Re: [PATCH v3] drm/komeda: Add writeback support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 16, 2019 at 09:13:27AM +0100, james qian wang (Arm Technology China) wrote:
> Komeda driver uses a individual component to describe the HW's writeback
> caps, but drivers doesn't define a new structure and still uses the
> existing "struct komeda_layer" to describe this new component.
> The detailed changes as follow:
> 
> 1. Initialize wb_layer according to HW and report it to CORE.
> 2. CORE exposes wb_layer as a resource to KMS by private_obj.
> 3. Report writeback supporting by add a wb_connector to KMS, and then
>    wb_connector will take act as a component resources user,
>    so the func komeda_wb_encoder_atomic_check claims komeda resources
>    (scaler and wb_layer) accroding to its state configuration to the
>    wb_connector. and the wb_state configuration will be validated on the
>    specific component resources to see if the caps of component can
>    meet the requirement of wb_connector. if not check failed.
> 4. Update irq_handler to notify the completion of writeback.
> 
> NOTE:
> This change doesn't add scaling writeback support, that support will
> be added in the future after the scaler support.
> 
> v2: Rebase
> v3: Rebase and constify the d71_wb_layer_funcs
> 
> Depends on:
> - https://patchwork.freedesktop.org/series/59915/
> 
> Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@xxxxxxx>
> ---
>  drivers/gpu/drm/arm/display/komeda/Makefile   |   1 +
>  .../arm/display/komeda/d71/d71_component.c    |  90 ++++++++-
>  .../gpu/drm/arm/display/komeda/komeda_crtc.c  |  15 ++
>  .../arm/display/komeda/komeda_framebuffer.c   |  19 ++
>  .../gpu/drm/arm/display/komeda/komeda_kms.c   |   4 +
>  .../gpu/drm/arm/display/komeda/komeda_kms.h   |  27 +++
>  .../drm/arm/display/komeda/komeda_pipeline.h  |   7 +
>  .../display/komeda/komeda_pipeline_state.c    |  51 ++++-
>  .../arm/display/komeda/komeda_private_obj.c   |   6 +
>  .../arm/display/komeda/komeda_wb_connector.c  | 181 ++++++++++++++++++
>  10 files changed, 398 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> 
> diff --git a/drivers/gpu/drm/arm/display/komeda/Makefile b/drivers/gpu/drm/arm/display/komeda/Makefile
> index 62bd1bff66a3..d7e29fc688c3 100644
> --- a/drivers/gpu/drm/arm/display/komeda/Makefile
> +++ b/drivers/gpu/drm/arm/display/komeda/Makefile
> @@ -14,6 +14,7 @@ komeda-y := \
>  	komeda_kms.o \
>  	komeda_crtc.o \
>  	komeda_plane.o \
> +	komeda_wb_connector.o \
>  	komeda_private_obj.o
>  
>  komeda-y += \
> diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> index 6bab816ed8e7..67e698d0e6aa 100644
> --- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> +++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
> @@ -288,10 +288,98 @@ static int d71_layer_init(struct d71_dev *d71,
>  	return 0;
>  }
>  
> +static void d71_wb_layer_update(struct komeda_component *c,
> +				struct komeda_component_state *state)
> +{
