https://bugzilla.kernel.org/show_bug.cgi?id=201273 --- Comment #52 from Marco (rodomar705@xxxxxxxxxxxxxx) --- (In reply to Marco from comment #51) > (In reply to Alex Deucher from comment #49) > > Can you still log in remotely via ssh and get an updated dmesg? If it's a > > blank screen, can you try another display connector on the board? The > > amdgpu.dc option switches between the old simpler display code (dc=0) and > > the newer display code that support more advanced features like audio and > DP > > MST (dc=1). There is no firmware in the display engine for this asic. > > As stated above, it was connected through DVI-D and I already tried with > HDMI, but no signal from anywhere. > > For the firmware, it was my mistake since I was reading a version number > when it was enabled in the module, and I automatically assumed that was a > firmware version uploaded to the ASIC, my bad. > > Regardless as the above, I've rebooted 25 times yesterday, and I can't > reproduce the problem again, unfortunately (to me anyway is fine :P); if I > get the problem again now I have an SSH server enabled so I'll surely post > the dmesg (even if I doubt I'll be able to connect, since when it was > presenting I wasn't even able to trigger an ACPI graceful powerdown by > pressing the power button). (Anywhere besides DP, since I don't have a close monitor by hand with DP) -- You are receiving this mail because: You are watching the assignee of the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
