On 12/02/2019 07:19, Jitao Shi wrote: > This patch adds mipi tx driver support for mt8183. > > Mipi_tx of mt8183 is very different to mt8173. > 1.Separate mipi tx setting to mtk_mt8173_mipi_tx.c for mt8173 > 2.Separate mipi tx setting to mtk_mt8183_mipi_tx.c for mt8183 > 3.To reuse the common code, make the common functions in mtk_mipi_tx.c > I hadn't a look on the code, but this commit message already indicates, that you should split this up in several patches. Something like this: 1. patch: carve out common functions to mtk_mipi_tx.c at this point only used by mt8173 2. patch: add support for mt8183 Regards, Matthias > Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx> > --- > drivers/gpu/drm/mediatek/Makefile | 2 + > drivers/gpu/drm/mediatek/mtk_mipi_tx.c | 352 ++---------------- > drivers/gpu/drm/mediatek/mtk_mipi_tx.h | 52 +++ > drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c | 290 +++++++++++++++ > drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 168 +++++++++ > 5 files changed, 549 insertions(+), 315 deletions(-) > create mode 100644 drivers/gpu/drm/mediatek/mtk_mipi_tx.h > create mode 100644 drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c > create mode 100644 drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c > > diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile > index 82ae49c64221..8067a4be8311 100644 > --- a/drivers/gpu/drm/mediatek/Makefile > +++ b/drivers/gpu/drm/mediatek/Makefile > @@ -12,6 +12,8 @@ mediatek-drm-y := mtk_disp_color.o \ > mtk_drm_plane.o \ > mtk_dsi.o \ > mtk_mipi_tx.o \ > + mtk_mt8173_mipi_tx.o \ > + mtk_mt8183_mipi_tx.o \ > mtk_dpi.o > > obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o > diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c > index 90e913108950..7591a38ca565 100644 > --- a/drivers/gpu/drm/mediatek/mtk_mipi_tx.c > +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.c > @@ -11,292 +11,45 @@ > * GNU General Public License for more details. > */ > > -#include <linux/clk.h> > -#include <linux/clk-provider.h> > -#include <linux/delay.h> > -#include <linux/io.h> > -#include <linux/module.h> > -#include <linux/of_device.h> > -#include <linux/platform_device.h> > -#include <linux/phy/phy.h> > - > -#define MIPITX_DSI_CON 0x00 > -#define RG_DSI_LDOCORE_EN BIT(0) > -#define RG_DSI_CKG_LDOOUT_EN BIT(1) > -#define RG_DSI_BCLK_SEL (3 << 2) > -#define RG_DSI_LD_IDX_SEL (7 << 4) > -#define RG_DSI_PHYCLK_SEL (2 << 8) > -#define RG_DSI_DSICLK_FREQ_SEL BIT(10) > -#define RG_DSI_LPTX_CLMP_EN BIT(11) > - > -#define MIPITX_DSI_CLOCK_LANE 0x04 > -#define MIPITX_DSI_DATA_LANE0 0x08 > -#define MIPITX_DSI_DATA_LANE1 0x0c > -#define MIPITX_DSI_DATA_LANE2 0x10 > -#define MIPITX_DSI_DATA_LANE3 0x14 > -#define RG_DSI_LNTx_LDOOUT_EN BIT(0) > -#define RG_DSI_LNTx_CKLANE_EN BIT(1) > -#define RG_DSI_LNTx_LPTX_IPLUS1 BIT(2) > -#define RG_DSI_LNTx_LPTX_IPLUS2 BIT(3) > -#define RG_DSI_LNTx_LPTX_IMINUS BIT(4) > -#define RG_DSI_LNTx_LPCD_IPLUS BIT(5) > -#define RG_DSI_LNTx_LPCD_IMINUS BIT(6) > -#define RG_DSI_LNTx_RT_CODE (0xf << 8) > - > -#define MIPITX_DSI_TOP_CON 0x40 > -#define RG_DSI_LNT_INTR_EN BIT(0) > -#define RG_DSI_LNT_HS_BIAS_EN BIT(1) > -#define RG_DSI_LNT_IMP_CAL_EN BIT(2) > -#define RG_DSI_LNT_TESTMODE_EN BIT(3) > -#define RG_DSI_LNT_IMP_CAL_CODE (0xf << 4) > -#define RG_DSI_LNT_AIO_SEL (7 << 8) > -#define RG_DSI_PAD_TIE_LOW_EN BIT(11) > -#define RG_DSI_DEBUG_INPUT_EN BIT(12) > -#define RG_DSI_PRESERVE (7 << 13) > - > -#define MIPITX_DSI_BG_CON 0x44 > -#define RG_DSI_BG_CORE_EN BIT(0) > -#define RG_DSI_BG_CKEN BIT(1) > -#define RG_DSI_BG_DIV (0x3 << 2) > -#define RG_DSI_BG_FAST_CHARGE BIT(4) > -#define RG_DSI_VOUT_MSK (0x3ffff << 5) > -#define RG_DSI_V12_SEL (7 << 5) > -#define RG_DSI_V10_SEL (7 << 8) > -#define RG_DSI_V072_SEL (7 << 11) > -#define RG_DSI_V04_SEL (7 << 14) > -#define RG_DSI_V032_SEL (7 << 17) > -#define RG_DSI_V02_SEL (7 << 20) > -#define RG_DSI_BG_R1_TRIM (0xf << 24) > -#define RG_DSI_BG_R2_TRIM (0xf << 28) > - > -#define MIPITX_DSI_PLL_CON0 0x50 > -#define RG_DSI_MPPLL_PLL_EN BIT(0) > -#define RG_DSI_MPPLL_DIV_MSK (0x1ff << 1) > -#define