> +	struct komeda_layer_state *st = to_layer_st(state);
> +	struct drm_connector_state *conn_st = state->wb_conn->state;
> +	struct drm_framebuffer *fb = conn_st->writeback_job->fb;
> +	struct komeda_fb *kfb = to_kfb(fb);
> +	u32 __iomem *reg = c->reg;
> +	u32 ctrl = L_EN | LW_OFM, mask = L_EN | LW_OFM | LW_TBU_EN;
> +	int i;
> +
> +	for (i = 0; i < fb->format->num_planes; i++) {
> +		malidp_write32(reg + i * LAYER_PER_PLANE_REGS, BLK_P0_PTR_LOW,
> +			       lower_32_bits(st->addr[i]));
> +		malidp_write32(reg + i * LAYER_PER_PLANE_REGS, BLK_P0_PTR_HIGH,
> +			       upper_32_bits(st->addr[i]));
> +
> +		malidp_write32(reg + i * LAYER_PER_PLANE_REGS, BLK_P0_STRIDE,
> +			       fb->pitches[i] & 0xFFFF);
> +	}
> +
> +	malidp_write32(reg, LAYER_FMT, kfb->format_caps->hw_id);
> +	malidp_write32(reg, BLK_IN_SIZE, HV_SIZE(st->hsize, st->vsize));
> +	malidp_write32(reg, BLK_INPUT_ID0, to_d71_input_id(&state->inputs[0]));
> +	malidp_write32_mask(reg, BLK_CONTROL, mask, ctrl);
> +}
> +
> +static void d71_wb_layer_dump(struct komeda_component *c, struct seq_file *sf)
> +{
> +	u32 v[12], i;
> +
> +	dump_block_header(sf, c->reg);
> +
> +	get_values_from_reg(c->reg, 0x80, 1, v);
> +	seq_printf(sf, "LW_INPUT_ID0:\t\t0x%X\n", v[0]);
> +
> +	get_values_from_reg(c->reg, 0xD0, 3, v);
> +	seq_printf(sf, "LW_CONTROL:\t\t0x%X\n", v[0]);
> +	seq_printf(sf, "LW_PROG_LINE:\t\t0x%X\n", v[1]);
> +	seq_printf(sf, "LW_FORMAT:\t\t0x%X\n", v[2]);
> +
> +	get_values_from_reg(c->reg, 0xE0, 1, v);
> +	seq_printf(sf, "LW_IN_SIZE:\t\t0x%X\n", v[0]);
> +
> +	for (i = 0; i < 2; i++) {
> +		get_values_from_reg(c->reg, 0x100 + i * 0x10, 3, v);
> +		seq_printf(sf, "LW_P%u_PTR_LOW:\t\t0x%X\n", i, v[0]);
> +		seq_printf(sf, "LW_P%u_PTR_HIGH:\t\t0x%X\n", i, v[1]);
> +		seq_printf(sf, "LW_P%u_STRIDE:\t\t0x%X\n", i, v[2]);
> +	}
> +
> +	get_values_from_reg(c->reg, 0x130, 12, v);
> +	for (i = 0; i < 12; i++)
> +		seq_printf(sf, "LW_RGB_YUV_COEFF%u:\t0x%X\n", i, v[i]);
> +}
> +
> +static void d71_wb_layer_disable(struct komeda_component *c)
> +{
> +	malidp_write32(c->reg, BLK_INPUT_ID0, 0);
> +	malidp_write32_mask(c->reg, BLK_CONTROL, L_EN, 0);
> +}
> +
> +static const struct komeda_component_funcs d71_wb_layer_funcs = {
> +	.update		= d71_wb_layer_update,
> +	.disable	= d71_wb_layer_disable,
> +	.dump_register	= d71_wb_layer_dump,
> +};
> +
>  static int d71_wb_layer_init(struct d71_dev *d71,
>  			     struct block_header *blk, u32 __iomem *reg)
>  {
> -	DRM_DEBUG("Detect D71_Wb_Layer.\n");
> +	struct komeda_component *c;
> +	struct komeda_layer *wb_layer;
> +	u32 pipe_id, layer_id;
> +
> +	get_resources_id(blk->block_info, &pipe_id, &layer_id);
> +
> +	c = komeda_component_add(&d71->pipes[pipe_id]->base, sizeof(*wb_layer),
> +				 layer_id, BLOCK_INFO_INPUT_ID(blk->block_info),
> +				 &d71_wb_layer_funcs,
> +				 1, get_valid_inputs(blk), 0, reg,
> +				 "LPU%d_LAYER_WR", pipe_id);
> +	if (!c) {
I think we should use 'IS_ERR(c)' as komeda_component_add() returns a valid
error code.

