On Tue, 2019-02-12 at 08:46 +0100, Daniel Vetter wrote: > On Tue, Feb 12, 2019 at 10:36:23AM +0800, Hean-Loong, Ong via dri- > devel wrote: > > From: Ong, Hean Loong <hean.loong.ong@xxxxxxxxx> > > > > Driver for Intel FPGA Video and Image Processing Suite Frame Buffer > > II. > > The driver only supports the Intel Arria10 devkit and its variants. > > This driver can be either loaded staticlly or in modules. > > The OF device tree binding is located at: > > Documentation/devicetree/bindings/display/altr,vip-fb2.txt > > > > Signed-off-by: Ong, Hean Loong <hean.loong.ong@xxxxxxxxx> > > It looks like your cover letter and patch 2 didn't make it to the > list > somehow. Please check those aren't stuck on your side (list admins > didn't > see them yet). > That's weird my git send-email says everything was okay > > --- > > drivers/gpu/drm/Kconfig | 2 + > > drivers/gpu/drm/Makefile | 1 + > > drivers/gpu/drm/ivip/Kconfig | 14 ++ > > drivers/gpu/drm/ivip/Makefile | 6 + > > drivers/gpu/drm/ivip/intel_vip_conn.c | 91 +++++++++ > > drivers/gpu/drm/ivip/intel_vip_drv.c | 332 > > +++++++++++++++++++++++++++++++++ > > drivers/gpu/drm/ivip/intel_vip_drv.h | 73 +++++++ > > 7 files changed, 519 insertions(+), 0 deletions(-) > > create mode 100644 drivers/gpu/drm/ivip/Kconfig > > create mode 100644 drivers/gpu/drm/ivip/Makefile > > create mode 100644 drivers/gpu/drm/ivip/intel_vip_conn.c > > create mode 100644 drivers/gpu/drm/ivip/intel_vip_drv.c > > create mode 100644 drivers/gpu/drm/ivip/intel_vip_drv.h > > > > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig > > index 4385f00..0251a9f 100644 > > --- a/drivers/gpu/drm/Kconfig > > +++ b/drivers/gpu/drm/Kconfig > > @@ -235,6 +235,8 @@ source "drivers/gpu/drm/nouveau/Kconfig" > > > > source "drivers/gpu/drm/i915/Kconfig" > > > > +source "drivers/gpu/drm/ivip/Kconfig" > > + > > config DRM_VGEM > > tristate "Virtual GEM provider" > > depends on DRM > > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile > > index ce8d1d3..85a5694 100644 > > --- a/drivers/gpu/drm/Makefile > > +++ b/drivers/gpu/drm/Makefile > > @@ -63,6 +63,7 @@ obj-$(CONFIG_DRM_AMDGPU)+= amd/amdgpu/ > > obj-$(CONFIG_DRM_MGA) += mga/ > > obj-$(CONFIG_DRM_I810) += i810/ > > obj-$(CONFIG_DRM_I915) += i915/ > > +obj-$(CONFIG_DRM_IVIP) += ivip/ > > obj-$(CONFIG_DRM_MGAG200) += mgag200/ > > obj-$(CONFIG_DRM_V3D) += v3d/ > > obj-$(CONFIG_DRM_VC4) += vc4/ > > diff --git a/drivers/gpu/drm/ivip/Kconfig > > b/drivers/gpu/drm/ivip/Kconfig > > new file mode 100644 > > index 0000000..1d08b90 > > --- /dev/null > > +++ b/drivers/gpu/drm/ivip/Kconfig > > @@ -0,0 +1,14 @@ > > +config DRM_IVIP > > + tristate "Intel FGPA Video and Image Processing" > > + depends on DRM && OF > > + select DRM_GEM_CMA_HELPER > > + select DRM_KMS_HELPER > > + select DRM_KMS_FB_HELPER > > + select DRM_KMS_CMA_HELPER > > + help > > + Choose this option if you have an Intel FPGA > > Arria 10 system > > + and above with an Intel Display Port IP. This > > does not support > > + legacy Intel FPGA Cyclone V display port. > > Currently only single > > + frame buffer is supported. Note that ACPI and > > X_86 architecture > > + is not supported for Arria10. If M is selected > > the module will be > > + called ivip. > > diff --git a/drivers/gpu/drm/ivip/Makefile > > b/drivers/gpu/drm/ivip/Makefile > > new file mode 100644 > > index 0000000..8c54e11 > > --- /dev/null > > +++ b/drivers/gpu/drm/ivip/Makefile > > @@ -0,0 +1,6 @@ > > +# > > +# Makefile for the drm device driver. This driver provides > > support for the > > +# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and > > higher. > > + > > +obj-$(CONFIG_DRM_IVIP) += ivip.o > > +ivip-objs := intel_vip_drv.o intel_vip_conn.o > > diff --git a/drivers/gpu/drm/ivip/intel_vip_conn.c > > b/drivers/gpu/drm/ivip/intel_vip_conn.c > > new file mode 100644 > > index 0000000..93ce0b3 > > --- /dev/null > > +++ b/drivers/gpu/drm/ivip/intel_vip_conn.c > > @@ -0,0 +1,91 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) 2019 Intel Corporation. > > + * > > + * intel_vip_conn.c -- Intel Video and Image Processing(VIP) > > + * Frame Buffer II driver > > + * > > + * This driver supports the Intel VIP Frame Reader component. > > + * More info on the hardware can be found in the Intel Video > > + * and Image Processing Suite User Guide at this address > > + * http://www.altera.com/literature/ug/ug_vip.pdf. > > + * > > + * Authors: > > + * Walter Goossens <waltergoossens@xxxxxxx> > > + * Thomas Chou <thomas@xxxxxxxxxxxxx> > > + * Chris Rauer <crauer@xxxxxxxxxx> > > + * Ong, Hean-Loong <hean.loong.ong@xxxxxxxxx> > > + * > > + */ > > + > > +#include <linux/init.h> > > +#include <linux/kernel.h> > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_crtc_helper.h> > > +#include <drm/drm_encoder_slave.h> > > +#include <drm/drm_plane_helper.h> > > + > > +static enum drm_connector_status > > +intelvipfb_drm_connector_detect(struct drm_connector *connector, > > bool force) > > +{ > > + return connector_status_connected; > > +} > > + > > +static void intelvipfb_drm_connector_destroy(struct drm_connector > > *connector) > > +{ > > + drm_connector_unregister(connector); > > + drm_connector_cleanup(connector); > > +} > > + > > +static const struct drm_connector_funcs > > intelvipfb_drm_connector_funcs = { > > + .detect = intelvipfb_drm_connector_detect, > > + .reset = drm_atomic_helper_connector_reset, > > + .fill_modes = drm_helper_probe_single_connector_modes, > > + .atomic_duplicate_state = > > drm_atomic_helper_connector_duplicate_state, > > + .atomic_destroy_state = > > drm_atomic_helper_connector_destroy_state, > > + .destroy = intelvipfb_drm_connector_destroy, > > +}; > > + > > +static int intelvipfb_drm_connector_get_modes(struct drm_connector > > *connector) > > +{ > > + struct drm_device *drm = connector->dev; > > + int count; > > + > > + count = drm_add_modes_noedid(connector, drm- > > >mode_config.max_width, > > + drm->mode_config.max_height); > > + drm_set_preferred_mode(connector, drm- > > >mode_config.max_width, > > + drm->mode_config.max_height); > > + return count; > > +} > > + > > +static const struct drm_connector_helper_funcs > > +intelvipfb_drm_connector_helper_funcs = { > > + .get_modes = intelvipfb_drm_connector_get_modes, > > +}; > > + > > +struct drm_connector * > > +intelvipfb_conn_setup(struct drm_device *drm) > > +{ > > + struct drm_connector *conn; > > + int ret; > > + > > + conn = devm_kzalloc(drm->dev, sizeof(*conn), GFP_KERNEL); > > + if (IS_ERR(conn)) > > + return NULL; > > + > > + drm_connector_helper_add(conn, > > &intelvipfb_drm_connector_helper_funcs); > > + ret = drm_connector_init(drm, conn, > > &intelvipfb_drm_connector_funcs, > > + DRM_MODE_CONNECTOR_DisplayPort); > > + if (ret < 0) { > > + dev_err(drm->dev, "failed to initialize drm > > connector\n"); > > + ret = -ENOMEM; > > + goto error_connector_cleanup; > > + } > > + > > + return conn; > > + > > +error_connector_cleanup: > > + drm_connector_cleanup(conn); > > + > > + return NULL; > > +} > > diff --git a/drivers/gpu/drm/ivip/intel_vip_drv.c > > b/drivers/gpu/drm/ivip/intel_vip_drv.c > > new file mode 100644 > > index 0000000..38790b7 > > --- /dev/null > > +++ b/drivers/gpu/drm/ivip/intel_vip_drv.c > > @@ -0,0 +1,332 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (C) 2019 Intel Corporation. > > + * > > + * intel_vip_core.c -- Intel Video and Image Processing(VIP) > > + * Frame Buffer II driver > > + * > > + * This driver supports the Intel VIP Frame Reader component. > > + * More info on the hardware can be found in the Intel Video > > + * and Image Processing Suite User Guide at this address > > + * http://www.altera.com/literature/ug/ug_vip.pdf. > > + * > > + * Authors: > > + * Walter Goossens <waltergoossens@xxxxxxx> > > + * Thomas Chou <thomas@xxxxxxxxxxxxx> > > + * Chris Rauer <crauer@xxxxxxxxxx> > > + * Ong, Hean-Loong <hean.loong.ong@xxxxxxxxx> > > + * > > + */ > > + > > +#include <drm/drm_atomic.h> > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_crtc_helper.h> > > +#include <drm/drm_fb_helper.h> > > +#include <drm/drm_fb_cma_helper.h> > > +#include <drm/drm_gem_cma_helper.h> > > +#include <drm/drm_gem_framebuffer_helper.h> > > +#include <drm/drm_plane_helper.h> > > +#include <drm/drm_simple_kms_helper.h> > > + > > +#include <linux/init.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > + > > +#include "intel_vip_drv.h" > > + > > +static inline struct intelvipfb_priv * > > +pipe_to_intelvipdrm(struct drm_simple_display_pipe *pipe) > > +{ > > + return container_of(pipe, struct intelvipfb_priv, pipe); > > +} > > + > > +DEFINE_DRM_GEM_CMA_FOPS(drm_fops); > > + > > +static struct drm_driver intelvipfb_drm = { > > + .driver_features = > > + DRIVER_MODESET | DRIVER_GEM | > > + DRIVER_PRIME | DRIVER_ATOMIC, > > + .gem_free_object_unlocked = drm_gem_cma_free_object, > > + .gem_vm_ops = &drm_gem_cma_vm_ops, > > + .dumb_create = drm_gem_cma_dumb_create, > > + .dumb_destroy = drm_gem_dumb_destroy, > > + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, > > + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, > > + .gem_prime_export = drm_gem_prime_export, > > + .gem_prime_import = drm_gem_prime_import, > > + .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table, > > + .gem_prime_import_sg_table = > > drm_gem_cma_prime_import_sg_table, > > + .gem_prime_vmap = drm_gem_cma_prime_vmap, > > + .gem_prime_vunmap = drm_gem_cma_prime_vunmap, > > + .gem_prime_mmap = drm_gem_cma_prime_mmap, > > + .name = DRIVER_NAME, > > + .date = "20190129", > > + .desc = "Intel FPGA VIP SUITE", > > + .major = 1, > > + .minor = 0, > > + .ioctls = NULL, > > + .patchlevel = 0, > > + .fops = &drm_fops, > > +}; > > + > > +/* > > + * Setting up information derived from OF Device Tree Nodes > > + * max-width, max-height, bits per pixel, memory port width > > + */ > > + > > +static int intelvipfb_drm_setup(struct device *dev, > > + struct intelvipfb_priv > > *priv) > > +{ > > + struct drm_device *drm = priv->drm; > > + struct device_node *np = dev->of_node; > > + int mem_word_width; > > + int max_h, max_w; > > + int ret; > > + > > + ret = of_property_read_u32(np, "altr,max-width", &max_w); > > + if (ret) { > > + dev_err(dev, > > + "Missing required parameter 'altr,max- > > width'"); > > + return ret; > > + } > > + > > + ret = of_property_read_u32(np, "altr,max-height", &max_h); > > + if (ret) { > > + dev_err(dev, > > + "Missing required parameter 'altr,max- > > height'"); > > + return ret; > > + } > > + > > + ret = of_property_read_u32(np, "altr,mem-port-width", > > &mem_word_width); > > + if (ret) { > > + dev_err(dev, "Missing required parameter > > 'altr,mem-port-width '"); > > + return ret; > > + } > > + > > + if (!