RG_DSI_MPPLL_PREDIV (3 << 1) > -#define RG_DSI_MPPLL_TXDIV0 (3 << 3) > -#define RG_DSI_MPPLL_TXDIV1 (3 << 5) > -#define RG_DSI_MPPLL_POSDIV (7 << 7) > -#define RG_DSI_MPPLL_MONVC_EN BIT(10) > -#define RG_DSI_MPPLL_MONREF_EN BIT(11) > -#define RG_DSI_MPPLL_VOD_EN BIT(12) > - > -#define MIPITX_DSI_PLL_CON1 0x54 > -#define RG_DSI_MPPLL_SDM_FRA_EN BIT(0) > -#define RG_DSI_MPPLL_SDM_SSC_PH_INIT BIT(1) > -#define RG_DSI_MPPLL_SDM_SSC_EN BIT(2) > -#define RG_DSI_MPPLL_SDM_SSC_PRD (0xffff << 16) > - > -#define MIPITX_DSI_PLL_CON2 0x58 > - > -#define MIPITX_DSI_PLL_TOP 0x64 > -#define RG_DSI_MPPLL_PRESERVE (0xff << 8) > - > -#define MIPITX_DSI_PLL_PWR 0x68 > -#define RG_DSI_MPPLL_SDM_PWR_ON BIT(0) > -#define RG_DSI_MPPLL_SDM_ISO_EN BIT(1) > -#define RG_DSI_MPPLL_SDM_PWR_ACK BIT(8) > - > -#define MIPITX_DSI_SW_CTRL 0x80 > -#define SW_CTRL_EN BIT(0) > - > -#define MIPITX_DSI_SW_CTRL_CON0 0x84 > -#define SW_LNTC_LPTX_PRE_OE BIT(0) > -#define SW_LNTC_LPTX_OE BIT(1) > -#define SW_LNTC_LPTX_P BIT(2) > -#define SW_LNTC_LPTX_N BIT(3) > -#define SW_LNTC_HSTX_PRE_OE BIT(4) > -#define SW_LNTC_HSTX_OE BIT(5) > -#define SW_LNTC_HSTX_ZEROCLK BIT(6) > -#define SW_LNT0_LPTX_PRE_OE BIT(7) > -#define SW_LNT0_LPTX_OE BIT(8) > -#define SW_LNT0_LPTX_P BIT(9) > -#define SW_LNT0_LPTX_N BIT(10) > -#define SW_LNT0_HSTX_PRE_OE BIT(11) > -#define SW_LNT0_HSTX_OE BIT(12) > -#define SW_LNT0_LPRX_EN BIT(13) > -#define SW_LNT1_LPTX_PRE_OE BIT(14) > -#define SW_LNT1_LPTX_OE BIT(15) > -#define SW_LNT1_LPTX_P BIT(16) > -#define SW_LNT1_LPTX_N BIT(17) > -#define SW_LNT1_HSTX_PRE_OE BIT(18) > -#define SW_LNT1_HSTX_OE BIT(19) > -#define SW_LNT2_LPTX_PRE_OE BIT(20) > -#define SW_LNT2_LPTX_OE BIT(21) > -#define SW_LNT2_LPTX_P BIT(22) > -#define SW_LNT2_LPTX_N BIT(23) > -#define SW_LNT2_HSTX_PRE_OE BIT(24) > -#define SW_LNT2_HSTX_OE BIT(25) > - > -struct mtk_mipitx_data { > - const u32 mppll_preserve; > -}; > - > -struct mtk_mipi_tx { > - struct device *dev; > - void __iomem *regs; > - u32 data_rate; > - const struct mtk_mipitx_data *driver_data; > - struct clk_hw pll_hw; > - struct clk *pll; > -}; > +#include "mtk_mipi_tx.h" > > -static inline struct mtk_mipi_tx *mtk_mipi_tx_from_clk_hw(struct clk_hw *hw) > +inline struct mtk_mipi_tx *mtk_mipi_tx_from_clk_hw(struct clk_hw *hw) > { > return container_of(hw, struct mtk_mipi_tx, pll_hw); > } > > -static void mtk_mipi_tx_clear_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, > - u32 bits) > +void mtk_mipi_tx_clear_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, > + u32 bits) > { > u32 temp = readl(mipi_tx->regs + offset); > > writel(temp & ~bits, mipi_tx->regs + offset); > } > > -static void mtk_mipi_tx_set_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, > - u32 bits) > +void mtk_mipi_tx_set_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, > + u32 bits) > { > u32 temp = readl(mipi_tx->regs + offset); > > writel(temp | bits, mipi_tx->regs + offset); > } > > -static void mtk_mipi_tx_update_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, > - u32 mask, u32 data) > +void mtk_mipi_tx_update_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, > + u32 mask, u32 data) > { > u32 temp = readl(mipi_tx->regs + offset); > > writel((temp & ~mask) | (data & mask), mipi_tx->regs + offset); > } > > -static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw) > -{ > - struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); > - u8 txdiv, txdiv0, txdiv1; > - u64 pcw; > - > - dev_dbg(mipi_tx->dev, "prepare: %u Hz\n", mipi_tx->data_rate); > - > - if (mipi_tx->data_rate >= 500000000) { > - txdiv = 1; > - txdiv0 = 0; > - txdiv1 = 0; > - } else if (mipi_tx->data_rate >= 250000000) { > - txdiv = 2; > - txdiv0 = 1; > - txdiv1 = 0; > - } else if (mipi_tx->data_rate >= 125000000) { > - txdiv = 4; > - txdiv0 = 2; > - txdiv1 = 0; > - } else if (mipi_tx->data_rate > 62000000) { > - txdiv = 8; > - txdiv0 = 2; > - txdiv1 = 1; > - } else if (mipi_tx->data_rate >= 50000000) { > - txdiv = 16; > - txdiv0 = 2; > - txdiv1 = 2; > - } else { > - return -EINVAL; > - } > - > - mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_BG_CON, > - RG_DSI_VOUT_MSK | > - RG_DSI_BG_CKEN | RG_DSI_BG_CORE_EN, > - (4 << 20) | (4 << 17) | (4 << 14) | > - (4 << 11) | (4 << 8) | (4 << 5) | > - RG_DSI_BG_CKEN | RG_DSI_BG_CORE_EN); > - > - usleep_range(30, 100); > - > - mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_TOP_CON, > - RG_DSI_LNT_IMP_CAL_CODE | RG_DSI_LNT_HS_BIAS_EN, > - (8 << 4) | RG_DSI_LNT_HS_BIAS_EN); > - > - mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_CON, > - RG_DSI_CKG_LDOOUT_EN | RG_DSI_LDOCORE_EN); > - > - mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_PWR, > - RG_DSI_MPPLL_SDM_PWR_ON | > - RG_DSI_MPPLL_SDM_ISO_EN, > - RG_DSI_MPPLL_SDM_PWR_ON); > - > - mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON0, > - RG_DSI_MPPLL_PLL_EN); > - > - mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_CON0, > - RG_DSI_MPPLL_TXDIV0 | RG_DSI_MPPLL_TXDIV1 | > - RG_DSI_MPPLL_PREDIV, > - (txdiv0 << 3) | (txdiv1 << 5)); > - > - /* > - * PLL PCW config > - * PCW bit 24~30 = integer part of pcw > - * PCW bit 0~23 = fractional part of pcw > - * pcw = data_Rate*4*txdiv/(Ref_clk*2); > - * Post DIV =4, so need data_Rate*4 > - * Ref_clk is 26MHz > - */ > - pcw = div_u64(((u64)mipi_tx->data_rate * 2 * txdiv) << 24, > - 26000000); > - writel(pcw, mipi_tx->regs + MIPITX_DSI_PLL_CON2); > - > - mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_PLL_CON1, > - RG_DSI_MPPLL_SDM_FRA_EN); > - > - mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_PLL_CON0, RG_DSI_MPPLL_PLL_EN); > - > - usleep_range(20, 100); > - > - mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON1, > - RG_DSI_MPPLL_SDM_SSC_EN); > - > - mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_TOP, > - RG_DSI_MPPLL_PRESERVE, > - mipi_tx->driver_data->mppll_preserve); > - > - return 0; > -} > - > -static void mtk_mipi_tx_pll_unprepare(struct clk_hw *hw) > -{ > - struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); > - > - dev_dbg(mipi_tx->dev, "unprepare\n"); > - > - mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON0, > - RG_DSI_MPPLL_PLL_EN); > - > - mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_TOP, > - RG_DSI_MPPLL_PRESERVE, 0); > - > - mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_PWR, > - RG_DSI_MPPLL_SDM_ISO_EN | > - RG_DSI_MPPLL_SDM_PWR_ON, > - RG_DSI_MPPLL_SDM_ISO_EN); > - > - mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_TOP_CON, > - RG_DSI_LNT_HS_BIAS_EN); > - > - mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_CON, > - RG_DSI_CKG_LDOOUT_EN | RG_DSI_LDOCORE_EN); > - > - mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_BG_CON, > - RG_DSI_BG_CKEN | RG_DSI_BG_CORE_EN); > - > - mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON0, > - RG_DSI_MPPLL_DIV_MSK); > -} > - > -static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate, > - unsigned long *prate) > +long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long *prate) > { > return clamp_val(rate, 50000000, 1250000000); > } > > -static int mtk_mipi_tx_pll_set_rate(struct clk_hw *hw, unsigned long rate, > - unsigned long parent_rate) > +int mtk_mipi_tx_pll_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate) > { > struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); > > @@ -307,37 +60,14 @@ static int mtk_mipi_tx_pll_set_rate(struct clk_hw *hw, unsigned long rate, > return 0; > } > > -static unsigned long mtk_mipi_tx_pll_recalc_rate(struct clk_hw *hw, > - unsigned long parent_rate) > +unsigned long mtk_mipi_tx_pll_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > { > struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); > > return mipi_tx->data_rate; > } > > -static const struct clk_ops mtk_mipi_tx_pll_ops = { > - .prepare = mtk_mipi_tx_pll_prepare, > - .unprepare = mtk_mipi_tx_pll_unprepare, > - .round_rate = mtk_mipi_tx_pll_round_rate, > - .set_rate = mtk_mipi_tx_pll_set_rate, > - .recalc_rate = mtk_mipi_tx_pll_recalc_rate, > -}; > - > -static int mtk_mipi_tx_power_on_signal(struct phy *phy) > -{ > - struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); > - u32 reg; > - > - for (reg = MIPITX_DSI_CLOCK_LANE; > - reg <= MIPITX_DSI_DATA_LANE3; reg += 4) > - mtk_mipi_tx_set_bits(mipi_tx, reg, RG_DSI_LNTx_LDOOUT_EN); > - > - mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_TOP_CON, > - RG_DSI_PAD_TIE_LOW_EN); > - > - return 0; > -} > - > static int mtk_mipi_tx_power_on(struct phy *phy) > { > struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); > @@ -349,30 +79,16 @@ static int mtk_mipi_tx_power_on(struct phy *phy) > return ret; > > /* Enable DSI Lane LDO outputs, disable pad tie low */ > - mtk_mipi_tx_power_on_signal(phy); > - > + mipi_tx->driver_data->mipi_tx_enable_signal(phy); > return 0; > } > > -static void mtk_mipi_tx_power_off_signal(struct phy *phy) > -{ > - struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); > - u32 reg; > - > - mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_TOP_CON, > - RG_DSI_PAD_TIE_LOW_EN); > - > - for (reg = MIPITX_DSI_CLOCK_LANE; > - reg <= MIPITX_DSI_DATA_LANE3; reg += 4) > - mtk_mipi_tx_clear_bits(mipi_tx, reg, RG_DSI_LNTx_LDOOUT_EN); > -} > - > static int mtk_mipi_tx_power_off(struct phy *phy) > { > struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); > > /* Enable pad tie low, disable DSI Lane LDO outputs */ > - mtk_mipi_tx_power_off_signal(phy); > + mipi_tx->driver_data->mipi_tx_disable_signal(phy); > > /* Disable PLL and power down core */ > clk_disable_unprepare(mipi_tx->pll); > @@ -386,15 +102,23 @@ static const struct phy_ops mtk_mipi_tx_ops = { > .owner = THIS_MODULE, > }; > > +static void mtk_mipi_tx_clk_get_ops(struct mtk_mipi_tx *mipi_tx, > + const struct clk_ops **ops) > +{ > + if (mipi_tx && mipi_tx->driver_data && > + mipi_tx->driver_data->mipi_tx_clk_ops) > + *ops = mipi_tx->driver_data->mipi_tx_clk_ops; > + else > + dev_err(mipi_tx->dev, "Failed to get clk ops of phy\n"); > +} > + > static int mtk_mipi_tx_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > struct mtk_mipi_tx *mipi_tx; > struct resource *mem; > - struct clk *ref_clk; > const char *ref_clk_name; > struct clk_init_data clk_init = { > - .ops = &mtk_mipi_tx_pll_ops, > .num_parents = 1, > .parent_names = (const char * const *)&ref_clk_name, > .flags = CLK_SET_RATE_GATE, > @@ -408,6 +132,7 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev) > return -ENOMEM; > > mipi_tx->driver_data = of_device_get_match_data(dev); > + > mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); > mipi_tx->regs = devm_ioremap_resource(dev, mem); > if (IS_ERR(mipi_tx->regs)) { > @@ -416,13 +141,14 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev) > return ret; > } > > - ref_clk = devm_clk_get(dev, NULL); > - if (IS_ERR(ref_clk)) { > - ret = PTR_ERR(ref_clk); > + mipi_tx->ref_clk = devm_clk_get(dev, "ref_clk"); > + if (IS_ERR(mipi_tx->ref_clk)) { > + ret = PTR_ERR(mipi_tx->ref_clk); > dev_err(dev, "Failed to get reference clock: %d\n", ret); > return ret; > } > - ref_clk_name = __clk_get_name(ref_clk); > + > + ref_clk_name = __clk_get_name(mipi_tx->ref_clk); > > ret = of_property_read_string(dev->of_node, "clock-output-names", > &clk_init.name); > @@ -431,6 +157,8 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev) > return ret; > } > > + mtk_mipi_tx_clk_get_ops(mipi_tx, &clk_init.ops); > + > mipi_tx->pll_hw.init = &clk_init; > mipi_tx->pll = devm_clk_register(dev, &mipi_tx->pll_hw); > if (IS_ERR(mipi_tx->pll)) { > @@ -465,20 +193,14 @@ static int mtk_mipi_tx_remove(struct platform_device *pdev) > return 0; > } > > -static const struct mtk_mipitx_data mt2701_mipitx_data = { > - .mppll_preserve = (3 << 8) > -}; > - > -static const struct mtk_mipitx_data mt8173_mipitx_data = { > - .mppll_preserve = (0 << 8) > -}; > - > static const struct of_device_id mtk_mipi_tx_match[] = { > { .compatible = "mediatek,mt2701-mipi-tx", > .data = &mt2701_mipitx_data }, > { .compatible = "mediatek,mt8173-mipi-tx", > .data = &mt8173_mipitx_data }, > - {}, > + { .compatible = "mediatek,mt8183-mipi-tx", > + .data = &mt8183_mipitx_data }, > + { }, > }; > > struct platform_driver mtk_mipi_tx_driver = { > diff --git a/drivers/gpu/drm/mediatek/mtk_mipi_tx.h b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h > new file mode 100644 > index 000000000000..af83023e81cf > --- /dev/null > +++ b/drivers/gpu/drm/mediatek/mtk_mipi_tx.h > @@ -0,0 +1,52 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (c) 2019 MediaTek Inc. > + * Author: Jitao Shi <jitao.shi@xxxxxxxxxxxx> > + */ > + > +#ifndef _MTK_MIPI_TX_H > +#define _MTK_MIPI_TX_H > + > +#include <linux/clk.h> > +#include <linux/clk-provider.h> > +#include <linux/delay.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/phy/phy.h> > + > +struct mtk_mipitx_data { > + const u32 mppll_preserve; > + const struct clk_ops *mipi_tx_clk_ops; > + void (*mipi_tx_enable_signal)(struct phy *phy); > + void (*mipi_tx_disable_signal)(struct phy *phy); > +}; > + > +struct mtk_mipi_tx { > + struct device *dev; > + void __iomem *regs; > + u32 data_rate; > + struct clk *ref_clk; > + const struct mtk_mipitx_data *driver_data; > + struct clk_hw pll_hw; > + struct clk *pll; > +}; > + > +struct mtk_mipi_tx *mtk_mipi_tx_from_clk_hw(struct clk_hw *hw); > +void mtk_mipi_tx_clear_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, u32 bits); > +void mtk_mipi_tx_set_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, u32 bits); > +void mtk_mipi_tx_update_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, u32 mask, > + u32 data); > +long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long *prate); > +int mtk_mipi_tx_pll_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate); > +unsigned long mtk_mipi_tx_pll_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate); > + > +extern const struct mtk_mipitx_data mt2701_mipitx_data; > +extern const struct mtk_mipitx_data mt8173_mipitx_data; > +extern const struct mtk_mipitx_data mt8183_mipitx_data; > + > +#endif > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c > new file mode 100644 > index 000000000000..8e57cdf85b06 > --- /dev/null > +++ b/drivers/gpu/drm/mediatek/mtk_mt8173_mipi_tx.c > @@ -0,0 +1,290 @@ > +/* > + * Copyright (c) 2015 MediaTek Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include "mtk_mipi_tx.h" > + > +#define MIPITX_DSI_CON 0x00 > +#define RG_DSI_LDOCORE_EN BIT(0) > +#define RG_DSI_CKG_LDOOUT_EN BIT(1) > +#define RG_DSI_BCLK_SEL (3 << 2) > +#define RG_DSI_LD_IDX_SEL (7 << 4) > +#define RG_DSI_PHYCLK_SEL (2 << 8) > +#define RG_DSI_DSICLK_FREQ_SEL BIT(10) > +#define RG_DSI_LPTX_CLMP_EN BIT(11) > + > +#define MIPITX_DSI_CLOCK_LANE 0x04 > +#define MIPITX_DSI_DATA_LANE0 0x08 > +#define MIPITX_DSI_DATA_LANE1 0x0c > +#define MIPITX_DSI_DATA_LANE2 0x10 > +#define MIPITX_DSI_DATA_LANE3 0x14 > +#define RG_DSI_LNTx_LDOOUT_EN BIT(0) > +#define RG_DSI_LNTx_CKLANE_EN BIT(1) > +#define RG_DSI_LNTx_LPTX_IPLUS1 BIT(2) > +#define RG_DSI_LNTx_LPTX_IPLUS2 BIT(3) > +#define RG_DSI_LNTx_LPTX_IMINUS BIT(4) > +#define RG_DSI_LNTx_LPCD_IPLUS BIT(5) > +#define RG_DSI_LNTx_LPCD_IMINUS BIT(6) > +#define RG_DSI_LNTx_RT_CODE (0xf << 8) > + > +#define MIPITX_DSI_TOP_CON 0x40 > +#define RG_DSI_LNT_INTR_EN BIT(0) > +#define RG_DSI_LNT_HS_BIAS_EN BIT(1) > +#define RG_DSI_LNT_IMP_CAL_EN BIT(2) > +#define RG_DSI_LNT_TESTMODE_EN BIT(3) > +#define RG_DSI_LNT_IMP_CAL_CODE (0xf << 4) > +#define RG_DSI_LNT_AIO_SEL (7 << 8) > +#define RG_DSI_PAD_TIE_LOW_EN BIT(11) > +#define RG_DSI_DEBUG_INPUT_EN BIT(12) > +#define RG_DSI_PRESERVE (7 << 13) > + > +#define MIPITX_DSI_BG_CON 0x44 > +#define RG_DSI_BG_CORE_EN BIT(0) > +#define RG_DSI_BG_CKEN BIT(1) > +#define RG_DSI_BG_DIV (0x3 << 2) > +#define RG_DSI_BG_FAST_CHARGE BIT(4) > +#define RG_DSI_VOUT_MSK (0x3ffff << 5) > +#define RG_DSI_V12_SEL (7 << 5) > +#define RG_DSI_V10_SEL (7 << 8) > +#define RG_DSI_V072_SEL (7 << 11) > +#define RG_DSI_V04_SEL (7 << 14) > +#define RG_DSI_V032_SEL (7 << 17) > +#define RG_DSI_V02_SEL (7 << 20) > +#define RG_DSI_BG_R1_TRIM (0xf << 24) > +#define RG_DSI_BG_R2_TRIM (0xf << 28) > + > +#define MIPITX_DSI_PLL_CON0 0x50 > +#define RG_DSI_MPPLL_PLL_EN BIT(0) > +#define RG_DSI_MPPLL_DIV_MSK (0x1ff << 1) > +#define RG_DSI_MPPLL_PREDIV (3 << 1) > +#define RG_DSI_MPPLL_TXDIV0 (3 << 3) > +#define RG_DSI_MPPLL_TXDIV1 (3 << 5) > +#define RG_DSI_MPPLL_POSDIV (7 << 7) > +#define RG_DSI_MPPLL_MONVC_EN BIT(10) > +#define RG_DSI_MPPLL_MONREF_EN BIT(11) > +#define RG_DSI_MPPLL_VOD_EN BIT(12) > + > +#define MIPITX_DSI_PLL_CON1 0x54 > +#define RG_DSI_MPPLL_SDM_FRA_EN BIT(0) > +#define RG_DSI_MPPLL_SDM_SSC_PH_INIT BIT(1) > +#define RG_DSI_MPPLL_SDM_SSC_EN BIT(2) > +#define RG_DSI_MPPLL_SDM_SSC_PRD (0xffff << 16) > + > +#define MIPITX_DSI_PLL_CON2 0x58 > + > +#define MIPITX_DSI_PLL_TOP 0x64 > +#define RG_DSI_MPPLL_PRESERVE (0xff << 8) > + > +#define MIPITX_DSI_PLL_PWR 0x68 > +#define RG_DSI_MPPLL_SDM_PWR_ON BIT(0) > +#define RG_DSI_MPPLL_SDM_ISO_EN BIT(1) > +#define RG_DSI_MPPLL_SDM_PWR_ACK BIT(8) > + > +#define MIPITX_DSI_SW_CTRL 0x80 > +#define SW_CTRL_EN BIT(0) > + > +#define MIPITX_DSI_SW_CTRL_CON0 0x84 > +#define SW_LNTC_LPTX_PRE_OE BIT(0) > +#define SW_LNTC_LPTX_OE BIT(1) > +#define SW_LNTC_LPTX_P BIT(2) > +#define SW_LNTC_LPTX_N BIT(3) > +#define SW_LNTC_HSTX_PRE_OE BIT(4) > +#define SW_LNTC_HSTX_OE BIT(5) > +#define SW_LNTC_HSTX_ZEROCLK BIT(6) > +#define SW_LNT0_LPTX_PRE_OE BIT(7) > +#define SW_LNT0_LPTX_OE BIT(8) > +#define SW_LNT0_LPTX_P BIT(9) > +#define SW_LNT0_LPTX_N BIT(10) > +#define SW_LNT0_HSTX_PRE_OE BIT(11) > +#define SW_LNT0_HSTX_OE BIT(12) > +#define SW_LNT0_LPRX_EN BIT(13) > +#define SW_LNT1_LPTX_PRE_OE BIT(14) > +#define SW_LNT1_LPTX_OE BIT(15) > +#define SW_LNT1_LPTX_P BIT(16) > +#define SW_LNT1_LPTX_N BIT(17) > +#define SW_LNT1_HSTX_PRE_OE BIT(18) > +#define SW_LNT1_HSTX_OE BIT(19) > +#define SW_LNT2_LPTX_PRE_OE BIT(20) > +#define SW_LNT2_LPTX_OE BIT(21) > +#define SW_LNT2_LPTX_P BIT(22) > +#define SW_LNT2_LPTX_N BIT(23) > +#define SW_LNT2_HSTX_PRE_OE BIT(24) > +#define SW_LNT2_HSTX_OE BIT(25) > + > +static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw) > +{ > + struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); > + u8 txdiv, txdiv0, txdiv1; > + u64 pcw; > + > + dev_dbg(mipi_tx->dev, "prepare: %u Hz\n", mipi_tx->data_rate); > + > + if (mipi_tx->data_rate >= 500000000) { > + txdiv = 1; > + txdiv0 = 0; > + txdiv1 = 0; > + } else if (mipi_tx->data_rate >= 250000000) { > + txdiv = 2; > + txdiv0 = 1; > + txdiv1 = 0; > + } else if (mipi_tx->data_rate >= 125000000) { > + txdiv = 4; > + txdiv0 = 2; > + txdiv1 = 0; > + } else if (mipi_tx->data_rate > 62000000) { > + txdiv = 8; > + txdiv0 = 2; > + txdiv1 = 1; > + } else if (mipi_tx->data_rate >= 50000000) { > + txdiv = 16; > + txdiv0 = 2; > + txdiv1 = 2; > + } else { > + return -EINVAL; > + } > + > + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_BG_CON, > + RG_DSI_VOUT_MSK | > + RG_DSI_BG_CKEN | RG_DSI_BG_CORE_EN, > + (4 << 20) | (4 << 17) | (4 << 14) | > + (4 << 11) | (4 << 8) | (4 << 5) | > + RG_DSI_BG_CKEN | RG_DSI_BG_CORE_EN); > + > + usleep_range(30, 100); > + > + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_TOP_CON, > + RG_DSI_LNT_IMP_CAL_CODE | RG_DSI_LNT_HS_BIAS_EN, > + (8 << 4) | RG_DSI_LNT_HS_BIAS_EN); > + > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_CON, > + RG_DSI_CKG_LDOOUT_EN | RG_DSI_LDOCORE_EN); > + > + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_PWR, > + RG_DSI_MPPLL_SDM_PWR_ON | > + RG_DSI_MPPLL_SDM_ISO_EN, > + RG_DSI_MPPLL_SDM_PWR_ON); > + > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON0, > + RG_DSI_MPPLL_PLL_EN); > + > + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_CON0, > + RG_DSI_MPPLL_TXDIV0 | RG_DSI_MPPLL_TXDIV1 | > + RG_DSI_MPPLL_PREDIV, > + (txdiv0 << 3) | (txdiv1 << 5)); > + > + /* > + * PLL PCW config > + * PCW bit 24~30 = integer part of pcw > + * PCW bit 0~23 = fractional part of pcw > + * pcw = data_Rate*4*txdiv/(Ref_clk*2); > + * Post DIV =4, so need data_Rate*4 > + * Ref_clk is 26MHz > + */ > + pcw = div_u64(((u64)mipi_tx->data_rate * 2 * txdiv) << 24, > + 26000000); > + writel(pcw, mipi_tx->regs + MIPITX_DSI_PLL_CON2); > + > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_PLL_CON1, > + RG_DSI_MPPLL_SDM_FRA_EN); > + > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_PLL_CON0, RG_DSI_MPPLL_PLL_EN); > + > + usleep_range(20, 100); > + > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON1, > + RG_DSI_MPPLL_SDM_SSC_EN); > + > + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_TOP, > + RG_DSI_MPPLL_PRESERVE, > + mipi_tx->driver_data->mppll_preserve); > + > + return 