On 25/04/2019 05:14, Heiner Kallweit wrote:
> Use new helper pci_dev_id() to simplify the code.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Reviewed-by: Alexey Kardashevskiy <aik@xxxxxxxxx>
> ---
> arch/powerpc/platforms/powernv/npu-dma.c | 14 ++++++--------
> 1 file changed, 6 insertions(+), 8 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
> index dc23d9d2a..495550432 100644
> --- a/arch/powerpc/platforms/powernv/npu-dma.c
> +++ b/arch/powerpc/platforms/powernv/npu-dma.c
> @@ -1213,9 +1213,8 @@ int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid,
> * Currently we only support radix and non-zero LPCR only makes sense
> * for hash tables so skiboot expects the LPCR parameter to be a zero.
> */
> - ret = opal_npu_map_lpar(nphb->opal_id,
> - PCI_DEVID(gpdev->bus->number, gpdev->devfn), lparid,
> - 0 /* LPCR bits */);
> + ret = opal_npu_map_lpar(nphb->opal_id, pci_dev_id(gpdev), lparid,
> + 0 /* LPCR bits */);
> if (ret) {
> dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret);
> return ret;
> @@ -1224,7 +1223,7 @@ int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid,
> dev_dbg(&gpdev->dev, "init context opalid=%llu msr=%lx\n",
> nphb->opal_id, msr);
> ret = opal_npu_init_context(nphb->opal_id, 0/*__unused*/, msr,
> - PCI_DEVID(gpdev->bus->number, gpdev->devfn));
> + pci_dev_id(gpdev));
> if (ret < 0)
> dev_err(&gpdev->dev, "Failed to init context: %d\n", ret);
> else
> @@ -1258,7 +1257,7 @@ int pnv_npu2_unmap_lpar_dev(struct pci_dev *gpdev)
> dev_dbg(&gpdev->dev, "destroy context opalid=%llu\n",
> nphb->opal_id);
> ret = opal_npu_destroy_context(nphb->opal_id, 0/*__unused*/,
> - PCI_DEVID(gpdev->bus->number, gpdev->devfn));
> + pci_dev_id(gpdev));
> if (ret < 0) {
> dev_err(&gpdev->dev, "Failed to destroy context: %d\n", ret);
> return ret;
> @@ -1266,9 +1265,8 @@ int pnv_npu2_unmap_lpar_dev(struct pci_dev *gpdev)
>
> /* Set LPID to 0 anyway, just to be safe */
> dev_dbg(&gpdev->dev, "Map LPAR opalid=%llu lparid=0\n", nphb->opal_id);
> - ret = opal_npu_map_lpar(nphb->opal_id,
> - PCI_DEVID(gpdev->bus->number, gpdev->devfn), 0 /*LPID*/,
> - 0 /* LPCR bits */);
> + ret = opal_npu_map_lpar(nphb->opal_id, pci_dev_id(gpdev), 0 /*LPID*/,
> + 0 /* LPCR bits */);
> if (ret)
> dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret);
>
>
--
Alexey
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
