On Fri, Feb 08, 2019 at 06:36:39PM +0530, Sharma, Shashank wrote: > Regards > > Shashank > > On 2/8/2019 6:22 PM, Ville Syrjälä wrote: > > On Fri, Feb 08, 2019 at 12:36:25PM +0000, Sharma, Shashank wrote: > >> Regards > >> Shashank > >> > >>> -----Original Message----- > >>> From: Intel-gfx [mailto:intel-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of > >>> Shankar, Uma > >>> Sent: Friday, February 8, 2019 5:45 PM > >>> To: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > >>> Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; Syrjala, Ville <ville.syrjala@xxxxxxxxx>; dri- > >>> devel@xxxxxxxxxxxxxxxxxxxxx; Lankhorst, Maarten <maarten.lankhorst@xxxxxxxxx> > >>> Subject: Re: [Intel-gfx] [v11 1/4] drm: Add HDMI colorspace property > >>> > >>>>>>>> -----Original Message----- > >>>>>>>> From: Ville Syrjälä [mailto:ville.syrjala@xxxxxxxxxxxxxxx] > >>>>>>>> Sent: Tuesday, February 5, 2019 10:02 PM > >>>>>>>> To: Shankar, Uma <uma.shankar@xxxxxxxxx> > >>>>>>>> Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; > >>>>>>>> dri-devel@xxxxxxxxxxxxxxxxxxxxx; Syrjala, Ville > >>>>>>>> <ville.syrjala@xxxxxxxxx>; Lankhorst, Maarten > >>>>>>>> <maarten.lankhorst@xxxxxxxxx> > >>>>>>>> Subject: Re: [Intel-gfx] [v11 1/4] drm: Add HDMI colorspace > >>>>>>>> property > >>>>>>>> > >>>>>>>> On Tue, Feb 05, 2019 at 09:33:34PM +0530, Uma Shankar wrote: > >>>>>>>>> Create a new connector property to program colorspace to sink devices. > >>>>>>>>> Modern sink devices support more than 1 type of colorspace like > >>>>>>>>> 601, 709, BT2020 etc. This helps to switch based on content > >>>>>>>>> type which is to be displayed. The decision lies with > >>>>>>>>> compositors as to in which scenarios, a particular colorspace will be picked. > >>>>>>>>> > >>>>>>>>> This will be helpful mostly to switch to higher gamut > >>>>>>>>> colorspaces like > >>>>>>>>> BT2020 when the media content is encoded as BT2020. Thereby > >>>>>>>>> giving a good visual experience to users. > >>>>>>>>> > >>>>>>>>> The expectation from userspace is that it should parse the EDID > >>>>>>>>> and get supported colorspaces. Use this property and switch to > >>>>>>>>> the one supported. Sink supported colorspaces should be > >>>>>>>>> retrieved by userspace from EDID and driver will not explicitly > >>>>>>>>> expose > >>>> them. > >>>>>>>>> Basically the expectation from userspace is: > >>>>>>>>> - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink > >>>>>>>>> colorspace > >>>>>>>>> - Set this new property to let the sink know what it > >>>>>>>>> converted the CRTC output to. > >>>>>>>>> > >>>>>>>>> v2: Addressed Maarten and Ville's review comments. Enhanced the > >>>>>>>>> colorspace enum to incorporate both HDMI and DP supported > >>>> colorspaces. > >>>>>>>>> Also, added a default option for colorspace. > >>>>>>>>> > >>>>>>>>> v3: Removed Adobe references from enum definitions as per > >>>>>>>>> Ville, Hans Verkuil and Jonas Karlman suggestions. Changed > >>>>>>>>> Default to an unset state where driver will assign the > >>>>>>>>> colorspace is not chosen by user, suggested by Ville and > >>>>>>>>> Maarten. Addressed other misc review comments from Maarten. > >>>>>>>>> Split the changes to have separate colorspace property for DP and HDMI. > >>>>>>>>> > >>>>>>>>> v4: Addressed Chris and Ville's review comments, and created a > >>>>>>>>> common colorspace property for DP and HDMI, filtered the list > >>>>>>>>> based on the colorspaces supported by the respective protocol standard. > >>>>>>>>> > >>>>>>>>> v5: Made the property creation helper accept enum list based on > >>>>>>>>> platform capabilties as suggested by Shashank. Consolidated > >>>>>>>>> HDMI and DP property creation in the common helper. > >>>>>>>>> > >>>>>>>>> v6: Addressed Shashank's review comments. > >>>>>>>>> > >>>>>>>>> v7: Added defines instead of enum in uapi as per Brian > >>>>>>>>> Starkey's suggestion in order to go with string matching at userspace. > >>>>>>>>> Updated the commit message to add more details as well kernel docs. > >>>>>>>>> > >>>>>>>>> v8: Addressed Maarten's review comments. > >>>>>>>>> > >>>>>>>>> v9: Removed macro defines from uapi as per Brian Starkey and > >>>>>>>>> Daniel Stone's comments and moved to drm include file. Moved > >>>>>>>>> back to older design with exposing all HDMI colorspaces to > >>>>>>>>> userspace since infoframe capability is there even on legacy > >>>>>>>>> platforms, as per Ville's review comments. > >>>>>>>>> > >>>>>>>>> v10: Fixed sparse warnings, updated the RB from Maarten and Jani's ack. > >>>>>>>>> > >>>>>>>>> v11: Addressed Ville's review comments. Updated the Macro > >>>>>>>>> naming and added DCI-P3 colorspace as well defined in CEA 861.G spec. > >>>>>>>>> > >>>>>>>>> Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx> > >>>>>>>>> Acked-by: Jani Nikula <jani.nikula@xxxxxxxxx> > >>>>>>>>> Reviewed-by: Shashank Sharma <shashank.sharma@xxxxxxxxx> > >>>>>>>>> Reviewed-by: Maarten Lankhorst > >>>>>>>>> <maarten.lankhorst@xxxxxxxxxxxxxxx> > >>>>>>>>> --- > >>>>>>>>> drivers/gpu/drm/drm_atomic_uapi.c | 4 ++ > >>>>>>>>> drivers/gpu/drm/drm_connector.c | 78 > >>>>>>>> +++++++++++++++++++++++++++++++++++++++ > >>>>>>>>> include/drm/drm_connector.h | 50 +++++++++++++++++++++++++ > >>>>>>>>> 3 files changed, 132 insertions(+) > >>>>>>>>> > >>>>>>>>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c > >>>>>>>>> b/drivers/gpu/drm/drm_atomic_uapi.c > >>>>>>>>> index 9a1f41a..9b5d44f 100644 > >>>>>>>>> --- a/drivers/gpu/drm/drm_atomic_uapi.c > >>>>>>>>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c > >>>>>>>>> @@ -746,6 +746,8 @@ static int > >>>>>>>>> drm_atomic_connector_set_property(struct > >>>>>>>> drm_connector *connector, > >>>>>>>>> return -EINVAL; > >>>>>>>>> } > >>>>>>>>> state->content_protection = val; > >>>>>>>>> + } else if (property == connector->colorspace_property) { > >>>>>>>>> + state->colorspace = val; > >>>>>>>>> } else if (property == config->writeback_fb_id_property) { > >>>>>>>>> struct drm_framebuffer *fb = > >>>> drm_framebuffer_lookup(dev, > >>>>>>>> NULL, val); > >>>>>>>>> int ret = > >>>> drm_atomic_set_writeback_fb_for_connector(state, > >>>>>>>> fb); @@ > >>>>>>>>> -814,6 +816,8 @@ static int > >>>>>>>>> drm_atomic_connector_set_property(struct > >>>>>>>> drm_connector *connector, > >>>>>>>>> *val = state->picture_aspect_ratio; > >>>>>>>>> } else if (property == config->content_type_property) { > >>>>>>>>> *val = state->content_type; > >>>>>>>>> + } else if (property == connector->colorspace_property) { > >>>>>>>>> + *val = state->colorspace; > >>>>>>>>> } else if (property == connector->scaling_mode_property) { > >>>>>>>>> *val = state->scaling_mode; > >>>>>>>>> } else if (property == > >>>>>>>>> connector->content_protection_property) > >>>>>>>>> { diff --git a/drivers/gpu/drm/drm_connector.c > >>>>>>>>> b/drivers/gpu/drm/drm_connector.c index 8475396..4309873 100644 > >>>>>>>>> --- a/drivers/gpu/drm/drm_connector.c > >>>>>>>>> +++ b/drivers/gpu/drm/drm_connector.c > >>>>>>>>> @@ -826,6 +826,33 @@ int > >>>>>>>>> drm_display_info_set_bus_formats(struct > >>>>>>>>> drm_display_info *info, }; > >>>>>>>>> DRM_ENUM_NAME_FN(drm_get_content_protection_name, > >>>>>>>> drm_cp_enum_list) > >>>>>>>>> +static const struct drm_prop_enum_list hdmi_colorspaces[] = { > >>>>>>>>> + /* For Default case, driver will set the colorspace */ > >>>>>>>>> + { DRM_MODE_COLORIMETRY_DEFAULT, "Default" }, > >>>>>>>>> + /* Standard Definition Colorimetry based on CEA 861 */ > >>>>>>>>> + { DRM_MODE_COLORIMETRY_SMPTE_170M, "SMPTE_170M" }, > >>>>>>>>> + { DRM_MODE_COLORIMETRY_BT709, "BT709" }, > >>>>>>>>> + /* Standard Definition Colorimetry based on IEC 61966-2-4 */ > >>>>>>>>> + { DRM_MODE_COLORIMETRY_XVYCC_601, "XVYCC_601" }, > >>>>>>>>> + /* High Definition Colorimetry based on IEC 61966-2-4 */ > >>>>>>>>> + { DRM_MODE_COLORIMETRY_XVYCC_709, "XVYCC_709" }, > >>>>>>>>> + /* Colorimetry based on IEC 61966-2-1/Amendment 1 */ > >>>>>>>>> + { DRM_MODE_COLORIMETRY_SYCC_601, "SYCC_601" }, > >>>>>>>>> + /* Colorimetry based on IEC 61966-2-5 [33] */ > >>>>>>>>> + { DRM_MODE_COLORIMETRY_OPYCC_601, "opYCC_601" }, > >>>>>>>>> + /* Colorimetry based on IEC 61966-2-5 */ > >>>>>>>>> + { DRM_MODE_COLORIMETRY_OPRGB, "opRGB" }, > >>>>>>>>> + /* Colorimetry based on ITU-R BT.2020 */ > >>>>>>>>> + { DRM_MODE_COLORIMETRY_BT2020_YCC, "BT2020_YCC" }, > >>>>>>>>> + /* Colorimetry based on ITU-R BT.2020 */ > >>>>>>>>> + { DRM_MODE_COLORIMETRY_BT2020_RGB, "BT2020_RGB" }, > >>>>>>>>> + /* Colorimetry based on ITU-R BT.2020 */ > >>>>>>>>> + { DRM_MODE_COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" }, > >>>>>>>>> + /* Added as part of Additional Colorimetry Extension in 861.G */ > >>>>>>>>> + { DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65, "DCI- > >>>> P3_RGB_D65" }, > >>>>>>>>> + { DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER, "DCI- > >>>>>>>> P3_RGB_Theater" }, > >>>>>>>>> +}; > >>>>>>>>> + > >>>>>>>>> /** > >>>>>>>>> * DOC: standard connector properties > >>>>>>>>> * > >>>>>>>>> @@ -1548,6 +1575,57 @@ int > >>>>>>>>> drm_mode_create_aspect_ratio_property(struct drm_device *dev) > >>>>>>>>> EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); > >>>>>>>>> > >>>>>>>>> /** > >>>>>>>>> + * DOC: standard connector properties > >>>>>>>>> + * > >>>>>>>>> + * Colorspace: > >>>>>>>>> + * drm_mode_create_colorspace_property - create colorspace > >>>> property > >>>>>>>>> + * This property helps select a suitable colorspace based on the sink > >>>>>>>>> + * capability. Modern sink devices support wider gamut like BT2020. > >>>>>>>>> + * This helps switch to BT2020 mode if the BT2020 encoded video > >>>> stream > >>>>>>>>> + * is being played by the user, same for any other colorspace. Thereby > >>>>>>>>> + * giving a good visual experience to users. > >>>>>>>>> + * > >>>>>>>>> + * The expectation from userspace is that it should parse the EDID > >>>>>>>>> + * and get supported colorspaces. Use this property and switch to the > >>>>>>>>> + * one supported. Sink supported colorspaces should be retrieved by > >>>>>>>>> + * userspace from EDID and driver will not explicitly expose them. > >>>>>>>>> + * > >>>>>>>>> + * Basically the expectation from userspace is: > >>>>>>>>> + * - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink > >>>>>>>>> + * colorspace > >>>>>>>>> + * - Set this new property to let the sink know what it > >>>>>>>>> + * converted the CRTC output to. > >>>>>>>>> + * - This property is just to inform sink what colorspace > >>>>>>>>> + * source is trying to drive. > >>>>>>>>> + * > >>>>>>>>> + * Called by a driver the first time it's needed, must be > >>>>>>>>> +attached to desired > >>>>>>>>> + * connectors. > >>>>>>>>> + */ > >>>>>>>>> +int drm_mode_create_colorspace_property(struct drm_connector > >>>>>>>>> +*connector) { > >>>>>>>>> + struct drm_device *dev = connector->dev; > >>>>>>>>> + struct drm_property *prop; > >>>>>>>>> + > >>>>>>>>> + if (connector->connector_type == > >>>> DRM_MODE_CONNECTOR_HDMIA || > >>>>>>>>> + connector->connector_type == > >>>> DRM_MODE_CONNECTOR_HDMIB) { > >>>>>>>>> + prop = drm_property_create_enum(dev, > >>>>>>>> DRM_MODE_PROP_ENUM, > >>>>>>>>> + "Colorspace", > >>>>>>>>> + hdmi_colorspaces, > >>>>>>>>> + > >>>>>>>> ARRAY_SIZE(hdmi_colorspaces)); > >>>>>>>>> + if (!prop) > >>>>>>>>> + return -ENOMEM; > >>>>>>>>> + } else { > >>>>>>>>> + DRM_DEBUG_KMS("Colorspace property not > >>>> supported\n"); > >>>>>>>>> + return 0; > >>>>>>>>> + } > >>>>>>>>> + > >>>>>>>>> + connector->colorspace_property = prop; > >>>>>>>>> + > >>>>>>>>> + return 0; > >>>>>>>>> +} > >>>>>>>>> +EXPORT_SYMBOL(drm_mode_create_colorspace_property); > >>>>>>>>> + > >>>>>>>>> +/** > >>>>>>>>> * drm_mode_create_content_type_property - create content type > >>>> property > >>>>>>>>> * @dev: DRM device > >>>>>>>>> * > >>>>>>>>> diff --git a/include/drm/drm_connector.h > >>>>>>>>> b/include/drm/drm_connector.h index 9941613..58db66e 100644 > >>>>>>>>> --- a/include/drm/drm_connector.h > >>>>>>>>> +++ b/include/drm/drm_connector.h > >>>>>>>>> @@ -253,6 +253,42 @@ enum drm_panel_orientation { > >>>>>>>>> DRM_MODE_PANEL_ORIENTATION_RIGHT_UP, > >>>>>>>>> }; > >>>>>>>>> > >>>>>>>>> +/* > >>>>>>>>> + * This is a consolidated colorimetry list supported by HDMI > >>>>>>>>> +and > >>>>>>>>> + * DP protocol standard. The respective connectors will > >>>>>>>>> +register > >>>>>>>>> + * a property with the subset of this list (supported by that > >>>>>>>>> + * respective protocol). Userspace will set the colorspace > >>>>>>>>> +through > >>>>>>>>> + * a colorspace property which will be created and exposed to > >>>>>>>>> + * userspace. > >>>>>>>>> + */ > >>>>>>>>> + > >>>>>>>>> +/* For Default case, driver will set the colorspace */ > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_DEFAULT 0 > >>>>>>>>> +/* CEA 861 Normal Colorimetry options */ > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_NO_DATA 0 > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_SMPTE_170M > >>>>>> 1 > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_BT709 2 > >>>>>>>> Still missing the YCbCr information in these two. > >>>>>>> As per CTA 861.G spec, we have these as only SMPTE_170M and ITU-R > >>>>>>> BT709, with no specific mention of RGB or YCbCr. Hence, kept it as > >>>>>>> per spec. We seem to have a common field for both as per CTA spec. > >>>>>>> Correct me if my understanding is wrong. > >>>>>> Check > >>>>>> "Table 14 Picture Colorimetry Indicated by the RGB or YC B C R (Y), > >>>>>> Colorimetry > >>>>>> (C) and Extended Colorimetry (EC) Field Settings" > >>>>> These Y2 Y1 Y0 values should be programmed separately and not > >>>>> through the colorspace as they are data formats isn't it. I feel this > >>>>> should get controlled separately independent of colorimetry, or > >>>>> should we add all the YCbCr and RGB versions and program them as part > >>>>> of this property itself > >>>> ? > >>>> > >>>> I don't think we can separate them. The values of the colorimetry bits > >>>> doesn't mean anything without the Y bits. It would make the uapi kinda > >>>> crazy if we allow the user to specify BT.2020 RGB but then we actually > >>>> signal BT.2020 YCbCr in the infoframe, or vice versa. Or we just signal > >>>> a totally invalid value for all the other cases. > >>> I agree we need data format also to be send along with colorspace, but they are 2 > >>> different things. To handle YCbCr and variants (YUV 444, 420 or 422) and RGB I feel > >>> we should expose a different API instead of using this one. We can create an output > >>> csc property which does that job for us. > >>> > >>> So from a user perspective if we wants to set a colorspace we should use the one in > >>> this series and set the data format separately using the other interface. Both will be > >>> received in the state variables and later Infoframe packet will be created accordingly. > >>> Clubbing both in one may lead to lot of possible combinations exposed as enum > >>> which may not look too clean. > >>> > >>> What do you say about handling that in the output csc property. I will go with what you > >>> recommend . > >> Programming Y2Y1Y0 is already taken care of, when we added support for YCBCR outputs (4:2:0 implementation). > >> In intel_hdmi.c:intel_hdmi_set_avi_infoframe(): > >> > >> if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) > >> frame.avi.colorspace = HDMI_COLORSPACE_YUV420; > >> else if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) > >> frame.avi.colorspace = HDMI_COLORSPACE_YUV444; > >> else > >> frame.avi.colorspace = HDMI_COLORSPACE_RGB; > >> > >> IMO This looks like a better way to handle this, ie while adding support for a new format, add support for corresponding AVI IF fileds. This will also make scope of the property under discussion less complicated. > > That's an exceptional case. We're programming the CSC in that case > > to do the RGB->YCbCr conversion without telling userspace. So we > > must also configure the Y bits automagically. > > > > What we want is a check like so: > > > > if (prop.colorspace != default && output_format != RGB) > > return -INVAL; > > > > because we can't set up the CSC to make a mess of the user's > > carefully crafted pixels. The pixels might not even contain > > RGB data in that case. > > > > We'll need to extend that a little bit once we add the explicit > > control of the output CSC via another prop. But the same > > principle should hold. > > In fact, I remember the reason why we created infrastructure like this, > so that, going forward, we could just add a output_format property, for > which, we already have the backed and the state variables ready. The > consume of this backend can be this drm_property (like output_format), > or internal modeset like YCBCR4:2:0 only modes in EDID. It will also be > inline with your suggestion of CSC property. > > So we can have two properties colorspace (BT2020/SRGB/REC709) and > color_model/color_format(RGB/YCBCR444/420), and a combination of both > should program the output AVI info-frames. Does it appeal you ? I'm not sure it's feasible to split it like that. The combinations supported by the infoframe are rather specific so trying to split it up leads to either super limited uapi, or one that exposes a lot of illegal combinations. Also DP has slightly different set of things it supports which adds more complications. So I think the best option is still to include the Y=yes/no information in the prop value alognside the C/EC/ACE bits. > > - Shashank > > > > >>> Regards, > >>> Uma Shankar > >>> > >>> > >>> > >>>>> My idea was just to update colorimetry fields alone as part of this interface. > >>>>> > >>>>>>>>> +/* CEA 861 Extended Colorimetry Options */ #define > >>>>>>>>> +DRM_MODE_COLORIMETRY_XVYCC_601 > >>>> 3 > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_XVYCC_709 > >>>> 4 > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_SYCC_601 5 > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_OPYCC_601 > >>>> 6 > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_OPRGB 7 > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_BT2020_YCC > >>>> 8 > >>>>>>>>> +/* Both BT2020_RGB and BT2020_YCbCbCr have same value */ > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_BT2020_RGB > >>>> 9 > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_BT2020_CYCC 9 > >>>>>>>> I though you didn't want these numbers to be based on the spec > >>>>>>>> numbers? This duplicated value seems to go against that idea. > >>>>>>> Yeah, for HDMI somehow was trying to utilize the definitions to > >>>>>>> advantage. But I feel, It's better to de-couple this. Define this > >>>>>>> as normal enum values sequentially so that userspace get readable > >>>>>>> serial number > >>>>>> kind values. > >>>>>>> And use these in encoder files to get proper values to be > >>>>>>> programmed as per respective spec, while defining those values per > >>>>>>> encoder > >>>> separately. > >>>>>> Hope this is fine. > >>>>>>>>> +/* Additional Colorimetry extension added as part of CTA 861.G */ > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65 10 > >>>>>>>>> +#define DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER > >>>>>> 11 > >>>>>>>>> + > >>>>>>>>> +/* DP MSA Colorimetry Options */ #define > >>>>>>>>> +DRM_MODE_DP_COLORIMETRY_YCBCR_ITU_601 > >>>> 12 > >>>>>>>>> +#define DRM_MODE_DP_COLORIMETRY_YCBCR_ITU_709 > >>>> 13 > >>>>>>>> Still inconsistent naming in many places (ITU_ vs. BT, YCBCR vs. > >>>>>>>> YCC, order of the two). > >>>>>>> Will fix this. Thanks Ville. > >>>>>>> > >>>>>>>>> +#define DRM_MODE_DP_COLORIMETRY_SRGB 14 > >>>>>>>>> +#define DRM_MODE_DP_COLORIMETRY_RGB_WIDE_GAMUT > >>>>>> 15 > >>>>>>>>> +#define DRM_MODE_DP_COLORIMETRY_SCRGB > >>>> 16 > >>>>>>>>> + > >>>>>>>>> /** > >>>>>>>>> * struct drm_display_info - runtime data about the connected sink > >>>>>>>>> * > >>>>>>>>> @@ -503,6 +539,13 @@ struct drm_connector_state { > >>>>>>>>> unsigned int content_protection; > >>>>>>>>> > >>>>>>>>> /** > >>>>>>>>> + * @colorspace: State variable for Connector property to request > >>>>>>>>> + * colorspace change on Sink. This is most commonly used to > >>>> switch > >>>>>>>>> + * to wider color gamuts like BT2020. > >>>>>>>>> + */ > >>>>>>>>> + u32 colorspace; > >>>>>>>>> + > >>>>>>>>> + /** > >>>>>>>>> * @writeback_job: Writeback job for writeback connectors > >>>>>>>>> * > >>>>>>>>> * Holds the framebuffer and out-fence for a writeback > >>>> connector. > >>>>>>>>> As @@ -995,6 +1038,12 @@ struct drm_connector { > >>>>>>>>> struct drm_property *content_protection_property; > >>>>>>>>> > >>>>>>>>> /** > >>>>>>>>> + * @colorspace_property: Connector property to set the suitable > >>>>>>>>> + * colorspace supported by the sink. > >>>>>>>>> + */ > >>>>>>>>> + struct drm_property *colorspace_property; > >>>>>>>>> + > >>>>>>>>> + /** > >>>>>>>>> * @path_blob_ptr: > >>>>>>>>> * > >>>>>>>>> * DRM blob property data for the DP MST path property. This > >>>>>>>>> should only @@ -1269,6 +1318,7 @@ int > >>>>>>>>> drm_connector_attach_vrr_capable_property( > >>>>>>>>> int drm_connector_attach_content_protection_property( > >>>>>>>>> struct drm_connector *connector); int > >>>>>>>>> drm_mode_create_aspect_ratio_property(struct drm_device *dev); > >>>>>>>>> +int drm_mode_create_colorspace_property(struct drm_connector > >>>>>>>>> +*connector); > >>>>>>>>> int drm_mode_create_content_type_property(struct drm_device > >>>>>>>>> *dev); void drm_hdmi_avi_infoframe_content_type(struct > >>>>>>>>> hdmi_avi_infoframe > >>>>>>>> *frame, > >>>>>>>>> const struct > >>>> drm_connector_state > >>>>>>>> *conn_state); > >>>>>>>>> -- > >>>>>>>>> 1.9.1 > >>>>>>>>> > >>> _______________________________________________ > >>> Intel-gfx mailing list > >>> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > >>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Ville Syrjälä Intel _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
