxxx> > > > Cc: Eric Anholt <eric@xxxxxxxxxx> > > > Cc: Heiko Stuebner <heiko@xxxxxxxxx> > > > Cc: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx> > > > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > > > Cc: Stéphane Marchesin <marcheu@xxxxxxxxxxxx> > > > Cc: Thierry Reding <thierry.reding@xxxxxxxxx> > > > Cc: devicetree@xxxxxxxxxxxxxxx > > > Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx > > > Cc: linux-rockchip@xxxxxxxxxxxxxxxxxxx > > > Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx> > > > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> > > > --- > > > > > > .../bindings/display/panel/simple-panel.txt | 22 +++++++++++++++++++ > > > 1 file changed, 22 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt > > > index b2b872c710f2..93882268c0b9 100644 > > > --- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt > > > +++ b/Documentation/devicetree/bindings/display/panel/simple-panel.txt > > > @@ -15,6 +15,16 @@ Optional properties: > > > (hot plug detect) signal, but the signal isn't hooked up so we should > > > hardcode the max delay from the panel spec when powering up the panel. > > > > > > +panel-timing subnode > > > > Is there any reason why we need the panel- prefix? This is already part > > of a panel definition, so it's completely redundant. Why not just name > > the subnode "timing"? > > It was a really long time ago since this patch series was idle for a > while, but you previous had similar feedback in v3 but ended up OK > with it. See: > > https://patchwork.kernel.org/patch/10207583/ > > I believe the original node name came out of some back and forth > between Rob and Sean. As far as I can tell, the context is back in > <https://patchwork.kernel.org/patch/10203483/>. I think Rob wanted it > to follow other similar node names. > > > That all being said, if you feel strongly about it being called > "timing" and Rob's OK w/ that too then I'll re-spin the series. With 5.2-rc1 out, maybe this series is ready to land? If you'd like me to change things as per above I can. ...but it feels like keeping the already-agreed-upon name might be easiest / best? Presumably you'd land patches 1, 2, 4, and 5 and then Heiko could land the dts patches? Thanks! -Doug _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
