Hi Matt,
Thank you for the patch.
On Wed, Apr 24, 2019 at 02:21:40PM +0000, Matt Redfearn wrote:
> The Synopsys manual states that software should wait for all active
> lanes to reach stop state (User manual section 3.1.5). Currently the
> driver only waits for / checks that the clock lane is in stop state. Fix
> this by waiting for the mask of PHY STATUS bits corresponding to the
> active lanes to be set.
>
> Signed-off-by: Matt Redfearn <matt.redfearn@xxxxxxxxxx>
I don't have access to the datasheet, but the change makes sense.
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
>
> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> index bd15c21a177..38e88071363 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -189,6 +189,10 @@
> #define DSI_PHY_TX_TRIGGERS 0xac
>
> #define DSI_PHY_STATUS 0xb0
> +#define PHY_STOP_STATE_LANE_3 BIT(11)
> +#define PHY_STOP_STATE_LANE_2 BIT(9)
> +#define PHY_STOP_STATE_LANE_1 BIT(7)
> +#define PHY_STOP_STATE_LANE_0 BIT(4)
> #define PHY_STOP_STATE_CLK_LANE BIT(2)
> #define PHY_LOCK BIT(0)
>
> @@ -752,7 +756,7 @@ static void dw_mipi_dsi_dphy_init(struct dw_mipi_dsi *dsi)
>
> static void dw_mipi_dsi_dphy_enable(struct dw_mipi_dsi *dsi)
> {
> - u32 val;
> + u32 val, mask;
> int ret;
>
> dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
> @@ -763,11 +767,16 @@ static void dw_mipi_dsi_dphy_enable(struct dw_mipi_dsi *dsi)
> if (ret)
> DRM_DEBUG_DRIVER("failed to wait phy lock state\n");
>
> + mask = PHY_STOP_STATE_CLK_LANE | PHY_STOP_STATE_LANE_0;
> + mask |= (dsi->lanes >= 2) ? PHY_STOP_STATE_LANE_1 : 0;
> + mask |= (dsi->lanes >= 3) ? PHY_STOP_STATE_LANE_2 : 0;
> + mask |= (dsi->lanes == 4) ? PHY_STOP_STATE_LANE_3 : 0;
> +
> ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
> - val, val & PHY_STOP_STATE_CLK_LANE, 1000,
> + val, (val & mask) == mask, 1000,
> PHY_STATUS_TIMEOUT_US);
> if (ret)
> - DRM_DEBUG_DRIVER("failed to wait phy clk lane stop state\n");
> + DRM_DEBUG_DRIVER("failed to wait phy stop state\n");
> }
>
> static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