(mem_word_width >= 32 && mem_word_width % 32 == 0)) { > > + dev_err(dev, > > + "mem-word-width is set to %i. must be >= > > 32 and multiple of 32.", > > + mem_word_width); > > + return -ENODEV; > > + } > > + > > + drm->mode_config.min_width = 640; > > + drm->mode_config.min_height = 480; > > + drm->mode_config.max_width = max_w; > > + drm->mode_config.max_height = max_h; > > + drm->mode_config.preferred_depth = 32; > > + > > + return 0; > > +} > > + > > +static int intelvipfb_of_probe(struct platform_device *pdev) > > +{ > > + int retval; > > + struct resource *reg_res; > > + struct intelvipfb_priv *priv; > > + struct device *dev = &pdev->dev; > > + struct drm_device *drm; > > + > > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); > > + if (!priv) > > + return -ENOMEM; > > + > > + /* setup DRM */ > > + drm = drm_dev_alloc(&intelvipfb_drm, dev); > > Just a tiny bikeshed: Recommended style nowadays is to use > drm_dev_init > an embed drm_device into your driver private structure. This means > you > can't use devm_kzalloc (but to be really strict, almost all usage of > devm_kzalloc in drm drivers is broken, but that's an entirely > different > story). Would be great to switch over to drm_dev_init to align better > with > some of the planned work we have. > Sure I think I can fix this > > > + if (IS_ERR(drm)) > > + return PTR_ERR(drm); > > + > > + retval = dma_set_mask_and_coherent(drm->dev, > > DMA_BIT_MASK(32)); > > + if (retval) > > + return -ENODEV; > > + > > + priv->drm = drm; > > + > > + reg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + if (!reg_res) > > + return -ENOMEM; > > + > > + priv->base = devm_ioremap_resource(dev, reg_res); > > + > > + if (IS_ERR(priv->base)) { > > + dev_err(dev, "devm_ioremap_resource failed\n"); > > + retval = PTR_ERR(priv->base); > > + return -ENOMEM; > > + } > > + > > + intelvipfb_drm_setup(dev, priv); > > + > > + dev_set_drvdata(dev, priv); > > + > > + return intelvipfb_probe(dev); > > +} > > + > > +static int intelvipfb_of_remove(struct platform_device *pdev) > > +{ > > + return intelvipfb_remove(&pdev->dev); > > +} > > + > > +static void intelvipfb_enable(struct drm_simple_display_pipe > > *pipe, > > + struct drm_crtc_state *crtc_state, > > + struct drm_plane_state * > > + plane_state) > > +{ > > + /* > > + * The frameinfo variable has to correspond to the size of > > the VIP Suite > > + * Frame Reader register 7 which will determine the > > maximum size used > > + * in this frameinfo > > + */ > > + struct intelvipfb_priv *priv = pipe_to_intelvipdrm(pipe); > > + u32 frameinfo; > > + void __iomem *base = priv->base; > > + struct drm_plane_state *state = pipe->plane.state; > > + dma_addr_t addr; > > + > > + addr = drm_fb_cma_get_gem_addr(state->fb, state, 0); > > + > > + frameinfo = > > + readl(base + INTELVIPFB_FRAME_READER) & > > 0x00ffffff; > > + writel(frameinfo, base + INTELVIPFB_FRAME_INFO); > > + writel(addr, base + INTELVIPFB_FRAME_START); > > + /* Finally set the control register to 1 to start > > streaming */ > > + writel(1, base + INTELVIPFB_CONTROL); > > +} > > + > > +static void intelvipfb_disable(struct drm_simple_display_pipe > > *pipe) > > +{ > > + struct intelvipfb_priv *priv = pipe_to_intelvipdrm(pipe); > > + void __iomem *base = priv->base; > > + /* set the control register to 0 to stop streaming */ > > + writel(0, base + INTELVIPFB_CONTROL); > > +} > > + > > +static const struct drm_mode_config_funcs > > intelvipfb_mode_config_funcs = { > > + .fb_create = drm_gem_fb_create, > > + .atomic_check = drm_atomic_helper_check, > > + .atomic_commit = drm_atomic_helper_commit, > > +}; > > + > > +static void intelvipfb_setup_mode_config(struct drm_device *drm) > > +{ > > + drm_mode_config_init(drm); > > + drm->mode_config.funcs = &intelvipfb_mode_config_funcs; > > +} > > + > > +void intelvipfb_display_pipe_update(struct drm_simple_display_pipe > > *pipe, > > + struct drm_plane_state > > *old_state) > > +{ > > + struct intelvipfb_priv *priv = pipe_to_intelvipdrm(pipe); > > + struct drm_framebuffer *fb = pipe->plane.state->fb; > > + struct drm_crtc *crtc = &priv->pipe.crtc; > > + > > + if (fb && fb != old_state->fb) { > > + if (priv->fb_dirty) > > + priv->fb_dirty(fb, NULL, 0, 0, NULL, 0); > > + } > > ->fb_dirty here seems entirely unused. It's also incomplete, there's > a lot > more to implementing manual upload support than just this here (you > need > to setup framebuffers with the dirty callback, plus register the new > damage property). Imo better if we add this when you start using it, > hence > please remove ->fb_dirty here and from the headers. Noted. > > > + > > + if (crtc->state->event) { > > + spin_lock_irq(&crtc->dev->event_lock); > > + drm_crtc_send_vblank_event(crtc, crtc->state- > > >event); > > + spin_unlock_irq(&crtc->dev->event_lock); > > + crtc->state->event = NULL; > > + } > > +} > > +EXPORT_SYMBOL(intelvipfb_display_pipe_update); > > + > > +static struct drm_simple_display_pipe_funcs priv_funcs = { > > + .prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb, > > + .update = intelvipfb_display_pipe_update, > > + .enable = intelvipfb_enable, > > + .disable = intelvipfb_disable > > +}; > > + > > +int intelvipfb_probe(struct device *dev) > > +{ > > + int retval; > > + struct drm_device *drm; > > + struct intelvipfb_priv *priv = dev_get_drvdata(dev); > > + > > + struct drm_connector *connector; > > + u32 formats[] = {DRM_FORMAT_XRGB8888}; > > + > > + drm = priv->drm; > > + > > + intelvipfb_setup_mode_config(drm); > > Personally I'd inline this, it's just 2 lines. > > > + > > + connector = intelvipfb_conn_setup(drm); > > + if (!connector) { > > + dev_err(drm->dev, "Connector setup failed\n"); > > + goto err_mode_config; > > + } > > + > > + retval = drm_simple_display_pipe_init(drm, > > + &priv->pipe, > > + &priv_funcs, > > + formats, > > + ARRAY_SIZE(formats > > ), > > + NULL, connector); > > + > > + if (retval < 0) { > > + dev_err(drm->dev, "Cannot setup simple display > > pipe\n"); > > + goto err_mode_config; > > + } > > + > > + drm_mode_config_reset(drm); > > + > > + drm_dev_register(drm, 0); > > + > > + drm_fbdev_generic_setup(drm, 32); > > + > > + dev_info(drm->dev, "ivip: Successfully created fb\n"); > > + > > + return retval; > > + > > +err_mode_config: > > + > > + drm_mode_config_cleanup(drm); > > + return -ENODEV; > > +} > > + > > +int intelvipfb_remove(struct device *dev) > > +{ > > + struct intelvipfb_priv *priv = dev_get_drvdata(dev); > > + struct drm_device *drm = priv->drm; > > + > > + drm_dev_unregister(drm); > > + > > + drm_mode_config_cleanup(drm); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id intelvipfb_of_match[] = { > > + { .compatible = "altr,vip-frame-buffer-2.0" }, > > + {}, > > +/* > > + * The name vip-frame-buffer-2.0 is derived from > > + * http://www.altera.com/literature/ug/ug_vip.pdf > > + * frame buffer IP cores section 14 > > + */ > > +}; > > + > > +MODULE_DEVICE_TABLE(of, intelvipfb_of_match); > > + > > +static struct platform_driver intelvipfb_driver = { > > + .probe = intelvipfb_of_probe, > > + .remove = intelvipfb_of_remove, > > + .driver = { > > + .name = DRIVER_NAME, > > + .of_match_table = intelvipfb_of_match, > > + }, > > +}; > > + > > +module_platform_driver(intelvipfb_driver); > > + > > +/* Original author of Altera Frame Buffer*/ > > +MODULE_AUTHOR("Walter Goossens <waltergoossens@xxxxxxx>"); > > +MODULE_AUTHOR("Thomas Chou <thomas@xxxxxxxxxxxxx>"); > > +MODULE_AUTHOR("Chris