Re: Support for 2D engines/blitters in V4L2 and DRM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2019-04-24 2:01 p.m., Nicolas Dufresne wrote:
> Le mercredi 24 avril 2019 à 10:31 +0200, Michel Dänzer a écrit :
>> On 2019-04-19 10:38 a.m., Paul Kocialkowski wrote:
>>> On Thu, 2019-04-18 at 20:30 -0400, Nicolas Dufresne wrote:
>>>> Le jeudi 18 avril 2019 à 10:18 +0200, Daniel Vetter a écrit :
>>
>>>> In the first, we'd need a mechanism where we can schedule a render at a
>>>> specific time or vblank. We can of course already implement this in
>>>> software, but with fences, the scheduling would need to be done in the
>>>> driver. Then if the fence is signalled earlier, the driver should hold
>>>> on until the delay is met. If the fence got signalled late, we also
>>>> need to think of a workflow. As we can't schedule more then one render
>>>> in DRM at one time, I don't really see yet how to make that work.
>>>
>>> Indeed, that's also one of the main issues I've spotted. Before using
>>> an implicit fence, we basically have to make sure the frame is due for
>>> display at the next vblank. Otherwise, we need to refrain from using
>>> the fence and schedule the flip later, which is kind of counter-
>>> productive.
>>
>> Fences are about signalling that the contents of a frame are "done" and
>> ready to be presented. They're not about specifying which frame is to be
>> presented when.
>>
>>
>>> I feel like specifying a target vblank would be a good unit for that,
>>
>> The mechanism described above works for that.
>>
>>> since it's our native granularity after all (while a timestamp is not).
>>
>> Note that variable refresh rate (Adaptive Sync / FreeSync / G-Sync)
>> changes things in this regard. It makes the vblank length variable, and
>> if you wait for multiple vblanks between flips, you get the maximum
>> vblank length corresponding to the minimum refresh rate / timing
>> granularity. Thus, it would be useful to allow userspace to specify a
>> timestamp corresponding to the earliest time when the flip is to
>> complete. The kernel could then try to hit that as closely as possible.
> 
> Rendering a video stream is more complex then what you describe here.
> Whenever there is a unexpected delay (late delivery of a frame as an
> example) you may endup in situation where one frame is ready after the
> targeted vblank. If there is another frame that targets the following
> vblank that gets ready on-time, the previous frame should be replaced
> by the most recent one.
> 
> With fences, what happens is that even if you received the next frame
> on time, naively replacing it is not possible, because we don't know
> when the fence for the next frame will be signalled. If you simply
> always replace the current frame, you may endup skipping a lot more
> vblank then what you expect, and that results in jumpy playback.

So you want to be able to replace a queued flip with another one then.
That doesn't necessarily require allowing more than one flip to be
queued ahead of time.

Note that this can also be done in userspace with explicit fencing (by
only selecting a frame and submitting it to the kernel after all
corresponding fences have signalled), at least to some degree, but the
kernel should be able to do it up to a later point in time and more
reliably, with less risk of missing a flip for a frame which becomes
ready just in time.


> Render queues with timestamp are used to smooth rendering and handle
> rendering collision so that the latency is kept low (like when you have
> a 100fps video over a 60Hz display). This is normally done in
> userspace, but with fences, you ask the kernel to render something in
> an unpredictable future, so we loose the ability to make the final
> decision.

That's just not what fences are intended to be used for with the current
KMS UAPI.


-- 
Earthling Michel Dänzer               |              https://www.amd.com
Libre software enthusiast             |             Mesa and X developer
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux