On Tue, 2019-04-16 at 14:04 +0800, Jitao Shi wrote:
> Config the different CMDQ reg address in driver data.
>
For MT8173, you change reg_cmd_off from 0x180 to 0x200, so this patch is
a bug fix. You should add a 'Fixes' tag.
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 39 +++++++++++++++++++++++-------
> 1 file changed, 30 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 6c4ac37f983d..573e6bec6d36 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -131,7 +131,6 @@
> #define VM_CMD_EN BIT(0)
> #define TS_VFP_EN BIT(5)
>
> -#define DSI_CMDQ0 0x180
> #define CONFIG (0xff << 0)
> #define SHORT_PACKET 0
> #define LONG_PACKET 2
> @@ -156,6 +155,10 @@
>
> struct phy;
>
> +struct mtk_dsi_driver_data {
> + const u32 reg_cmdq_off;
> +};
> +
> struct mtk_dsi {
> struct mtk_ddp_comp ddp_comp;
> struct device *dev;
> @@ -182,6 +185,7 @@ struct mtk_dsi {
> bool enabled;
> u32 irq_data;
> wait_queue_head_t irq_wait_queue;
> + struct mtk_dsi_driver_data *driver_data;
> };
>
> static inline struct mtk_dsi *encoder_to_dsi(struct drm_encoder *e)
> @@ -934,6 +938,7 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
> const char *tx_buf = msg->tx_buf;
> u8 config, cmdq_size, cmdq_off, type = msg->type;
> u32 reg_val, cmdq_mask, i;
> + u32 reg_cmdq_off = dsi->driver_data->reg_cmdq_off;
>
> if (MTK_DSI_HOST_IS_READ(type))
> config = BTA;
> @@ -953,9 +958,11 @@ static void mtk_dsi_cmdq(struct mtk_dsi *dsi, const struct mipi_dsi_msg *msg)
> }
>
> for (i = 0; i < msg->tx_len; i++)
> - writeb(tx_buf[i], dsi->regs + DSI_CMDQ0 + cmdq_off + i);
> + mtk_dsi_mask(dsi, (reg_cmdq_off + cmdq_off + i) & (~0x3U),
> + (0xffUL << (((i + cmdq_off) & 3U) * 8U)),
> + tx_buf[i] << (((i + cmdq_off) & 3U) * 8U));
You say you would follow Nicolas' suggestion here.
>
> - mtk_dsi_mask(dsi, DSI_CMDQ0, cmdq_mask, reg_val);
> + mtk_dsi_mask(dsi, reg_cmdq_off, cmdq_mask, reg_val);
> mtk_dsi_mask(dsi, DSI_CMDQ_SIZE, CMDQ_SIZE, cmdq_size);
> }
>
> @@ -1074,10 +1081,27 @@ static const struct component_ops mtk_dsi_component_ops = {
> .unbind = mtk_dsi_unbind,
> };
>
> +static const struct mtk_dsi_driver_data mt8173_dsi_driver_data = {
> + .reg_cmdq_off = 0x200,
> +};
> +
> +static const struct mtk_dsi_driver_data mt2701_dsi_driver_data = {
> + .reg_cmdq_off = 0x180,
> +};
> +
> +static const struct of_device_id mtk_dsi_of_match[] = {
> + { .compatible = "mediatek,mt2701-dsi",
> + .data = &mt2701_dsi_driver_data },
> + { .compatible = "mediatek,mt8173-dsi",
> + .data = &mt8173_dsi_driver_data },
> + { },
> +};
> +
> static int mtk_dsi_probe(struct platform_device *pdev)
> {
> struct mtk_dsi *dsi;
> struct device *dev = &pdev->dev;
> + const struct of_device_id *of_id;
> struct resource *regs;
> int irq_num;
> int comp_id;
> @@ -1101,6 +1125,9 @@ static int mtk_dsi_probe(struct platform_device *pdev)
> if (ret)
> goto err_unregister_host;
>
> + of_id = of_match_device(mtk_dsi_of_match, &pdev->dev);
> + dsi->driver_data = of_id->data;
Maybe use of_device_get_match_data() is a more simple way. You could
refer to [1].
[1]
https://elixir.bootlin.com/linux/v5.1/source/drivers/gpu/drm/mediatek/mtk_disp_ovl.c#L300
Regards,
CK
> +
> dsi->engine_clk = devm_clk_get(dev, "engine");
> if (IS_ERR(dsi->engine_clk)) {
> ret = PTR_ERR(dsi->engine_clk);
> @@ -1193,12 +1220,6 @@ static int mtk_dsi_remove(struct platform_device *pdev)
> return 0;
> }
>
> -static const struct of_device_id mtk_dsi_of_match[] = {
> - { .compatible = "mediatek,mt2701-dsi" },
> - { .compatible = "mediatek,mt8173-dsi" },
> - { },
> -};
> -
> struct platform_driver mtk_dsi_driver = {
> .probe = mtk_dsi_probe,
> .remove = mtk_dsi_remove,
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