> +		DRM_ERROR("Failed to add wb_layer component\n");
> +		return -EINVAL;
> +	}
> +
> +	wb_layer = to_layer(c);
> +	wb_layer->layer_type = KOMEDA_FMT_WB_LAYER;
> +
> +	set_range(&wb_layer->hsize_in, D71_MIN_LINE_SIZE, d71->max_line_size);
> +	set_range(&wb_layer->vsize_in, D71_MIN_VERTICAL_SIZE, d71->max_vsize);
>  
>  	return 0;
>  }
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> index 284ce079d8c4..6712603b8c7a 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
> @@ -165,6 +165,15 @@ void komeda_crtc_handle_event(struct komeda_crtc   *kcrtc,
>  	if (events & KOMEDA_EVENT_VSYNC)
>  		drm_crtc_handle_vblank(crtc);
>  
> +	if (events & KOMEDA_EVENT_EOW) {
> +		struct komeda_wb_connector *wb_conn = kcrtc->wb_conn;
> +
> +		if (wb_conn)
> +			drm_writeback_signal_completion(&wb_conn->base, 0);
> +		else
> +			DRM_WARN("CRTC[%d]: EOW happen but no wb_connector.\n",
> +				 drm_crtc_index(&kcrtc->base));
> +	}
>  	/* will handle it together with the write back support */
>  	if (events & KOMEDA_EVENT_EOW)
>  		DRM_DEBUG("EOW.\n");
> @@ -201,6 +210,8 @@ komeda_crtc_do_flush(struct drm_crtc *crtc,
>  	struct komeda_crtc_state *kcrtc_st = to_kcrtc_st(crtc->state);
>  	struct komeda_dev *mdev = kcrtc->base.dev->dev_private;
>  	struct komeda_pipeline *master = kcrtc->master;
> +	struct komeda_wb_connector *wb_conn = kcrtc->wb_conn;
> +	struct drm_connector_state *conn_st;
>  
>  	DRM_DEBUG_ATOMIC("CRTC%d_FLUSH: active_pipes: 0x%x, affected: 0x%x.\n",
>  			 drm_crtc_index(crtc),
> @@ -210,6 +221,10 @@ komeda_crtc_do_flush(struct drm_crtc *crtc,
>  	if (has_bit(master->id, kcrtc_st->affected_pipes))
>  		komeda_pipeline_update(master, old->state);
>  
> +	conn_st = wb_conn ? wb_conn->base.base.state : NULL;
> +	if (conn_st && conn_st->writeback_job)
> +		drm_writeback_queue_job(&wb_conn->base, conn_st);
> +
>  	/* step 2: notify the HW to kickoff the update */
>  	mdev->funcs->flush(mdev, master->id, kcrtc_st->active_pipes);
>  }
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c b/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c
> index 9cc9935024f7..4d8160cf09c3 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c
> @@ -165,3 +165,22 @@ komeda_fb_get_pixel_addr(struct komeda_fb *kfb, int x, int y, int plane)
>  
>  	return obj->paddr + offset;
>  }
> +
> +/* if the fb can be supported by a specific layer */
> +bool komeda_fb_is_layer_supported(struct komeda_fb *kfb, u32 layer_type)
> +{
> +	struct drm_framebuffer *fb = &kfb->base;
> +	struct komeda_dev *mdev = fb->dev->dev_private;
> +	const struct komeda_format_caps *caps;
> +	u32 fourcc = fb->format->format;
> +	u64 modifier = fb->modifier;
> +
> +	caps = komeda_get_format_caps(&mdev->fmt_tbl, fourcc, modifier);
> +	if (!caps)
> +		return false;
> +
> +	if (!(caps->supported_layer_types & layer_type))
> +		return false;
> +
> +	return true;
> +}
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> index 86f6542afb40..3e58901fb776 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.c
> @@ -188,6 +188,10 @@ struct komeda_kms_dev *komeda_kms_attach(struct komeda_dev *mdev)
>  	if (err)
>  		goto cleanup_mode_config;
>  
> +	err = komeda_kms_add_wb_connectors(kms, mdev);
> +	if (err)
> +		goto cleanup_mode_config;
> +
>  	err = component_bind_all(mdev->dev, kms);
>  	if (err)
>  		goto cleanup_mode_config;
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_kms.h b/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> index ac3d9209b4d9..f16e9e577593 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_kms.h
> @@ -12,6 +12,7 @@
>  #include <drm/drm_crtc_helper.h>
>  #include <drm/drm_device.h>
>  #include <drm/drm_writeback.h>
> +#include <drm/drm_print.h>
>  #include <video/videomode.h>
>  #include <video/display_timing.h>
>  
> @@ -73,6 +74,9 @@ struct komeda_crtc {
>  	 */
>  	struct komeda_pipeline *slave;
>  
> +	/** @wb_conn: komeda write back connector */
> +	struct komeda_wb_connector *wb_conn;
> +
>  	/** @disable_done: this flip_done is for tracing the disable */
>  	struct completion *disable_done;
>  };
> @@ -116,6 +120,27 @@ struct komeda_kms_dev {
>  #define to_kcrtc(p)	container_of(p, struct komeda_crtc, base)
>  #define to_kcrtc_st(p)	container_of(p, struct komeda_crtc_state, base)
>  #define to_kdev(p)	container_of(p, struct komeda_kms_dev, base)
> +#define to_wb_conn(x)	container_of(x, struct drm_writeback_connector, base)
> +
> +static inline bool is_writeback_only(struct drm_crtc_state *st)
> +{
> +	struct komeda_wb_connector *wb_conn = to_kcrtc(st->crtc)->wb_conn;
> +	struct drm_connector *conn = wb_conn ? &wb_conn->base.base : NULL;
> +
> +	return conn && (st->connector_mask == BIT(drm_connector_index(conn)));
> +}
> +
> +static inline bool
> +is_only_changed_connector(struct drm_crtc_state *st, struct drm_connector *conn)
> +{
> +	struct drm_crtc_state *old_st;
> +	u32 changed_connectors;
> +
> +	old_st = drm_atomic_get_old_crtc_state(st->state, st->crtc);
> +	changed_connectors = st->connector_mask ^ old_st->connector_mask;
> +
> +	return BIT(drm_connector_index(conn)) == changed_connectors;
> +}
>  
>  int komeda_kms_setup_crtcs(struct komeda_kms_dev *kms, struct komeda_dev *mdev);
>  
> @@ -123,6 +148,8 @@ int komeda_kms_add_crtcs(struct komeda_kms_dev *kms, struct komeda_dev *mdev);
>  int komeda_kms_add_planes(struct komeda_kms_dev *kms, struct komeda_dev *mdev);
>  int komeda_kms_add_private_objs(struct komeda_kms_dev *kms,
>  				struct komeda_dev *mdev);
> +int komeda_kms_add_wb_connectors(struct komeda_kms_dev *kms,
> +				 struct komeda_dev *mdev);
>  void komeda_kms_cleanup_private_objs(struct komeda_kms_dev *kms);
>  
>  void komeda_crtc_handle_event(struct komeda_crtc   *kcrtc,
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> index bae8a32b81a6..1b7e933ea303 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h
> @@ -423,10 +423,17 @@ struct komeda_plane_state;
>  struct komeda_crtc_state;
>  struct komeda_crtc;
>  
> +void pipeline_composition_size(struct komeda_crtc_state *kcrtc_st,
> +			       u16 *hsize, u16 *vsize);
> +
>  int komeda_build_layer_data_flow(struct komeda_layer *layer,
>  				 struct komeda_plane_state *kplane_st,
>  				 struct komeda_crtc_state *kcrtc_st,
>  				 struct komeda_data_flow_cfg *dflow);
> +int komeda_build_wb_data_flow(struct komeda_layer *wb_layer,
> +			      struct drm_connector_state *conn_st,
> +			      struct komeda_crtc_state *kcrtc_st,
> +			      struct komeda_data_flow_cfg *dflow);
>  int komeda_build_display_data_flow(struct komeda_crtc *kcrtc,
>  				   struct komeda_crtc_state *kcrtc_st);
>  
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> index 36570d7dad61..9748c9438868 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c
> @@ -308,8 +308,41 @@ komeda_layer_validate(struct komeda_layer *layer,
>  	return 0;
>  }
>  
> -static void pipeline_composition_size(struct komeda_crtc_state *kcrtc_st,
> -				      u16 *hsize, u16 *vsize)
> +static int
> +komeda_wb_layer_validate(struct komeda_layer *wb_layer,
> +			 struct drm_connector_state *conn_st,
> +			 struct komeda_data_flow_cfg *dflow)
> +{
> +	struct komeda_fb *kfb = to_kfb(conn_st->writeback_job->fb);
> +	struct komeda_component_state *c_st;
> +	struct komeda_layer_state *st;
> +	int i;
> +
> +	if (!komeda_fb_is_layer_supported(kfb, wb_layer->layer_type))
> +		return -EINVAL;
> +
> +	c_st = komeda_component_get_state_and_set_user(&wb_layer->base,
> +			conn_st->state, conn_st->connector, conn_st->crtc);
> +	if (IS_ERR(c_st))
> +		return PTR_ERR(c_st);
> +
> +	st = to_layer_st(c_st);
> +
