Hi,
On Mon, 2019-02-11 at 15:41 +0100, Maxime Ripard wrote:
> The DRQ calculation code in the Allwinner BSP uses the vertical front
> porch value as the condition, but we're using the video back porch.
>
> Since I always confuse the two, and I'm the original author of that code, I
> guess I deserved a brown paper bag.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
Assuming that the BSP's hbp is referring to the back porch only, then
calculating ht - x - hbp does give us the front porch + hsync length.
Well, let's guess that this about the front porch only until we know
better. It's certainly better than using the back porch anyway :)
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
Cheers,
Paul
> ---
> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index 2518a0d7567c..8e6392831e9d 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -372,9 +372,9 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
> struct mipi_dsi_device *device = dsi->device;
> u32 val = 0;
>
> - if ((mode->hsync_end - mode->hdisplay) > 20) {
> + if ((mode->hsync_start - mode->hdisplay) > 20) {
> /* Maaaaaagic */
> - u16 drq = (mode->hsync_end - mode->hdisplay) - 20;
> + u16 drq = (mode->hsync_start - mode->hdisplay) - 20;
>
> drq *= mipi_dsi_pixel_format_to_bpp(device->format);
> drq /= 32;
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
