commit d6abe6df706c (drm/bridge: sil_sii8620: do not have a dependency
of RC_CORE) changed the driver to select both RC_CORE and INPUT.
However, this causes problems with other drivers, in particular an input
driver that depends on MFD_INTEL_LPSS_PCI (to be added in a separate
commit):
drivers/clk/Kconfig:9:error: recursive dependency detected!
drivers/clk/Kconfig:9: symbol COMMON_CLK is selected by MFD_INTEL_LPSS
drivers/mfd/Kconfig:566: symbol MFD_INTEL_LPSS is selected by MFD_INTEL_LPSS_PCI
drivers/mfd/Kconfig:580: symbol MFD_INTEL_LPSS_PCI is implied by KEYBOARD_APPLESPI
drivers/input/keyboard/Kconfig:73: symbol KEYBOARD_APPLESPI depends on INPUT
drivers/input/Kconfig:8: symbol INPUT is selected by DRM_SIL_SII8620
drivers/gpu/drm/bridge/Kconfig:83: symbol DRM_SIL_SII8620 depends on DRM_BRIDGE
drivers/gpu/drm/bridge/Kconfig:1: symbol DRM_BRIDGE is selected by DRM_PL111
drivers/gpu/drm/pl111/Kconfig:1: symbol DRM_PL111 depends on COMMON_CLK
According to the docs and general consensus, select should only be used
for non user-visible symbols, but both RC_CORE and INPUT are
user-visible. Furthermore almost all other references to INPUT
throughout the kernel config are depends, not selects. For this reason
the first part of this change reverts commit d6abe6df706c.
In order to address the original reason for commit d6abe6df706c, namely
that not all boards use the remote controller functionality and hence
should not need have to deal with RC_CORE, the second part of this
change now makes the remote control support in the driver optional and
contingent on RC_CORE being defined. And with this the hard dependency
on INPUT also goes away as that is only needed if RC_CORE is defined
(which in turn already depends on INPUT).
CC: Inki Dae <inki.dae@xxxxxxxxxxx>
CC: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
CC: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
CC: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Signed-off-by: Ronald Tschalär <ronald@xxxxxxxxxxxxx>
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
---
drivers/gpu/drm/bridge/Kconfig | 3 +--
drivers/gpu/drm/bridge/sil-sii8620.c | 10 +++++++---
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 2fee47b0d50b..9cf07105b73a 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -85,8 +85,7 @@ config DRM_SIL_SII8620
depends on OF
select DRM_KMS_HELPER
imply EXTCON
- select INPUT
- select RC_CORE
+ imply RC_CORE
help
Silicon Image SII8620 HDMI/MHL bridge chip driver.
diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
index a6e8f4591e63..cff3131aae6c 100644
--- a/drivers/gpu/drm/bridge/sil-sii8620.c
+++ b/drivers/gpu/drm/bridge/sil-sii8620.c
@@ -1763,10 +1763,8 @@ static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
scancode &= MHL_RCP_KEY_ID_MASK;
- if (!ctx->rc_dev) {
- dev_dbg(ctx->dev, "RCP input device not initialized\n");
+ if (!IS_ENABLED(CONFIG_RC_CORE) || !ctx->rc_dev)
return false;
- }
if (pressed)
rc_keydown(ctx->rc_dev, RC_PROTO_CEC, scancode, 0);
@@ -2103,6 +2101,9 @@ static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
struct rc_dev *rc_dev;
int ret;
+ if (!IS_ENABLED(CONFIG_RC_CORE))
+ return;
+
rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
if (!rc_dev) {
dev_err(ctx->dev, "Failed to allocate RC device\n");
@@ -2217,6 +2218,9 @@ static void sii8620_detach(struct drm_bridge *bridge)
{
struct sii8620 *ctx = bridge_to_sii8620(bridge);
+ if (!IS_ENABLED(CONFIG_RC_CORE))
+ return;
+
rc_unregister_device(ctx->rc_dev);
}
--
2.20.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