> +	st->hsize = dflow->out_w;
> +	st->vsize = dflow->out_h;
> +
> +	for (i = 0; i < kfb->base.format->num_planes; i++)
> +		st->addr[i] = komeda_fb_get_pixel_addr(kfb, dflow->out_x,
> +						       dflow->out_y, i);
> +
> +	komeda_component_add_input(&st->base, &dflow->input, 0);
> +	komeda_component_set_output(&dflow->input, &wb_layer->base, 0);
> +
> +	return 0;
> +}
> +
> +void pipeline_composition_size(struct komeda_crtc_state *kcrtc_st,
> +			       u16 *hsize, u16 *vsize)
>  {
>  	struct drm_display_mode *m = &kcrtc_st->base.adjusted_mode;
>  
> @@ -478,6 +511,20 @@ int komeda_build_layer_data_flow(struct komeda_layer *layer,
>  	return err;
>  }
>  
> +int komeda_build_wb_data_flow(struct komeda_layer *wb_layer,
> +			      struct drm_connector_state *conn_st,
> +			      struct komeda_crtc_state *kcrtc_st,
> +			      struct komeda_data_flow_cfg *dflow)
> +{
> +	if ((dflow->in_w != dflow->out_w) ||
> +	    (dflow->in_h != dflow->out_h)) {
> +		DRM_DEBUG_ATOMIC("current do not support scaling writeback.\n");
> +		return -EINVAL;
> +	}
> +
> +	return komeda_wb_layer_validate(wb_layer, conn_st, dflow);
> +}
> +
>  /* build display output data flow, the data path is:
>   * compiz -> improc -> timing_ctrlr
>   */
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_private_obj.c b/drivers/gpu/drm/arm/display/komeda/komeda_private_obj.c
> index a54878cbd6e4..d53bd6c23c5d 100644
> --- a/drivers/gpu/drm/arm/display/komeda/komeda_private_obj.c
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_private_obj.c
> @@ -252,6 +252,12 @@ int komeda_kms_add_private_objs(struct komeda_kms_dev *kms,
>  				return err;
>  		}
>  
> +		if (pipe->wb_layer) {
> +			err = komeda_layer_obj_add(kms, pipe->wb_layer);
> +			if (err)
> +				return err;
> +		}
> +
>  		err = komeda_compiz_obj_add(kms, pipe->compiz);
>  		if (err)
>  			return err;
> diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> new file mode 100644
> index 000000000000..0c1a4220c280
> --- /dev/null
> +++ b/drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c
> @@ -0,0 +1,181 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * (C) COPYRIGHT 2018 ARM Limited. All rights reserved.
> + * Author: James.Qian.Wang <james.qian.wang@xxxxxxx>
> + *
> + */
> +#include "komeda_dev.h"
> +#include "komeda_kms.h"
> +
> +static int
> +komeda_wb_init_data_flow(struct komeda_layer *wb_layer,
> +			 struct drm_connector_state *conn_st,
> +			 struct komeda_crtc_state *kcrtc_st,
> +			 struct komeda_data_flow_cfg *dflow)
> +{
> +	struct drm_framebuffer *fb = conn_st->writeback_job ?
> +				     conn_st->writeback_job->fb : NULL;
> +
> +	if (!fb)
> +		return -EINVAL;
> +
> +	memset(dflow, 0, sizeof(*dflow));
> +
> +	dflow->out_w = fb->width;
> +	dflow->out_h = fb->height;
> +
> +	/* the write back data comes from the compiz */
> +	pipeline_composition_size(kcrtc_st, &dflow->in_w, &dflow->in_h);
> +	dflow->input.component = &wb_layer->base.pipeline->compiz->base;
> +	/* compiz doesn't output alpha */
> +	dflow->pixel_blend_mode = DRM_MODE_BLEND_PIXEL_NONE;
> +	dflow->rot = DRM_MODE_ROTATE_0;
> +
> +	return 0;
> +}
> +
> +static int
> +komeda_wb_encoder_atomic_check(struct drm_encoder *encoder,
> +			       struct drm_crtc_state *crtc_st,
> +			       struct drm_connector_state *conn_st)
> +{
> +	struct komeda_crtc_state *kcrtc_st = to_kcrtc_st(crtc_st);
> +	struct komeda_layer *wb_layer;
> +	struct komeda_data_flow_cfg dflow;
> +	int err;
> +
> +	if (!crtc_st->active) {
> +		DRM_DEBUG_ATOMIC("Cannot write the composition result out on a inactive CRTC.\n");
> +		return -EINVAL;
> +	}
> +
> +	wb_layer = to_kconn(to_wb_conn(conn_st->connector))->wb_layer;
> +
> +	/*
> +	 * No need for a full modested when the only connector changed is the
> +	 * writeback connector.
