To make use of the new eLCDIF DRM driver OF graph description is required. Describe the display using OF graph nodes. Cc: stable@xxxxxxxxxxxxxxx # v4.19 Signed-off-by: Sébastien Szymanski <sebastien.szymanski@xxxxxxxxxxxx> --- arch/arm/boot/dts/imx6ul-opos6uldev.dts | 37 +++++++++++-------------- 1 file changed, 16 insertions(+), 21 deletions(-) diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts index 0e59ee57fd55..8ecdb9ad2b2e 100644 --- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts +++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts @@ -56,7 +56,7 @@ stdout-path = &uart1; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm3 0 191000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -97,6 +97,18 @@ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; }; + panel: panel { + compatible = "armadeus,st0700-adapt"; + power-supply = <®_3v3>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + reg_5v: regulator-5v { compatible = "regulator-fixed"; regulator-name = "5V"; @@ -182,28 +194,11 @@ &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif>; - display = <&display0>; - lcd-supply = <®_3v3>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <18>; - - display-timings { - timing0: timing0 { - clock-frequency = <33000033>; - hactive = <800>; - vactive = <480>; - hback-porch = <96>; - hfront-porch = <96>; - vback-porch = <20>; - vfront-porch = <21>; - hsync-len = <64>; - vsync-len = <4>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; -- 2.19.2 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel