Save the GMBUS2 value read while polling for state changes, and then
reuse this value when determining for which reason the loops were exited.
This is a small optimization which saves a couple of bus accesses for
memory mapped IO registers.
To avoid "assigning in if clause" checkpatch errors", use a ret variable
to store the wait_for macro return value.
Signed-off-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_i2c.c | 33 +++++++++++++++++++++------------
1 files changed, 21 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index cb1db10..2865313 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -219,13 +219,16 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
GMBUS_SLAVE_READ | GMBUS_SW_RDY);
POSTING_READ(GMBUS2 + reg_offset);
do {
+ int ret;
u32 val, loop = 0;
+ u32 gmbus2;
- if (wait_for(I915_READ(GMBUS2 + reg_offset) &
- (GMBUS_SATOER | GMBUS_HW_RDY),
- 50))
+ ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
+ (GMBUS_SATOER | GMBUS_HW_RDY),
+ 50);
+ if (ret)
return -ETIMEDOUT;
- if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ if (gmbus2 & GMBUS_SATOER)
return -ENXIO;
val = I915_READ(GMBUS3 + reg_offset);
@@ -260,6 +263,9 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
POSTING_READ(GMBUS2 + reg_offset);
while (len) {
+ int ret;
+ u32 gmbus2;
+
val = loop = 0;
do {
val |= *buf++ << (8 * loop);
@@ -268,11 +274,12 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
I915_WRITE(GMBUS3 + reg_offset, val);
POSTING_READ(GMBUS2 + reg_offset);
- if (wait_for(I915_READ(GMBUS2 + reg_offset) &
- (GMBUS_SATOER | GMBUS_HW_RDY),
- 50))
+ ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
+ (GMBUS_SATOER | GMBUS_HW_RDY),
+ 50);
+ if (ret)
return -ETIMEDOUT;
- if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ if (gmbus2 & GMBUS_SATOER)
return -ENXIO;
}
return 0;
@@ -304,6 +311,7 @@ gmbus_xfer(struct i2c_adapter *adapter,
for (i = 0; i < num; i++) {
bool last = i + 1 == num;
u32 gmbus1 = 0;
+ u32 gmbus2;
u32 gmbus5 = 0;
/*
@@ -338,11 +346,12 @@ gmbus_xfer(struct i2c_adapter *adapter,
if (ret == -ENXIO)
goto clear_err;
- if (wait_for(I915_READ(GMBUS2 + reg_offset) &
- (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE),
- 50))
+ ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) &
+ (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE),
+ 50);
+ if (ret)
goto timeout;
- if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ if (gmbus2 & GMBUS_SATOER)
goto clear_err;
}
--
1.7.7.3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
