On 2/9/19 1:52 AM, Mario Kleiner wrote:
> In VRR mode, keep track of the vblank count of the last
> completed pageflip in amdgpu_crtc->last_flip_vblank, as
> recorded in the pageflip completion handler after each
> completed flip.
>
> Use that count to prevent mmio programming a new pageflip
> within the same vblank in which the last pageflip completed,
> iow. to throttle pageflips to at most one flip per video
> frame, while at the same time allowing to request a flip
> not only before start of vblank, but also anywhere within
> vblank.
>
> The old logic did the same, and made sense for regular fixed
> refresh rate flipping, but in vrr mode it prevents requesting
> a flip anywhere inside the possibly huge vblank, thereby
> reducing framerate in vrr mode instead of improving it, by
> delaying a slightly delayed flip requests up to a maximum
> vblank duration + 1 scanout duration. This would limit VRR
> usefulness to only help applications with a very high GPU
> demand, which can submit the flip request before start of
> vblank, but then have to wait long for fences to complete.
>
> With this method a flip can be both requested and - after
> fences have completed - executed, ie. it doesn't matter if
> the request (amdgpu_dm_do_flip()) gets delayed until deep
> into the extended vblank due to cpu execution delays. This
> also allows clients which want to regulate framerate within
> the vrr range a much more fine-grained control of flip timing,
> a feature that might be useful for video playback, and is
> very useful for neuroscience/vision research applications.
>
> In regular non-VRR mode, retain the old flip submission
> behavior. This to keep flip scheduling for fullscreen X11/GLX
> OpenGL clients intact, if they use the GLX_OML_sync_control
> extensions glXSwapBufferMscOML(, ..., target_msc,...) function
> with a specific target_msc target vblank count.
>
> glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will
> not flip at the proper target_msc for a non-zero target_msc
> if VRR mode is active with this patch. They'd often flip one
> frame too early. However, this limitation should not matter
> much in VRR mode, as scheduling based on vblank counts is
> pretty futile/unusable under variable refresh duration
> anyway, so no real extra harm is done.
>
> According to some testing already done with this patch by
> Nicholas on top of my tests, IGT tests didn't report any
> problems. If fixes stuttering and flickering when flipping
> at rates below the minimum vrr refresh rate.
>
> Fixes: bb47de736661 ("drm/amdgpu: Set FreeSync state using drm VRR
> properties")
> Signed-off-by: Mario Kleiner <mario.kleiner.de@xxxxxxxxx>
> Cc: <stable@xxxxxxxxxxxxxxx>
> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
> Cc: Harry Wentland <harry.wentland@xxxxxxx>
> Cc: Alex Deucher <alexander.deucher@xxxxxxx>
> Cc: Michel Dänzer <michel@xxxxxxxxxxx>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
I can confirm I've tested this a bit as well and it looks reasonable to
me. This patch really helps avoid large or frequent changes in timeout
duration in the case where we take too long from the last and flip and
we're already in the next vblank interval by the time we get into commit
tail.
It's unfortunate that this changes the behavior of how waiting for the
next vblank interval works when VRR is active but I can't really think
of a case where we would want anything else but this.
For applications where timing and scheduling like this really matters I
think we'd need to look into adding the target presentation timestamp to
have full control over this kind of behavior from userspace in the first
place. Along with some sort of control over async page-flipping in the
atomic commit IOCTL as well.
Nicholas Kazlauskas
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h | 1 +
> .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 33 ++++++++++++++++---
> 2 files changed, 30 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> index bfa394ffd6d2..87ca5746f861 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h
> @@ -411,6 +411,7 @@ struct amdgpu_crtc {
> struct amdgpu_flip_work *pflip_works;
> enum amdgpu_flip_status pflip_status;
> int deferred_flip_completion;
> + u64 last_flip_vblank;
> /* pll sharing */
> struct amdgpu_atom_ss ss;
> bool ss_enabled;
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index d59bafc84475..d4da331aa349 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -303,12 +303,11 @@ static void dm_pflip_high_irq(void *interrupt_params)
> return;
> }
>
> + /* Update to correct count(s) if racing with vblank irq */
> + amdgpu_crtc->last_flip_vblank = drm_crtc_accurate_vblank_count(&amdgpu_crtc->base);
>
> /* wake up userspace */
> if (amdgpu_crtc->event) {
> - /* Update to correct count(s) if racing with vblank irq */
> - drm_crtc_accurate_vblank_count(&amdgpu_crtc->base);
> -
> drm_crtc_send_vblank_event(&amdgpu_crtc->base, amdgpu_crtc->event);
>
> /* page flip completed. clean up */
> @@ -4736,6 +4735,8 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
> struct amdgpu_bo *abo;
> uint64_t tiling_flags, dcc_address;
> uint32_t target, target_vblank;
> + uint64_t last_flip_vblank;
> + bool vrr_active = acrtc_state->freesync_config.state == VRR_STATE_ACTIVE_VARIABLE;
>
> struct {
> struct dc_surface_update surface_updates[MAX_SURFACES];
> @@ -4889,7 +4890,31 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
> * hopefully eliminating dc_*_update structs in their entirety.
> */
> if (flip_count) {
> - target = (uint32_t)drm_crtc_vblank_count(pcrtc) + *wait_for_vblank;
> + if (!vrr_active) {
> + /* Use old throttling in non-vrr fixed refresh rate mode
> + * to keep flip scheduling based on target vblank counts
> + * working in a backwards compatible way, e.g., for
> + * clients using the GLX_OML_sync_control extension or
> + * DRI3/Present extension with defined target_msc.
> + */
> + last_flip_vblank = drm_crtc_vblank_count(pcrtc);
> + }
> + else {
> + /* For variable refresh rate mode only:
> + * Get vblank of last completed flip to avoid > 1 vrr
> + * flips per video frame by use of throttling, but allow
> + * flip programming anywhere in the possibly large
> + * variable vrr vblank interval for fine-grained flip
> + * timing control and more opportunity to avoid stutter
> + * on late submission of flips.
> + */
> + spin_lock_irqsave(&pcrtc->dev->event_lock, flags);
> + last_flip_vblank = acrtc_attach->last_flip_vblank;
> + spin_unlock_irqrestore(&pcrtc->dev->event_lock, flags);
> + }
> +
> + target = (uint32_t)last_flip_vblank + *wait_for_vblank;
> +
> /* Prepare wait for target vblank early - before the fence-waits */
> target_vblank = target - (uint32_t)drm_crtc_vblank_count(pcrtc) +
> amdgpu_get_vblank_counter_kms(pcrtc->dev, acrtc_attach->crtc_id);
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