> +	 */
> +	if (crtc_st->connectors_changed &&
> +	    is_only_changed_connector(crtc_st, conn_st->connector))
> +		crtc_st->connectors_changed = false;
> +
> +	err = komeda_wb_init_data_flow(wb_layer, conn_st, kcrtc_st, &dflow);
> +	if (err)
> +		return err;
> +
> +	return komeda_build_wb_data_flow(wb_layer, conn_st, kcrtc_st, &dflow);
> +}
> +
> +static const struct drm_encoder_helper_funcs komeda_wb_encoder_helper_funcs = {
> +	.atomic_check = komeda_wb_encoder_atomic_check,
> +};
> +
> +static int
> +komeda_wb_connector_get_modes(struct drm_connector *connector)
> +{
> +	return 0;
> +}
Can we remove this ?

> +
> +static enum drm_mode_status
> +komeda_wb_connector_mode_valid(struct drm_connector *connector,
> +			       struct drm_display_mode *mode)
> +{
> +	struct drm_device *dev = connector->dev;
> +	struct drm_mode_config *mode_config = &dev->mode_config;
> +	int w = mode->hdisplay, h = mode->vdisplay;
> +
> +	if ((w < mode_config->min_width) || (w > mode_config->max_width))
> +		return MODE_BAD_HVALUE;
> +
> +	if ((h < mode_config->min_height) || (h > mode_config->max_height))
> +		return MODE_BAD_VVALUE;
> +
> +	return MODE_OK;
> +}
> +
> +static const struct drm_connector_helper_funcs komeda_wb_conn_helper_funcs = {
> +	.get_modes	= komeda_wb_connector_get_modes,
> +	.mode_valid	= komeda_wb_connector_mode_valid,
> +};
> +
> +static enum drm_connector_status
> +komeda_wb_connector_detect(struct drm_connector *connector, bool force)
> +{
> +	return connector_status_connected;
> +}
> +
> +static int
> +komeda_wb_connector_fill_modes(struct drm_connector *connector,
> +			       uint32_t maxX, uint32_t maxY)
> +{
> +	return 0;
> +}
Can we remove this as well ?

> +
> +static void komeda_wb_connector_destroy(struct drm_connector *connector)
> +{
> +	drm_connector_cleanup(connector);
> +	kfree(to_kconn(to_wb_conn(connector)));
> +}
> +
> +static const struct drm_connector_funcs komeda_wb_connector_funcs = {
> +	.reset			= drm_atomic_helper_connector_reset,
> +	.detect			= komeda_wb_connector_detect,
> +	.fill_modes		= komeda_wb_connector_fill_modes,
> +	.destroy		= komeda_wb_connector_destroy,
> +	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int komeda_wb_connector_add(struct komeda_kms_dev *kms,
> +				   struct komeda_crtc *kcrtc)
> +{
> +	struct komeda_dev *mdev = kms->base.dev_private;
> +	struct komeda_wb_connector *kwb_conn;
> +	struct drm_writeback_connector *wb_conn;
> +	u32 *formats, n_formats = 0;
> +	int err;
> +
> +	if (!kcrtc->master->wb_layer)
> +		return 0;
> +
> +	kwb_conn = kzalloc(sizeof(*wb_conn), GFP_KERNEL);
> +	if (!kwb_conn)
> +		return -ENOMEM;
> +
> +	kwb_conn->wb_layer = kcrtc->master->wb_layer;
> +
> +	wb_conn = &kwb_conn->base;
> +	wb_conn->encoder.possible_crtcs = BIT(drm_crtc_index(&kcrtc->base));
> +
> +	formats = komeda_get_layer_fourcc_list(&mdev->fmt_tbl,
> +					       kwb_conn->wb_layer->layer_type,
> +					       &n_formats);
> +
We be doing a null check on formats here as we are dereferencing it
in the next function.

> +	err = drm_writeback_connector_init(&kms->base, wb_conn,
> +					   &komeda_wb_connector_funcs,
> +					   &komeda_wb_encoder_helper_funcs,
> +					   formats, n_formats);
> +	komeda_put_fourcc_list(formats);
> +	if (err)
> +		return err;
> +
> +	drm_connector_helper_add(&wb_conn->base, &komeda_wb_conn_helper_funcs);
> +
> +	kcrtc->wb_conn = kwb_conn;
> +
> +	return 0;
> +}
> +
> +int komeda_kms_add_wb_connectors(struct komeda_kms_dev *kms,
> +				 struct komeda_dev *mdev)
> +{
> +	int i, err;
> +
> +	for (i = 0; i < kms->n_crtcs; i++) {
> +		err = komeda_wb_connector_add(kms, &kms->crtcs[i]);
> +		if (err)
> +			return err;
> +	}
> +
> +	return 0;
> +}
> -- 
> 2.17.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux