The TI TFP410 is a DVI encoder, not a full HDMI encoder. Its output can
be routed to a DVI-D connector, even if in many cases embedded systems
will use an HDMI connector to carry the DVI signals.
Instead of hardcoding the connector type to HDMI, retrieve the connector
type from its DT node.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Reviewed-by: Jyri Sarha <jsarha@xxxxxx>
Tested-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/ti-tfp410.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
index 7bfb4f338813..daf0967e00ba 100644
--- a/drivers/gpu/drm/bridge/ti-tfp410.c
+++ b/drivers/gpu/drm/bridge/ti-tfp410.c
@@ -27,6 +27,7 @@
struct tfp410 {
struct drm_bridge bridge;
struct drm_connector connector;
+ unsigned int connector_type;
struct i2c_adapter *ddc;
struct gpio_desc *hpd;
@@ -126,7 +127,7 @@ static int tfp410_attach(struct drm_bridge *bridge)
drm_connector_helper_add(&dvi->connector,
&tfp410_con_helper_funcs);
ret = drm_connector_init(bridge->dev, &dvi->connector,
- &tfp410_con_funcs, DRM_MODE_CONNECTOR_HDMIA);
+ &tfp410_con_funcs, dvi->connector_type);
if (ret) {
dev_err(dvi->dev, "drm_connector_init() failed: %d\n", ret);
return ret;
@@ -172,6 +173,11 @@ static int tfp410_get_connector_properties(struct tfp410 *dvi)
if (!connector_node)
return -ENODEV;
+ if (of_device_is_compatible(connector_node, "hdmi-connector"))
+ dvi->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+ else
+ dvi->connector_type = DRM_MODE_CONNECTOR_DVID;
+
dvi->hpd = fwnode_get_named_gpiod(&connector_node->fwnode,
"hpd-gpios", 0, GPIOD_IN, "hpd");
if (IS_ERR(dvi->hpd)) {
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