Rauer <crauer@xxxxxxxxxx>"); > > +/* Author of Intel FPGA Frame Buffer II*/ > > +MODULE_AUTHOR("Ong, Hean-Loong <hean.loong.ong@xxxxxxxxx>"); > > +MODULE_DESCRIPTION("Intel VIP Frame Buffer II driver"); > > +MODULE_LICENSE("GPL v2"); > > diff --git a/drivers/gpu/drm/ivip/intel_vip_drv.h > > b/drivers/gpu/drm/ivip/intel_vip_drv.h > > new file mode 100644 > > index 0000000..821e74e > > --- /dev/null > > +++ b/drivers/gpu/drm/ivip/intel_vip_drv.h > > @@ -0,0 +1,73 @@ > > +/* SPDX-License-Identifier: GPL-2.0 */ > > +/* > > + * Copyright (C) 2019 Intel Corporation. > > + * > > + * Intel Video and Image Processing(VIP) Frame Buffer II driver. > > + * Frame Buffer II driver > > + * > > + * This driver supports the Intel VIP Frame Reader component. > > + * More info on the hardware can be found in the Intel Video > > + * and Image Processing Suite User Guide at this address > > + * http://www.altera.com/literature/ug/ug_vip.pdf. > > + * > > + * Authors: > > + * Walter Goossens <waltergoossens@xxxxxxx> > > + * Thomas Chou <thomas@xxxxxxxxxxxxx> > > + * Chris Rauer <crauer@xxxxxxxxxx> > > + * Ong, Hean-Loong <hean.loong.ong@xxxxxxxxx> > > + * > > + */ > > +#ifndef _INTEL_VIP_DRV_H > > +#define _INTEL_VIP_DRV_H > > + > > +#define DRIVER_NAME "intelvipfb" > > +#define BYTES_PER_PIXEL 4 > > +#define CRTC_NUM 1 > > +#define CONN_NUM 1 > > + > > +/* control registers */ > > +#define INTELVIPFB_CONTROL 0 > > +#define INTELVIPFB_STATUS 0x4 > > +#define INTELVIPFB_INTERRUPT 0x8 > > +#define INTELVIPFB_FRAME_COUNTER 0xC > > +#define INTELVIPFB_FRAME_DROP 0x10 > > +#define INTELVIPFB_FRAME_INFO 0x14 > > +#define INTELVIPFB_FRAME_START 0x18 > > +#define INTELVIPFB_FRAME_READER 0x1C > > + > > +int intelvipfb_probe(struct device *dev); > > +int intelvipfb_remove(struct device *dev); > > +int intelvipfb_setup_crtc(struct drm_device *drm); > > +struct drm_connector *intelvipfb_conn_setup(struct drm_device > > *drm); > > + > > +struct intelvipfb_priv { > > + /** > > + * @pipe: Display pipe structure > > + */ > > + struct drm_simple_display_pipe pipe; > > + > > + /** > > + * @drm: DRM device > > + */ > > + struct drm_device *drm; > > + > > + /** > > + * @dirty_lock: Serializes framebuffer flushing > > + */ > > + struct mutex dirty_lock; > > + > > + /** > > + * @base: Base memory for the framebuffer > > + */ > > + void __iomem *base; > > + > > + /** > > + * @fb_dirty: Framebuffer dirty callback > > + */ > > + int (*fb_dirty)(struct drm_framebuffer *framebuffer, > > + struct drm_file *file_priv, unsigned int > > flags, > > + unsigned int color, struct drm_clip_rect > > *clips, > > + unsigned int num_clips); > > +}; > > + > > +#endif > > Very tidy driver, nice work. This looks ready (aside from the tiny > nits), > one last question: What's the plan with maintainig this? For small > drivers > I always recommend drm-misc: > > https://drm.pages.freedesktop.org/maintainer-tools/committer-drm-misc > .html#small-drivers > > This would mean you'd need to familiarize yourself with the tooling > and > everything. But this also only makes sense if you expect that there > will > be more contributions from your (or your team). > > If you want to maintain this in drm-misc pls also add a corresponding > MAINTAINERS entry, with you as maintainer and the drm-misc repo as > git > repo. > > Cheers, Daniel Thanks for looking into this Daniel. Currently there are no long term roadmap for this driver but it has to be in the upstream kernel. I'd like to contribute to drm-misc however I'd need some guidance in familiarizing myself with the tooling. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
