> >Request ME FW to start the HDCP2.2 session for an intel port.
> >Prepares payloads for command WIRED_INITIATE_HDCP2_SESSION and sends
> to
> >ME FW.
> >
> >On Success, ME FW will start a HDCP2.2 session for the port and
> >provides the content for HDCP2.2 AKE_Init message.
> >
> >v2: Rebased.
> >v3:
> > cldev is add as a separate parameter [Tomas]
> > Redundant comment and typecast are removed [Tomas]
> >v4:
> > %zd is used for size [Alexander]
> > %s/return -1/return -EIO [Alexander]
> > Spellings in commit msg is fixed [Uma]
> >v5: Rebased.
> >v6:
> > Collected the rb-ed by.
> > Realigning the patches in the series.
> >v7:
> > Adjust to the new mei interface.
> > Fix for kdoc.
> >v8:
> > K-Doc Addition.
> > memcpy for const length.
> >
> >Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
> >Reviewed-by: Uma Shankar <uma.shankar@xxxxxxxxx>
>
> Latest set look ok. You can keep the RB.
>
> >---
> > drivers/misc/mei/hdcp/mei_hdcp.c | 82
> >++++++++++++++++++++++++++++++++++++++++
> > drivers/misc/mei/hdcp/mei_hdcp.h | 28 ++++++++++++++
> > 2 files changed, 110 insertions(+)
> >
> >diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c
> >b/drivers/misc/mei/hdcp/mei_hdcp.c
> >index ca5010ad7dd7..534d29c8ee86 100644
> >--- a/drivers/misc/mei/hdcp/mei_hdcp.c
> >+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
> >@@ -23,6 +23,88 @@
> > #include <linux/slab.h>
> > #include <linux/uuid.h>
> > #include <linux/mei_cl_bus.h>
> >+#include <drm/drm_connector.h>
> >+#include <drm/i915_component.h>
> >+#include <drm/i915_mei_hdcp_interface.h>
> >+
> >+#include "mei_hdcp.h"
> >+
> >+/**
> >+ * mei_initiate_hdcp2_session() - Initiate a Wired HDCP2.2 Tx Session
> >+in ME FW
> >+ * @dev: device corresponding to the mei_cl_device
> >+ * @hdcp_data: Intel HW specific hdcp data
> >+ * @ake_data: AKE_Init msg output.
> >+ *
> >+ * Return: 0 on Success, <0 on Failure.
> >+ */
> >+static int
> >+mei_initiate_hdcp2_session(struct device *dev, struct hdcp_port_data *data,
> >+ struct hdcp2_ake_init *ake_data) {
Breaking naming conventions : all functions should be prefixed with mei_hdcp_
e.g. mei_hdcp_ initiate_session()
> >+ struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } };
> >+ struct wired_cmd_initiate_hdcp2_session_out
> >+ session_init_out = { { 0 } };
> >+ struct mei_cl_device *cldev;
> >+ ssize_t byte;
> >+
> >+ if (!dev || !data || !ake_data)
> >+ return -EINVAL;
> >+
> >+ cldev = to_mei_cl_device(dev);
> >+
> >+ session_init_in.header.api_version = HDCP_API_VERSION;
> >+ session_init_in.header.command_id =
> >WIRED_INITIATE_HDCP2_SESSION;
> >+ session_init_in.header.status = ME_HDCP_STATUS_SUCCESS;
> >+ session_init_in.header.buffer_len =
> >+
> > WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN;
> >+
> >+ session_init_in.port.integrated_port_type = data->port_type;
> >+ session_init_in.port.physical_port = (u8)GET_MEI_DDI_INDEX(data-
> >>port);
> >+ session_init_in.protocol = data->protocol;
> >+
> >+ byte = mei_cldev_send(cldev, (u8 *)&session_init_in,
> >+ sizeof(session_init_in));
> >+ if (byte < 0) {
> >+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
> >+ return byte;
> >+ }
> >+
> >+ byte = mei_cldev_recv(cldev, (u8 *)&session_init_out,
> >+ sizeof(session_init_out));
> >+ if (byte < 0) {
> >+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
> >+ return byte;
> >+ }
> >+
> >+ if (session_init_out.header.status != ME_HDCP_STATUS_SUCCESS) {
> >+ dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
> >+ WIRED_INITIATE_HDCP2_SESSION,
> >+ session_init_out.header.status);
> >+ return -EIO;
> >+ }
> >+
> >+ ake_data->msg_id = HDCP_2_2_AKE_INIT;
> >+ ake_data->tx_caps = session_init_out.tx_caps;
> >+ memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN);
> >+
> >+ return 0;
> >+}
> >+
> >+static __attribute__((unused))
> >+struct i915_hdcp_component_ops mei_hdcp_ops = {
> >+ .owner = THIS_MODULE,
> >+ .initiate_hdcp2_session = mei_initiate_hdcp2_session,
> >+ .verify_receiver_cert_prepare_km = NULL,
> >+ .verify_hprime = NULL,
> >+ .store_pairing_info = NULL,
> >+ .initiate_locality_check = NULL,
> >+ .verify_lprime = NULL,
> >+ .get_session_key = NULL,
> >+ .repeater_check_flow_prepare_ack = NULL,
> >+ .verify_mprime = NULL,
> >+ .enable_hdcp_authentication = NULL,
> >+ .close_hdcp_session = NULL,
> >+};
> >
> > static int mei_hdcp_probe(struct mei_cl_device *cldev,
> > const struct mei_cl_device_id *id) diff --git
> >a/drivers/misc/mei/hdcp/mei_hdcp.h b/drivers/misc/mei/hdcp/mei_hdcp.h
> >index 582a7e27ae29..f831db3cbd54 100644
> >--- a/drivers/misc/mei/hdcp/mei_hdcp.h
> >+++ b/drivers/misc/mei/hdcp/mei_hdcp.h
> >@@ -363,4 +363,32 @@ struct wired_cmd_repeater_auth_stream_req_out {
> > struct hdcp_port_id port;
> > } __packed;
> >
> >+enum mei_hdcp_ddi {
> >+ MEI_DDI_INVALID_PORT = 0x0,
> >+
> >+ MEI_DDI_B = 1,
> >+ MEI_DDI_C,
> >+ MEI_DDI_D,
> >+ MEI_DDI_E,
> >+ MEI_DDI_F,
> >+ MEI_DDI_A = 7,
> >+ MEI_DDI_RANGE_END = MEI_DDI_A,
> >+};
> >+
> >+enum i915_port {
We've already reviewed. Move to i915 header or use mei_ prefix?
> >+ PORT_NONE = -1,
> >+
> >+ PORT_A = 0,
> >+ PORT_B,
> >+ PORT_C,
> >+ PORT_D,
> >+ PORT_E,
> >+ PORT_F,
> >+ I915_MAX_PORTS,
> >+};
> >+
> >+#define GET_MEI_DDI_INDEX(p) ({
> > \
> >+ enum i915_port __p = (enum i915_port)(p); \
> >+ __p == PORT_A ? MEI_DDI_A : (enum mei_hdcp_ddi)__p;
> \
> >+})
> > #endif /* __MEI_HDCP_H__ */
> >--
> >2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