0; > +} > + > +static void mtk_mipi_tx_pll_unprepare(struct clk_hw *hw) > +{ > + struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); > + > + dev_dbg(mipi_tx->dev, "unprepare\n"); > + > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON0, > + RG_DSI_MPPLL_PLL_EN); > + > + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_TOP, > + RG_DSI_MPPLL_PRESERVE, 0); > + > + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_PWR, > + RG_DSI_MPPLL_SDM_ISO_EN | > + RG_DSI_MPPLL_SDM_PWR_ON, > + RG_DSI_MPPLL_SDM_ISO_EN); > + > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_TOP_CON, > + RG_DSI_LNT_HS_BIAS_EN); > + > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_CON, > + RG_DSI_CKG_LDOOUT_EN | RG_DSI_LDOCORE_EN); > + > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_BG_CON, > + RG_DSI_BG_CKEN | RG_DSI_BG_CORE_EN); > + > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON0, > + RG_DSI_MPPLL_DIV_MSK); > +} > + > +static const struct clk_ops mtk_mipi_tx_pll_ops = { > + .prepare = mtk_mipi_tx_pll_prepare, > + .unprepare = mtk_mipi_tx_pll_unprepare, > + .round_rate = mtk_mipi_tx_pll_round_rate, > + .set_rate = mtk_mipi_tx_pll_set_rate, > + .recalc_rate = mtk_mipi_tx_pll_recalc_rate, > +}; > + > +static void mtk_mipi_tx_power_on_signal(struct phy *phy) > +{ > + struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); > + u32 reg; > + > + for (reg = MIPITX_DSI_CLOCK_LANE; > + reg <= MIPITX_DSI_DATA_LANE3; reg += 4) > + mtk_mipi_tx_set_bits(mipi_tx, reg, RG_DSI_LNTx_LDOOUT_EN); > + > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_TOP_CON, > + RG_DSI_PAD_TIE_LOW_EN); > +} > + > +static void mtk_mipi_tx_power_off_signal(struct phy *phy) > +{ > + struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); > + u32 reg; > + > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_TOP_CON, > + RG_DSI_PAD_TIE_LOW_EN); > + > + for (reg = MIPITX_DSI_CLOCK_LANE; > + reg <= MIPITX_DSI_DATA_LANE3; reg += 4) > + mtk_mipi_tx_clear_bits(mipi_tx, reg, RG_DSI_LNTx_LDOOUT_EN); > +} > + > +const struct mtk_mipitx_data mt2701_mipitx_data = { > + .mppll_preserve = (3 << 8), > + .mipi_tx_clk_ops = &mtk_mipi_tx_pll_ops, > + .mipi_tx_enable_signal = mtk_mipi_tx_power_on_signal, > + .mipi_tx_disable_signal = mtk_mipi_tx_power_off_signal, > +}; > + > +const struct mtk_mipitx_data mt8173_mipitx_data = { > + .mppll_preserve = (0 << 8), > + .mipi_tx_clk_ops = &mtk_mipi_tx_pll_ops, > + .mipi_tx_enable_signal = mtk_mipi_tx_power_on_signal, > + .mipi_tx_disable_signal = mtk_mipi_tx_power_off_signal, > +}; > + > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c > new file mode 100644 > index 000000000000..07f70a3cad13 > --- /dev/null > +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c > @@ -0,0 +1,168 @@ > +/* > + * Copyright (c) 2015 MediaTek Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include "mtk_mipi_tx.h" > + > +#define MIPITX_LANE_CON 0x000c > +#define RG_DSI_CPHY_T1DRV_EN BIT(0) > +#define RG_DSI_ANA_CK_SEL BIT(1) > +#define RG_DSI_PHY_CK_SEL BIT(2) > +#define RG_DSI_CPHY_EN BIT(3) > +#define RG_DSI_PHYCK_INV_EN BIT(4) > +#define RG_DSI_PWR04_EN BIT(5) > +#define RG_DSI_BG_LPF_EN BIT(6) > +#define RG_DSI_BG_CORE_EN BIT(7) > +#define RG_DSI_PAD_TIEL_SEL BIT(8) > + > +#define MIPITX_PLL_PWR 0x0028 > +#define MIPITX_PLL_CON0 0x002c > +#define MIPITX_PLL_CON1 0x0030 > +#define MIPITX_PLL_CON2 0x0034 > +#define MIPITX_PLL_CON3 0x0038 > +#define MIPITX_PLL_CON4 0x003c > +#define RG_DSI_PLL_IBIAS (3 << 10) > + > +#define MIPITX_D2_SW_CTL_EN 0x0144 > +#define MIPITX_D0_SW_CTL_EN 0x0244 > +#define MIPITX_CK_CKMODE_EN 0x0328 > +#define DSI_CK_CKMODE_EN BIT(0) > +#define MIPITX_CK_SW_CTL_EN 0x0344 > +#define MIPITX_D1_SW_CTL_EN 0x0444 > +#define MIPITX_D3_SW_CTL_EN 0x0544 > +#define DSI_SW_CTL_EN BIT(0) > +#define AD_DSI_PLL_SDM_PWR_ON BIT(0) > +#define AD_DSI_PLL_SDM_ISO_EN BIT(1) > + > +#define RG_DSI_PLL_EN BIT(4) > +#define RG_DSI_PLL_POSDIV (0x7 << 8) > + > +static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw) > +{ > + struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); > + unsigned int txdiv, txdiv0, txdiv1; > + u64 pcw; > + int ret; > + > + dev_dbg(mipi_tx->dev, "prepare: %u bps\n", mipi_tx->data_rate); > + > + if (mipi_tx->data_rate >= 2000000000) { > + txdiv = 1; > + txdiv0 = 0; > + txdiv1 = 0; > + } else if (mipi_tx->data_rate >= 1000000000) { > + txdiv = 2; > + txdiv0 = 1; > + txdiv1 = 0; > + } else if (mipi_tx->data_rate >= 500000000) { > + txdiv = 4; > + txdiv0 = 2; > + txdiv1 = 0; > + } else if (mipi_tx->data_rate > 250000000) { > + txdiv = 8; > + txdiv0 = 3; > + txdiv1 = 0; > + } else if (mipi_tx->data_rate >= 125000000) { > + txdiv = 16; > + txdiv0 = 4; > + txdiv1 = 0; > + } else { > + return -EINVAL; > + } > + > + ret = clk_prepare_enable(mipi_tx->ref_clk); > + if (ret < 0) { > + dev_err(mipi_tx->dev, "can't mipi_tx ref_clk %d\n", ret); > + return ret; > + } > + > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_CON4, RG_DSI_PLL_IBIAS); > + > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_PWR_ON); > + usleep_range(30, 100); > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_ISO_EN); > + pcw = div_u64(((u64)mipi_tx->data_rate * txdiv) << 24, 26000000); > + writel(pcw, mipi_tx->regs + MIPITX_PLL_CON0); > + mtk_mipi_tx_update_bits(mipi_tx, MIPITX_PLL_CON1, RG_DSI_PLL_POSDIV, > + txdiv0 << 8); > + usleep_range(1000, 2000); > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_PLL_CON1, RG_DSI_PLL_EN); > + > + return 0; > +} > + > +static void mtk_mipi_tx_pll_unprepare(struct clk_hw *hw) > +{ > + struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw); > + > + dev_dbg(mipi_tx->dev, "unprepare\n"); > + > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_CON1, RG_DSI_PLL_EN); > + /* step 1: SDM_RWR_ON / SDM_ISO_EN */ > + > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_ISO_EN); > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_PLL_PWR, AD_DSI_PLL_SDM_PWR_ON); > + clk_disable_unprepare(mipi_tx->ref_clk); > +} > + > +static const struct clk_ops mtk_mipi_tx_pll_ops = { > + .prepare = mtk_mipi_tx_pll_prepare, > + .unprepare = mtk_mipi_tx_pll_unprepare, > + .round_rate = mtk_mipi_tx_pll_round_rate, > + .set_rate = mtk_mipi_tx_pll_set_rate, > + .recalc_rate = mtk_mipi_tx_pll_recalc_rate, > +}; > + > +static void mtk_mipi_tx_power_on_signal(struct phy *phy) > +{ > + struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); > + > + /* BG_LPF_EN / BG_CORE_EN */ > + writel(RG_DSI_PAD_TIEL_SEL | RG_DSI_BG_CORE_EN, > + mipi_tx->regs + MIPITX_LANE_CON); > + usleep_range(30, 100); > + writel(RG_DSI_BG_CORE_EN | RG_DSI_BG_LPF_EN, > + mipi_tx->regs + MIPITX_LANE_CON); > + > + /* Switch OFF each Lane */ > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D0_SW_CTL_EN, DSI_SW_CTL_EN); > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D1_SW_CTL_EN, DSI_SW_CTL_EN); > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D2_SW_CTL_EN, DSI_SW_CTL_EN); > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN); > + mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN); > + > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN); > +} > + > +static void mtk_mipi_tx_power_off_signal(struct phy *phy) > +{ > + struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy); > + > + /* Switch ON each Lane */ > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D0_SW_CTL_EN, DSI_SW_CTL_EN); > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D1_SW_CTL_EN, DSI_SW_CTL_EN); > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D2_SW_CTL_EN, DSI_SW_CTL_EN); > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_D3_SW_CTL_EN, DSI_SW_CTL_EN); > + mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_SW_CTL_EN, DSI_SW_CTL_EN); > + > + /* step 2 */ > + writel(RG_DSI_PAD_TIEL_SEL | RG_DSI_BG_CORE_EN, > + mipi_tx->regs + MIPITX_LANE_CON); > + writel(RG_DSI_PAD_TIEL_SEL, mipi_tx->regs + MIPITX_LANE_CON); > +} > + > +const struct mtk_mipitx_data mt8183_mipitx_data = { > + .mipi_tx_clk_ops = &mtk_mipi_tx_pll_ops, > + .mipi_tx_enable_signal = mtk_mipi_tx_power_on_signal, > + .mipi_tx_disable_signal = mtk_mipi_tx_power_off_signal, > +}; > + > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel