[Bug 110371] HP Dreamcolor display *Error* No EDID read

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Comment # 11 on bug 110371 from
Created attachment 144277 [details]
EDID file

Don't know if this helps but ALL kernels seem affected by not being able to
grab EDID on startup but the changes after 4.18 break something further as to
make the display unusable by changing the default behavior of the panel's mode
without EDID.

[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.20
root=/dev/sdb2 ro amdgpu.ppfeaturemask=0xffffffff amdgpu.dpm=1 amdgpu.dc=1
amdgpu.gpu_recovery=1 amdgpu.powerplay=1 drm.edid_firmware=eDP-1:edid/edid.bin
[    4.340989] [drm] Got external EDID base block and 0 extensions from
"edid/edid.bin" for connector "eDP-1"
[    4.451624]  drm_do_probe_ddc_edid+0xb9/0x130
[    4.451628]  ? drm_edid_block_valid+0x180/0x180
[    4.451629]  drm_do_get_edid+0xb1/0x330
[    4.451631]  drm_get_edid+0x61/0x380
[    4.451671]  dm_helpers_read_local_edid+0x4c/0xe0 [amdgpu]
[    4.630956]  drm_do_probe_ddc_edid+0xb9/0x130
[    4.630966]  ? drm_edid_block_valid+0x180/0x180
[    4.630969]  drm_do_get_edid+0xb1/0x330
[    4.630972]  drm_get_edid+0x61/0x380
[    4.631115]  dm_helpers_read_local_edid+0x4c/0xe0 [amdgpu]
[    4.801879]  drm_do_probe_ddc_edid+0xb9/0x130
[    4.801889]  ? drm_edid_block_valid+0x180/0x180
[    4.801892]  drm_do_get_edid+0xb1/0x330
[    4.801895]  drm_get_edid+0x61/0x380
[    4.802006]  dm_helpers_read_local_edid+0x4c/0xe0 [amdgpu]
[    4.972889]  drm_do_probe_ddc_edid+0xb9/0x130
[    4.972900]  ? drm_edid_block_valid+0x180/0x180
[    4.972903]  drm_do_get_edid+0xb1/0x330
[    4.972907]  drm_get_edid+0x61/0x380
[    4.973028]  dm_helpers_read_local_edid+0x4c/0xe0 [amdgpu]
[    5.145825]  drm_do_probe_ddc_edid+0xb9/0x130
[    5.145835]  ? drm_edid_block_valid+0x180/0x180
[    5.145837]  drm_do_get_edid+0xb1/0x330
[    5.145841]  drm_get_edid+0x61/0x380
[    5.145942]  dm_helpers_read_local_edid+0x4c/0xe0 [amdgpu]
[    5.170556] [drm:dc_link_detect [amdgpu]] *ERROR* No EDID read.

Is what happens when I set the edid manually from the kernel commandline.

Setting it manually freaks out newer kernels and my display won't modeset
properly making it a mess but on 4.18 it seemed to drop this.

Any debug patches I can run to help you guys figure it out?
I have included my EDID file if you want to run it through anything to see what
breaks.


You are receiving this mail because:
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux