Re: [PATCH v3 2/7] dt-bindings: bus: Add binding for the Allwinner MBUS controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/02/2019 15:02, Maxime Ripard wrote:
The MBUS controller drives the MBUS that other devices in the SoC will
use to perform DMA. It also has a register interface that allows to
monitor and control the bandwidth and priorities for masters on that
bus.

Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
---
  Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt | 36 +++++++-
  1 file changed, 36 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt

diff --git a/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt b/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt
new file mode 100644
index 000000000000..e72b7ac9e359
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/sunxi-mbus.txt
@@ -0,0 +1,36 @@
+Allwinner Memory Bus (MBUS) controller
+
+The MBUS controller drives the MBUS that other devices in the SoC will
+use to perform DMA. It also has a register interface that allows to
+monitor and control the bandwidth and priorities for masters on that
+bus.
+
+Required properties:
+ - compatible: Must be one of:
+	- allwinner,sun5i-a13-mbus
+ - reg: Offset and length of the register set for the controller
+ - clocks: phandle to the clock driving the controller
+ - dma-ranges: see booting-without-of.txt

Nit: this is a standard property in DTSpec, so it's probably better to refer to that rather than Linux-specific documentation.

Robin.

+ - #interconnect-cells: Must be one, with the argument being the MBUS
+   port ID
+
+Each device having to perform their DMA through the MBUS must have the
+interconnects and interconnect-names properties set to the MBUS
+controller and with "dma" as the interconnect name.
+
+Example:
+
+mbus: dram-controller@1c01000 {
+	compatible = "allwinner,sun5i-a13-mbus";
+	reg = <0x01c01000 0x1000>;
+	clocks = <&ccu CLK_MBUS>;
+	dma-ranges = <0x00000000 0x40000000 0x20000000>;
+	#interconnect-cells = <1>;
+};
+
+fe0: display-frontend@1e00000 {
+	compatible = "allwinner,sun5i-a13-display-frontend";
+	...
+	interconnects = <&mbus 19>;
+	interconnect-names = "dma";
+};

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux